Philips PAxBLE User manual

Brand: Philips

Model: PAxBLE

Type: User manual

Philips PAxBLE is a sleek and compact device that offers smart lighting control for your home or business. With its Bluetooth connectivity, you can easily set up and control your lighting using the Dynalite app on your smartphone or tablet. Create custom lighting scenes, adjust brightness levels, and set schedules to automate your lighting based on your daily routine or preferences. The PAxBLE also features voice control compatibility with Amazon Alexa and Google Assistant, allowing you to control your lights hands-free.

24.5 mm

(0.96 in)

88 mm (3.46 in)

X 2 X 2

52 mm (2.05 in)

60 mm (2.36 in)

63 mm

(2.48 in)

AntumbraLite

Installation Instructions

Instructions d’installation

Installationsanweisungen

Instrucciones de instalación

Istruzioni per l’installazione

Installatie-instructies

インストール手順

安装指示

PAxBLE

Devices must be installed by a

qualied electrician in accordance with

all national and local electrical and

construction codes and regulations.

Les appareils doivent être installés par un

électricien diplômé conformément à tous les

codes et réglementations électriques et de

construction nationaux et locaux.

Die Geräte sind von einem qualizierten Elektriker

in Übereinstimmung mit allen geltenden

Vorschriften zu installieren.

Los dispositivos deben ser instalados por un

electricista calicado y cumpliendo todas las

normas y regulaciones, tanto nacionales como

locales, sobre instalaciones eléctricas y obras.

I dispositivi devono essere installati da un

elettricista qualicato in conformità con le norme

locali e nazionali vigenti in materia di costruzioni

edilizie e installazione di impianti elettrici.

De apparaten moeten worden aangebracht

door een gekwaliceerde elektricien en in

overeenstemming met alle nationale en

plaatselijke elektriciteits- en bouwvoorschriften.

装置を取り付ける際は、資格のある電気技師に依頼し、

国および地域の電気および建設に関するすべての法令に

従ってください。

根据国家/地区及当地的电气与建筑规范和法规，该设

备必须由有资质的电工进行安装。

1 2

IEC Pollution Degree II

50° C (122° F)

-5° C (23° F)

≤

90%

C123456

0.5–1.5 mm

20–16 AWG

0.5–1.5 mm

20–16 AWG

9 mm (0.35 in)

3 4

5 A B

AZZ 514 0922 R07

change without notice. No representation or warranty as to the accuracy or

completeness of the information included herein is given and any liability

for any action in reliance thereon is disclaimed. Philips and the Philips

Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other

trademarks are owned by Signify Holding or their respective owners.

www.dynalite.com

Do not connect inputs to mains.

Refer to Service Guide for full cleaning recommendations.

Installation of a home and building automation and control system shall comply with IEC 60364 (all parts). The temperature limits and current-carrying capacities for the

communication wires specied in IEC 60364-5-52 shall not be exceeded.

C123456

≤24 V @≤10mA/

Switch (SELV/Class 2 (UL))

0.5 Nm

4.4 Lb-in

IEC Overvoltage Category III