2. Home
  3. Home security & automation
  4. Security camera accessories
  5. Axis
  6. P3727-PLE
P3727-PLE

Axis P3727-PLE User manual

  • Hello, I have reviewed the Repainting Instructions for the AXIS P3727-PLE Network Camera. This document provides a guide to safely and effectively repaint your device. It covers important steps such as disassembly, masking and pretreatment of parts and also points out risks related to the process. I'm ready to answer any questions you have about the repainting procedures outlined in this document.
  • Can I repaint the camera?
    What are the risks involved in repainting?
    Do I need to prepare the parts before painting?
AXISP3727-PLENetworkCamera
RepaintingInstructions
AXISP3727-PLENetworkCamera
Impactonwarranty
Impactonwarranty
ThisproductisapprovedforrepaintbyAxis,providedthatyoufollowtheinstructionsinthisdocumentandat
axis.com/warranty-implication-when-repainting.
Riskswithrepainting
ThereareseveralriskswhendisassemblingorassemblinganAxisproduct.Thereisalwaysacertainyieldlossduringassembly.Training
ofoperatorsandtheuseofcorrecttoolsmediatessomeoftheproblemsbuttheycanneverbefullyavoided.Someoftherisksinclude:
ESDDamage-AlwayshandletheproductinanESDsafeenvironment.EvenifprecautionsaretakenthereisalwaysariskofESD
damage.Thedamagecanremainundetectedandcauseproblemsduringthelifetimeoftheequipment.
Dustcontamination-Openingacameramayexposethelensandsensortodustorpaint.Dustwillaffecttheopticalperformance.
Lensesneedtobedisassembledinadust-freeenvironment,preferablyacleanroom.
Paintoverspray-Maskingthedifferentcomponentsoftheequipmentiscritical.Failuretomasksensitiveareascancauseproblems
withassemblingtheequipment.Anyareasthatarenotpaintedatfactoryorhaveadifferentsurfacetreatmentthantherestofthe
parts(threads,groundandelectricalcontactsurfaces)mustalsobemaskedtoensurefunction.
2
AXISP3727-PLENetworkCamera
Repainttheproduct
Repainttheproduct
Preparations
•Ifapplicable,disassemblethedeviceaccordingtotheinstructionsinthisdocument.
•Cleanallpartstoberepaintedthoroughlytoremovegrease,dust,oroil.
•Toensurereassemblyandfunctionalityoftheproduct,maskanyopenings(forexampleforscrews,LEDindicators,
ormicrophones)beforeyoupaint.
Pretreatmentofparts
Dependingonthepartmaterialandtypeofpaintappliedatfactory,differentpretreatmentshouldbedoneforthenewpaintto
adhereaswellaspossible.Cleanthepartsproperlytoremoveoil,greaseanddust.
Formoreinformationonthematerialsusedintheproduct,seeitsdatasheetataxis.com.
Powdercoatedparts-Useaprimer.Alternatively,removetheoriginalpowdercoatingdowntothebasematerial,usingne
sandpaper,andcleanthepartsbeforepainting.
Anodisedandchromatedparts-Useaprimer.
Uncoatedstainlesssteel-Nospecialpretreatmentisneeded,butmakesurethatthesurfaceiscleanbeforepainting.
Plastic-Useaprimer.
Disassembly
TR20
4x
1.Removethescrews.
2.Removethedomecover.
3
AXISP3727-PLENetworkCamera
Repainttheproduct
4x
3.Removethedomeandtheplasticholderfromthedomecover.
Repainting
1.Makesureallnecessarypreparationsofthedomecoverhavebeenmade.SeePreparationsonpage3.
2.Applyathinandevenlayerofspraypaintaccordingtotheinstructionsofthepaintmanufacturer.
3.Letthepaintdry.
4.Togetabettercoverageandclearercolor,applyasecondlayerofspraypaint.
5.Whenthepaintisdry,removethemasking.
4
AXISP3727-PLENetworkCamera
Repainttheproduct
Reassembly
1.Puttheplasticholderbackinit’splaceinsidethedomecover.
2.Lineupthedometothedomecoverasshownintheimageandsnapthetwopartstogether(4snaps).
5
AXISP3727-PLENetworkCamera
Repainttheproduct
TR20
4x
3.Reassemblethedomecoverandthecameraunitandtightenthescrews(torque1.0Nm,0.7lbft).
6
RepaintingInstructionsVer.M1.4
AXISP3727-PLENetworkCameraDate:June2021
©AxisCommunicationsAB,2021PartNo.T10168338
/