2. Fisher & Paykel
  3. CG365DLPX1 N 36 Inch LPG Gas on Steel Cooktop

Fisher & Paykel CG365DLPX1 N 36 Inch LPG Gas on Steel Cooktop User guide

  • Hello! I'm a chat assistant and I have analyzed the provided datasheet for Fisher&Paykel CG365DNGX1 and CG365DLPX1 Gas Cooktops. This document provides detailed information about dimensions, clearances, and cutout requirements essential for installation. Feel free to ask me any questions you have regarding these specifications or other details mentioned.
  • What is the minimum clearance from the left edge of the product to the nearest vertical surface?
    What is the minimum clearance from the rear edge of the product to the nearest combustible surface?
    What is the overall width of the cutout?
6" GAS ON STEEL COOKTOP
Model no:
CG365DNGX1 (refer page 2 for metric measurements)
CG365DLPX1
Dimensions
in
A Height of chassis (below top of countertop)
2 5/16''
B Overall width of cooktop
5 7/16''
c Overall depth of cooktop
20 7/8''
D Height from counter datum to top of cooktop surface
1/4''
E Depth of front control panel
 11/2''
F Depth of cooktop cooking area
17 1/2''
G Width of chassis
 11/16''
H Depth of chassis
19 1/8''
I Distance from top of counter to centre of gas inlet on
product
1 /16''
Minimum Clearances
in
Minimum clearance from left edge of product to nearest vertical
surface
5 1/8''
Minimum clearance from right edge of product to nearest
vertical surface
4 17/2''
Minimum clearance from rear edge of product to nearest
combustible surface
6 5/16''
Minimum clearance from rear edge of product to nearest non-
combustible surface
1 25/2''
Minimum clearance from front edge of counter to front edge
of product
1 1/4''
Minimum clearance from cooking surface to combustible
surface centered above the cooking surface
6''
Maximum overall depth of overhead cabinetry
1''
Minimum clearance below top of countertop to nearest
combustible surface
2 /4''
Minimum clearance below top of countertop to Fisher & Paykel
oven or nearest non-combustible surface
2 9/16''
Cutout Dimensions
in
Overall width of cutout*
4 1/16"
Overall depth of cutout*
19 9/2''
* Note cutout position is centred to the cooktop width but offset to the
cooktop depth. Cutout front depth is /8'' from the front edge of the product.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
INDICATES CUTOUT --------------------------------------------------------
DATE: 1.07.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(/2''). Please read the installation manual for detailed information on
installing the product. www.fisherpaykel.com
DATA SHEET
DATUM :
TOP OF COUNTERTOP
5-7/16''
B
G
20-7/8''
C
F
E
D
A
I
CLEARANCE : COMBUSTIBLE SURFACE
CLEARANCE : NONCOMBUSTIBLE SURFACE
FRONT VIEW
PLAN VIEW
H
PROFILE VIEW
CLEARANCE : NONCOMBUSTIBLE SURFACE
CLEARANCE : COMBUSTIBLE SURFACE
CLEARANCE : COMBUSTIBLE SURFACE
FRONT EDGE OF COUNTER
6" GAS ON STEEL COOKTOP
Model no:
CG365DNGX1 (refer page 1 for imperial measurements)
CG365DLPX1
Dimensions
mm
A Height of chassis (below top of countertop)
59
B Overall width of cooktop
900
c Overall depth of cooktop
50
D Height from counter datum to top of cooktop surface
6
E Depth of front control panel
85
F Depth of cooktop cooking area
442
G Width of chassis
856
H Depth of chassis
486
I Distance from top of counter to centre of gas inlet on
product
0
Minimum Clearances
mm
Minimum clearance from left edge of product to nearest vertical
surface
10
Minimum clearance from right edge of product to nearest
vertical surface
115
Minimum clearance from rear edge of product to nearest
combustible surface
160
Minimum clearance from rear edge of product to nearest non-
combustible surface
45
Minimum clearance from front edge of counter to front edge
of product
2
Minimum clearance from cooking surface to combustible
surface centered above the cooking surface
915
Maximum overall depth of overhead cabinetry
0
Minimum clearance below top of countertop to nearest
combustible surface
70
Minimum clearance below top of countertop to Fisher & Paykel
oven or nearest non-combustible surface
65
Cutout Dimensions
mm
Overall width of cutout*
865
Overall depth of cutout*
490
* Note cutout position is centred to the cooktop width but offset to the
cooktop depth. Cutout front depth is 9mm from the front edge of the product.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
INDICATES CUTOUT --------------------------------------------------------
DATE: 1.07.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(/2''). Please read the installation manual for detailed information on
installing the product. www.fisherpaykel.com
DATA SHEET
DATUM :
TOP OF COUNTERTOP
B
G
C
F
E
D
A
I
CLEARANCE : COMBUSTIBLE SURFACE
CLEARANCE : NONCOMBUSTIBLE SURFACE
FRONT VIEW
PLAN VIEW
H
PROFILE VIEW
CLEARANCE : NONCOMBUSTIBLE SURFACE
CLEARANCE : COMBUSTIBLE SURFACE
FRONT EDGE OF COUNTER
CLEARANCE : COMBUSTIBLE SURFACE
900
50
/