2. Axis
  3. P1455-LE
P1455-LE

Axis P1455-LE User manual

  • Hello! I'm here to assist you with the repainting instructions for AXIS P14 and Q19 camera series. This document provides a detailed guide on how to safely disassemble, prepare, paint, and reassemble the camera components while minimizing risks. I'm ready to answer any questions you have about the process or the specific instructions given in this document.
  • What is the impact on warranty when repainting the camera?
    What are the risks of disassembling the camera?
    What parts should be masked prior to repainting?
AXISP14andAXISQ19CameraSeries
AXISP1455-LENetworkCamera
AXISP1455-LE29mmNetworkCamera
AXISP1467-LEBulletCamera
AXISP1468-LEBulletCamera
AXISQ1951-EThermalCamera
AXISQ1952-EThermalCamera
RepaintingInstructions
AXISP14andAXISQ19CameraSeries
Impactonwarranty
Impactonwarranty
ThisproductisapprovedforrepaintbyAxis,providedthatyoufollowtheinstructionsinthisdocumentandat
axis.com/warranty-implication-when-repainting.
Riskswithrepainting
ThereareseveralriskswhendisassemblingorassemblinganAxisproduct.Thereisalwaysacertainyieldlossduringassembly.Training
ofoperatorsandtheuseofcorrecttoolsmediatessomeoftheproblemsbuttheycanneverbefullyavoided.Someoftherisksinclude:
ESDDamage-AlwayshandletheproductinanESDsafeenvironment.EvenifprecautionsaretakenthereisalwaysariskofESD
damage.Thedamagecanremainundetectedandcauseproblemsduringthelifetimeoftheequipment.
Dustcontamination-Openingacameramayexposethelensandsensortodustorpaint.Dustwillaffecttheopticalperformance.
Lensesneedtobedisassembledinadust-freeenvironment,preferablyacleanroom.
Paintoverspray-Maskingthedifferentcomponentsoftheequipmentiscritical.Failuretomasksensitiveareascancauseproblems
withassemblingtheequipment.Anyareasthatarenotpaintedatfactoryorhaveadifferentsurfacetreatmentthantherestofthe
parts(threads,groundandelectricalcontactsurfaces)mustalsobemaskedtoensurefunction.
2
AXISP14andAXISQ19CameraSeries
Repainttheproduct
Repainttheproduct
Preparations
•Ifapplicable,disassemblethedeviceaccordingtotheinstructionsinthisdocument.
•Cleanallpartsthatwillberepaintedthoroughlytoremovegrease,dust,oroil.
•Toensurereassemblyandfunctionalityoftheproduct,maskanyopenings(forexampleforscrews,LEDindicators,
ormicrophones)beforeyoupaint.
•Toavoidunwantedreections,masktheinsideoftheweathershieldbeforeyoupaint.
Pretreatmentofparts
Dependingonthepartmaterialandtypeofpaintappliedatfactory,differentpretreatmentshouldbedoneforthenewpaintto
adhereaswellaspossible.Cleanthepartsproperlytoremoveoil,greaseanddust.
Powdercoatedparts-Useaprimer.Alternatively,removetheoriginalpowdercoatingdowntothebasematerial,usingne
sandpaper,andcleanthepartsbeforepainting.
Anodisedandchromatedparts-Useaprimer.
Uncoatedstainlesssteel-Nospecialpretreatmentisneeded,butmakesurethatthesurfaceiscleanbeforepainting.
Plastic-Useaprimer.
Disassembly
1Backplate
2Bottombasecover
3Cameraunit
4Holder
5Weathershield
6Lid
3
AXISP14andAXISQ19CameraSeries
Repainttheproduct
1.Removethebottombasecover.
2.Removethelidfromthebottombasecover.
3.Removetheweathershield.
4.Removetheholderfromtheweathershield.
7Lockscrew
8Screw
9Armcover
10Pin
5.Removethelockscrew,thescrewsandthearmcover.
6.Removethepin.
4
AXISP14andAXISQ19CameraSeries
Repainttheproduct
Masking
1.Makesureallnecessarypreparationsofthecameraunithasbeenmade.SeePreparationsonpage3.
2.Maskallscrewandscrewholes.
3.Masktheentiretopsurfaceofthebottombasecover.
4.Masktheentirebottomsurfaceofthebottombasecover.
5.Maskthebackofthelid.
6.Masktheundersideoftheweathershield.
7.Masktheholder.
8.Masktheinsideofthearmcover.
9.Maskeverythingbetweenthefootandtheballjoint.
10.Masktheslotsfortheweathershield.
11.Maskthefrontofthecamera.
Repainting
1.Applyathinandevenlayerofspraypaintaccordingtotheinstructionsofthepaintmanufacturer.
2.Letthepaintdry.
3.Togetabettercoverageandclearercolor,applyasecondlayerofspraypaint.
4.Whenthepaintisdry,removethemasking.
5
AXISP14andAXISQ19CameraSeries
Repainttheproduct
Reassembly
1.Placethepinintherecessinthearm.
2.Attachthearmcover,thefourscrewsandthelockscrew.Donottightenthelockscrew.Tightenthefourscrewswith1
Nm(0.7lbft)tighteningtorque.
3.Attachtheweathershield.
4.Reassemblethecamera.Tightenthescrewswith1.2Nm(0.9lbft)tighteningtorque.
6
RepaintingInstructionsVer.M3.2
AXISP14andAXISQ19CameraSeriesDate:July2022
©AxisCommunicationsAB,2021-2022PartNo.T101681 19
/