Angelo Decor AD74012 Operating instructions

Thank you for buying an Angelo Décor Spouting Statue!

We hope you will find these instructions helpful in setting up your spouting statue.

If you have any issues with this item, please DO NOT return the unit to place of purchase.

Please visit our web site, www.angelodecor.com, for assistance and warranty information.

First unpack carton carefully, arranging parts safely in your working area.

Adjust the pump to the desired Connect the included tubing to the Place the pump inside the

setting. We recommend the max pump as shown above. reservoir,pond or water feature.

setting but this can be adjusted

depending on the application.

Connect the tubing to the spouting Align the tubing with the grove The spouting statue can be placed

statue. of the spouting statue. This will directly on the edge of the desired

prevent the tubing from becoming water feature or as far as 12 inches

blocked and restricting flow. away, depending on the application.

Please refer to "Before you Begin" page for maintenance information.