2. Jabra
  3. PanaCast 50
PanaCast 50

Jabra PanaCast 50 User manual

  • Hello! I have reviewed the document for the Jabra PanaCast 50. It outlines the steps for manually resetting the device to its factory default settings, including how to use the reset button and what LED indicators to look for. I'm ready to assist you with any questions you have about this process or other aspects of the device.
  • Where is the reset button located on the Jabra PanaCast 50?
    What color does the LED flash when the reset button is pressed?
    What happens when the reset is complete?
    What settings are reset when I reset the Jabra PanaCast 50?
Jabra PanaCast 50 - Black
How do I manually reset the Jabra PanaCast 50?
To reset the Jabra PanaCast 50 to the factory default settings, follow
these steps.
1. Press and hold the Reset button, located on the back of the video bar,
until the LED flashes purple.
2. Release the Reset button. After a few seconds, the LED will pulse
white. The device will then emit a brief sound to indicate that the reset
is complete.
Note
When you reset the Jabra PanaCast 50, all configured settings are reset
and will need to be reconfigured. This includes the password protection
and the setup with Jabra Xpress.
04/09/2022 05:18
https://www.jabra.in/supportpages/jabra-panacast-50/8200-234/faq/70840ef5-3f98-41dd-
9ede-c20a41af74c8
Page 1 of 1
/