2. Computers & electronics
  3. Networking
  4. Routers
  5. solplanet
  6. QG0035 WLAN/LAN-Stick Dual Band

solplanet QG0035 WLAN/LAN-Stick Dual Band User manual

  • Hello! I'm your chat assistant. I've reviewed the user manual for the AiSWEI WLAN/LAN-Stick. This document details the installation, features, and troubleshooting for the device, which is a smart data collection device for inverters. I'm ready to answer any questions you might have about this device described in the document, such as its network connection, LED indicators and installation process.
  • What are the two connection types available for the WLAN/LAN-Stick?
    What does a blinking blue LED indicate?
    What should I do if the green LED is off?
    What should I do before connecting network cable?
DownloadandinstalltheSolplanetappby
scanningtheQRcodebelow.
EMEA
Serviceemail:service.EMEA@solplanet.net
APAC
Serviceemail:service.APAC@solplanet.net
LATAM
Serviceemail:service.LATAM@solplanet.net
AisweiGreaterChina
Serviceemail:service.china@aiswei-tech.com
Hotline:+864008019996
Taiwan
Serviceemail:service.taiwan@aiswei-tech.com
Hotline:+886809089212
https://solplanet.net/contact-us/
LEDindicatorsandtroubleshooting
Contact
QualificationCertification
Thisproducthaspassedthefactoryqualitycheckcontrol
BlueLED:Networkcommunicationindicator
PlantMonitoring
Appdownload
GreenLEDisoff:Stickhardwarefault,
Pleasecontactourservice.
GreenLEDison:Datacollectionisnormal.
BlueLEDisblinking:TheWLAN/LAN-Stickhas
connectedtotherouterandobtainedan
address,butcannotconnecttothecloud.
Pleasecheckyourrouterconfigurationor
contactourafter-salesservice.
BlueLEDisoff:theWLAN/LAN-Stickisnot
connectedtothecloudserver.
●
●
●
●
BlueLEDlightstayson:theWLAN/LAN-Stickis
connectedtothecloudserver.
1.OpentheSolplanetAPP.Aftercompleting
accountregistrationandhavingloggedin,click
onthe“+”icontocreateapowerplant.For
details,pleaserefertotheAPPusermanual.
Note:TheWLAN/LAN-StickusesEthernetbydefault,ifyou
wanttouseWiFitouploaddata,pleasedisconnectthe
Ethernetconnection.InEthernetmode,WLAN/LAN-Stick
defaultstoDynamicHostConfigurationProtocol(DHCP).
Accountregistrationandplantcreation
GreenLED:Invertercommunicationindicator
●
Android/iOS
WLAN/LAN-Stick

UserManual
ProductOverview Productschema InstallationGuide
Productfeatures
WLAN/LAN-Stickisasmartdatacollection
devicedevelopedbyAiSWEI.Itisusedtocollect
theoperatingdataofinvertersanduploadthe
datatothecloud.
Pleaseremovetheanti-dustcapofthe
connectorontheinverterbyrotating
anti-clockwise.
ToremovetheStickfromtheinverter,turnthe
floatingscrewcounterclockwiseasshowninthe
figurebelow.AfterremovingtheStick,tighten
theanti-dustcapclockwisetoensureinverter
protection.
● Remotefirmwareupdate
● Networkdiagnosis
● LEDindicators
● Plug-inandPlay
● Automaticresumptionofdatatransmission
uponnetworkrecovery
● IP65ratedenclosureprotection
Caution:Pleasedonotrotatethe
bodyoftheStickduringinstallation
orremoval.
WLAN/LAN-Stickhastwotypesdependingon
howitconnectstotheinverter:
①USBconnector
②Aviationconnector
Insertthestickandtightenthefloatingscrew
clockwise.Asshownbelow.
①Bolt:locksthenetworkcable
②BlueLED:Indicatorfornetworkcommunication
③GreenLED:Indicatorforinvertercommunication
④Productlabel:showsproductinformation
Note:LEDwilllightuponlyafterstickispoweredon.
⑤Rotatingnut:Stickconnectiontotheinverter
or
↑
↑
①
②
X
*Onlyuseanetworkcablewithoutaprotection
capasthecapwillnotfitintotheconnector.
PackingList
No.
Stick
UserManual
1
1
1
2
Name Quatity
3Antenna 1
/ 2 3 4 5 6 7 8 9 1 2 3
Wlan/ Lan-Sti ck
产品料号 /PN：Bx xxxx-x x-xx P
序列号/SN：XXXXXXXXXXXX
注册码/ Regist rati onCod e：XX XXXX XXXX XXXX XX
拆装时请不 要旋转本 体/Donotrotate t hebod yduri ngdism antl ing
① ② ③ ④ ⑤
networkcable
bolt
maincasing maincasing networkport
Pressthesnapsonbothsidesofthestickto
openthecasing(Note:trynottotouchthe
PCBAcomponent)
Unscrewtheboltandpullouttherubberplug,
passthenetworkcableheadsuccessively
throughthenut,rubberplug,case,andthen
intothenetworkport.
Fastenthemaincasing,inserttherubberplug,
andtightenthescrewinsequencetocomplete
networkcableinstallation.
①
②
①
②
↑
/