Smart Board 6000 Smart Class Rooms Display User manual

Type
User manual

This manual is also suitable for

Need some help with your display?
Check out these basic troubleshooting tips.
SMARTBoard® 6000
Turn on the display
Press the Standby button on the front control
panel.
OR
If the Wake to Touch option is enabled, the
display turns on when you touch the screen.
1. Standby
2. Input Select
3. Mute
4. Decrease
5. Increase
6. Move Up (menu)*
7. Move Down (menu)*
8. Menu*
*SPNL-6000-V3 only
Show the connected computer's
desktop
After connecting a computer, press the Input
Select button on the front control panel until
HDMI1,HDMI2 or DisplayPort is selected.
NOTE: Be sure to enable touch control of your
computer by connecting a USB cable between
the USB port in the display’s side connection
panel and a USB connector on your computer.
Use the iQ features
The display includes iQ features that you can
use without connecting a computer. To access
these features, tap the Home button at
the bottom of the screen.
OR
Press the Input Select button on the front
control panel until OPS is selected.
NOTE: The option you select to use the board’s
iQ features varies with the model. Select iQ or
the option that includes OPS (OPS,OPS display
port, or OPS HDMI).
You can then use all the iQ features described in
the SMARTBoard display teacher guide
(smarttech.com/displayteacherguide).
© 2020SMARTTechnologiesULC. All rights reserved. SMARTBoard, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of SMARTTechnologiesULC in the U.S. and/or other countries. All
third-party product and company names may be trademarks of their respective owners. Contents are subject to change without notice. December 11, 2020.
smarttech.com/kb/171536
  • Page 1 1

Smart Board 6000 Smart Class Rooms Display User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI