Toto TLP01701J Installation guide

Brand: Toto

Model: TLP01701J

Type: Installation guide

Toto TLP01701J is an auto faucet with a hands-free motion sensor that allows you to easily turn the water on and off with a wave of your hand. It also features a variety of other functions, including:

Continuous water mode: Hold your hand over the sensor for 3 seconds or longer to activate continuous water flow for up to 1 minute.
Cleaning mode: Hold your hand over the sensor for 10-15 seconds to turn off the water flow for up to 1 minute. This is useful for cleaning the sink or faucet.
Cold water priority mode: This mode helps to save energy by preventing the wasteful use of hot water.

Continuous water mode: Hold your hand over the sensor for 3 seconds or longer to activate continuous water flow for up to 1 minute.
Cleaning mode: Hold your hand over the sensor for 10-15 seconds to turn off the water flow for up to 1 minute. This is useful for cleaning the sink or faucet.
Cold water priority mode: This mode helps to save energy by preventing the wasteful use of hot water.

2017.803N41E

᯳ᐛ䈪᱄Ҝ

Installation Manual

AUTO FAUCET

䶔᧛䀜ᕅ≪౪

δ㠠ࣞ᝕ᓊ≪౪ε

TLP01701J+TLP01702B

-1-

䆜઀ ⌞ᝅ

ޗંߎ߸۱ଚङӄؠ୪ન҅ऀޞͫՕਈѫحਚыմ࠸р۪Չ୍ѯ澞

؍੸ߎфսͫબ׹ۺՠࡣ૏ૅङЋЏыմ؍੸澞

ޗંߎ߸۱ଚङӄؠ୪ન҅ऀޞͫՕਈѫحਚыմՉѯְ۪݃ીф澞

͆

࠻ஞыבՃ޴ԃਈԃ৞஘չٯજ৞Шৱͧԕܬҩॿͨ஬֨ЋыडܔЈ҅ऀߎфս澞

͆બԓ҅ऀߠ਍Љ६ङऄ࢛ݖڇ澞իөՕਈଭۨࢮࢳͫઇऄঈ澞

͆બԓرࡊ࢚֨ऄ࢛ݖף۪ݏӲୂ澞իөՕਈحਚࢮࢳ澝ઇऄ澞

͆બԓ҅ऀܶؔऄ࢛ͧ')<ͨљיङऄ࢛澞իөՕਈحਚࢮࢳ澝ઇऄ澞

͆બЉ੽૝ӟݖڇ۪݌ি֘Ӏङௌؔԅࣤ澞իөՕਈحਚࢮࢳ澞

͆બԓڠ੧ڝ޼澝Ԇٗ澝ܑՌ澝܀޼澝ܞܱ݃ѯऄিЭબԓ֨ऄিЇݹ৥୍࣒澝

צѻ۪Ԇࢽऄিչݖףঈ澞

իөՕਈحਚࢮࢳ澞

͆બԓԆٗऄ࢛িͧӤލ澝ݎ৒ऄিͨ澞իөՕਈଭۨࢮࢳͫݻஞঈзݻ澞

͆Ӓࢽࡊ঒બԓ੸Ն澞

͆બԓ֨ࢽࡊ҈ো࢓چ૝ଋȭङەӑЈ҅ऀ澞

͆બԓऀ࢘۴ݖܣऄ࢛ݖף澞իөՕਈحਚઇऄ澞

͆۸பޞͫબԓઇݧऄিݖף澞իөՕਈଭۨઇऄ澞

͆ॗ࠲֨Օਈ䃷ࡊͫ੮வৈரङࢀঈ䉸࢘֫۱҅ऀ澞իөՕਈږ૜ݻஞ澝ࢥऄ澞

͆্ثॗ࠲ӣઆ۪ғࣲ澝ݷଭ澞իөՕਈږ૜ݻஞ澝ઇऄ澞

͆બԇڷৰਖ਼ऄ࢛ݖڇ۪அࡊݖڇङ؍੸ѹ৥ͫљҲ଒ࡊ঒Їৈдரࡊ۪҅ऀޞ

ङࡊࢤ࢚֨ऄ࢛ݖڇ۪அࡊݖڇ澞

͆ࢎ࡮ଋࢡৠޞڷீүҼ୻࠲ࡊߺͫӇܜԳଋࢡৠत澞իөՕਈ֜Ӓࢽࡊङ֕ӟ

৲ଭۨࢼѯ澝؟ڈીфङࡑ݃ঈ澞

͆ݖڇ؍੸ѹ৥ځঅՠबҼગઋઁਸ澞

͆ܣӟऄ࢛ݖףޞͫબԇڷݗѻݖףߎѽܣӟ澞ײߧܞ܂ऄ࢛িѫ҅ݖף۪ऄ࢛

িՉ݃ͫحਚࢮࢳ۪ઇऄ澞

͆બԇڷرݖףेؘ֪ݖӱڂ澞իөՕਈحਚࢮࢳ۪ઇऄ澞

͆Љ੽ޑԆڠԃ۪ӏӠ澞իөՕਈ֜ॄ݃ѯՃы૯۪ӟ࣫ݻஞЊࢥࡊ澞

͆બԓ؍੸֨૱怾澝ਥ叆ঈ१Ԉ࣒ѽЇ澞

͆બԓ֨י۪Օਈৈӎङ֪ސ҅ऀ澞իөՕਈحਚୂўॄ݃ͫђ৲֜ࢥࡊ䂫࢘

ી࣒ਚ҅ી࣒Չ݃澞

͆ؔߊͧ࠿߃▲ࠩࢎஔ஍֨ऄ࢛ݖףङݖ࣌ঈЇङࢱظͫٷԇڷرऄ࢛ݖףे

ؘݖӱڂ澞

͆Љ੽଒੧ભײ؍੸ளߎфսৈߣனўљיङୂў澝۪ՈЈனўঈݷ੸澞իөՕ

ਈحਚઇऄ۪ݻஞঈ澞࠴יՕਈ݃ѯфսۅਈͫحਚࢼѯ炔Չѯ澝֜ࢥࡊحਚ

䂫࢘ીф澝ਚ҅ી࣒Չ݃澞

͆ளЋЏ৓ғыմ্ثЉਈ֨ࠒғਸ֠יͫܜઆ澝ғࣲ澝ݷଭфս澞իөՕਈږ

૜ݻஞ澝ઇऄ澞

͆બԇڷؔߊͧ࠿▲ٶДࠩљЇेઍ୆঒Ճҿյ֠ͧ߱߫ӄ澝ࠒ߲Սӄঈͨ߄

ޗՇࣿࢥࡊ۪ݣݢ࣫઻澞

͆Оґચ؍Ҷબؔߊ޾݅ଢ࠲ஂ澞

ਲ਼ଢ࠲ஂЉਈ࠳ٯٗҁ۪ͫଭۨզࡊଢࡶ澞࠴יЭՕਈଭۨࢥࡊঈ۞יзݻङ

Շࣿ澞

͆Оेґ࠳ٯ҅ऀͫӒࡊ҈ࡊԹԃڷீ௤й۪ঈйࢽࡊ҈ࡊԹԃ澞҈ࢽࡊԹԃײ

ߧ௤йӒࡊԹԃͫرحਚޗࡣ࠳ٯલਭ࢓چ۪ଭۨࢼѯ澞

͆֨҅ऀޞબԓׇѻզࡊՍ澞իөࡊѫђզࡊՍߎѽୂӣ࢐ҵଭۨࢥࡊͫђ৲ح

ਚ҅؟ӀીфঈଶՉ݃עङзݻՇࣿ澞

͆࣒ўӟ࣫ߠԈޞબՃޞ৓ܔ澞

͆બԓثऄ斂ك੮வޑԆڠԃ۪ӏӠ澞

͆બԓ҅ऀஔИۅ࡮䃒ӷљיङࢎ࡬ӷ澞

͆୸ߊЉ҅ऀޞͫબԇڷܣӟऄ࢛ݖף澞իөՕਈحਚࢮࢳ۪ઇऄ澞

-2-

CautionWarning

This symbol means that improper use of the product counter to

the information in this column may lead to death or serious injury.

Do not use an unstable outlet.

Do not wet the power plug or electrical parts.

Do not use any power supply other than the one specified.

Do no use any outlet or wiring equipment beyond its specified rating.

Do not damage the power cord or power plug.

Do not damage, modify , bend forcibly, twist, pull, pinch, heat or put heavy

objects on the power cord or power plug .

Do not modify (cut or extend) the power cord.

Do not connect cold and hot water pipes backwards.

Do not use supplied water hotter than 85

Do not insert or pull out the power plug with wet hands.

Do not touch the power plug during thunderstorms.

Do not install the product in a humid place like a bathroom .

Never disassemble, repair or remodel the product.

Select the outlet mounting location so that condensation on the water

supply pipe and water splashed during use of the product do not contact

the outlet, or consider using a water-proof outlet .

When cleaning the filter , close the water shutoff valve before loosening the lid.

Also, check that the filter on the hot water side is not hot.

Mount the outlet in a location higher than 100 mm from the floor .

When pulling out the power plug, be sure to hold the plug by the body .

Insert the power plug all the way to the base.

This symbol means that improper use of the product counter to

the information in this column may lead to injury or property

damage.

Do not subject to strong force or impacts.

Do not install the product on moving vehicles such as wheeled vehicles or

boats.

Do not install the product outdoors or in a place where freezing is anticipated.

Remove dust and dirt that accumulate on the blades of the power plug at

a regular interval (once a month) and insert the power plug all the way to

the base.

Do not remodel this product by installing parts that do not belong to it or

removing parts from it.

Do not disassemble and remodel the parts described in this manual.

Check around pipes (inside the cabinet, spy window , etc.) at regular intervals

(more than twice a year) for water leakage and rattling .

Replace the check valve regularly for safety sake.

In order to prevent scalding due to improper operation, adjust the cold water

supply pressure higher than the hot water supply pressure or to the same

pressure.

Do not block the water spouting hole when you use the wand.

Do not leave abnormalities unaddressed, such as rattling parts.

Do not hit or operate plated parts with undue force.

Do not use cleaning agents other than neutral detergent.

If the product is not to be used for a long period of time, pull out the power

plug.

-3-

(mm)

Set-up Drawing

ᐹ㖤ഴ

Component

㔉ᶺ䜞Ԭ

800

555

350±10

260

325

HOT100±10

ࢽࡊr

COLD95±25

Ӓࡊr

150

100

Φ25ν29

֨Ѯ۟֘ङࠒࡹਸ֠SSљӄ

Љځ߄ஞॉ࣒澞

There should be no obstacles

within the 300mm detectable

area of the sensor.

-4-

Installation Procedure

᯳ᐛ↛僚

95mm

-5-

ޯପࠥڔ

Normal mode

ֵ⭞ᯯ⌋

How to use

6 17

8 9

-6-

3ॡ

3sec

60ॡ

60sec

10~15ॡ

10-15sec

60ॡ

60sec

ࠥڔલਭ

Mode adjustment

କ৒ӟࡊࠥڔ

Continuous water mode

ࢎ࡬ࠥڔ

Cleaning mode

-7-

㿺Ṳ

ऄԹ

۟ځ֘ࠒࡹਸ֠

')<

ਘ؆ԅਈνSS

߂Ѻڷ੽ࡊԹ澜36GͧԈԹԃͨ

߂ם҅ऀࡊԹ36GͧலԹԃͨ

҅ऀࡊԹ

-଒ࡊ঒ଳକݎ夊়ઁࠀ

2ӣզࡊࡶ୏

঴ࡊݼঈ঴

ȭ҅ऀ࣪׋࢓چ

رא஍਌؍੸֨׌אЇ澞

ܜЈݏӲ֘ґܔत澞

؍੸૷঒澞

رݏӲୂ؍੸ӱא஍਌ङӟՍה澞

ر଒ࡊ૷঒କݎӱא஍਌ङҵՍה澞

؍੸ࡊ֗ߎѽ澞

ܷࣁ஬੽Ӥލ૷঒҅ऀ澞

କݎДЗ۟ځ֘ݎݖўͧग਩ͨͫफ

ਙՇӟȔ⫏⬅ȕג澞

Љӣ٘՘ͧӀѽՀৰޑٗ࠵௢ͨ澞

ࣞ֒

• ѵӟ۴ͫࡊؼѫࡶӟ澞

• ঢ়֛۴ͫࡊؼѫҠ࠲澞

• ݷՊݏӲ֘*/6ڐҼङગؔࠥڔͫؼՕગؔОײЈࠥڔ澞

କ৒ӟࡊࠥڔ

֨঒Սҋङ۟ځ֘ͫՕљۼ੧ࣔ࠺ݱҁ澞

࠳ٯ҅ऀࠥڔ

ر۴ѵӱҋவ۟ځ֘ॡљЇՕ߂୸զࡊ▲ӣ୕澞Ӈࠩѵ۴ਙҋவ۟ځ֘

ӟࡊҠ࠲澞

ࢎ࡬ࠥڔ

֨঒Սҋङ۟ځ֘ͫՕљۼ੧ࣔ࠺ݱҁ澞

ر۴ଷѻѮ۟֘ॡ୕ͫॡ୕ࠥڔܶॐࢰؼѫࣂࢯ澞߂୸ӣ୕Љѫզࡊ澞

Ӈࠩѵ۴ਙҋவ۟ځ֘ՊОզࡊࣙہ澞

؍੸ݏӲୂґܔ儺澞

ݖҵऄ࢛ݖף澞

᯳ᐛ↛僚

Specifications

Power supply

Sensor detection range

AC 100ν240V

Sensor is self-adjusting (130~200mm)

minimum required water pressure 0.05MPa (Flowing)

maximum water pressure 1.0MPa

Water supply pressure

G3/8Water supply connection

3L/minFlow rate

0~40°CAmbient temperature

Mount the bracket on the wall.

Remove the controller cover.

Connect the hose.

Connect the controller to the water

inlet braket.

Connect the flexible hose to the

bracket inlet.

Fasten the spout.

Cut the hose if necessary.

Insert the sensor connector

(white×2) till it stops with a click.

It is no problem to insert it in either

right or left one.

Insert the (white,orange) connector

of LED Unit till it stops with a click.

Operation

• (Water comes out when you hold out your hand.)

• (Water stops when you withdraw your hand.)

• The mode shown below can be engaged by changing the DIP switches of the controller.

Continuous water spouting mode

If you trigger sensor detection for 3 sec. or longer, water spouts for 1 min. at a maximum.

If you trigger sensor detection again, water stops spouting.

Cold water priority mode

This function prevents the wasteful use of hot water. Even after the hot water

is used, this function returns to the “Cold water mode”.

Equipment protection wash

If no one uses the product for 24 hours since it was used the last time, water

spouts automatically for 5 sec.

Cleaning mode

If you hold your hand over the sensor for 10 sec., the indication lamp turns off

for 5 sec. If you leave your hand over the sensor while the indication lamp is

off, no water is discharged for a maximum of 1 min.

If you trigger sensor detection again, water spouts.

Attach the controller cover.

Insert the power plug.

Installation Procedure

ࡊѩүࠥڔ

Оஅ࠲ࡾો҅ऀࢽࡊङࠥڔ澞ԯ҅҅ऀࢽࡊեЭՕਘԈۊז澨ࡊࠥڔ澩澞

ગוґܔ࡮Ӕ

ђ߂ե҅ऀեشޞЉ҅ऀޞͫՕљਘԈ଒੧ॡ୕݌ࡊ澞

Normal mode

-8-

Toto TLP01701J Installation guide

Brand: Toto

Model: TLP01701J

Type: Installation guide

Continuous water mode: Hold your hand over the sensor for 3 seconds or longer to activate continuous water flow for up to 1 minute.
Cleaning mode: Hold your hand over the sensor for 10-15 seconds to turn off the water flow for up to 1 minute. This is useful for cleaning the sink or faucet.
Cold water priority mode: This mode helps to save energy by preventing the wasteful use of hot water.

Download PDF

report

Toto TLP01701J Installation guide

Toto TLP01701J Installation guide

Related papers

Other documents