1. Remove the stock bolt holding the door-net. See Photo 1.
2. Insert the supplied flag nut behind the door-net mounting holes. See Photo 2.
3. Install the cube light mounting bracket using the supplied 5/16-18x1 button head bolts. Tighten using a 3/16” Allen
wrench. See Photo 3. The door net can be reinstalled.
4. Install the cube like using the hardware supplied with the light. See Photo 4.
5. Refer to the instructions that came with the light to wire it to the vehicle.
Photo 1 Photo 2
Photo 3
Remove stock bolt holding door net. Insert supplied flag nut behind mounting holes.
Install cube light mounting bracket.
INSTALLATION INSTRUCTONS
Photo 4
Install cube light using supplied hardware.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all
applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the
buyers responsibility to comply with all Federal, State and Local laws governing the sales of any items
listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country,
LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.