Ambient

Monster Ambient Operating instructions

  • Hello! I am your chat assistant. I have analyzed the user manual for the Monster Headset Stand 2MNGH0167B0E2. This document provides instructions for installation and use of the device, which includes features like an RGB LED with touch control, a USB 3.0 hub, and a collapsible headset hanger. I'm ready to answer any questions you may have about the device.
  • How do I change the color mode of the LED?
    How do I turn the LED off?
    What operating systems are compatible?
System requirements: PC or Mac with a free USB port
Windows® 7/8/10 Mac OS X 10.9 or higher and at least
100MB or free hard disk space, USB 1/2/3 Port.
Visit us at:
monstergamingusa.com
2021 © Monster and the M Monster logo are trademarks or
registered trademarks that are used under license of Monster,
Inc. 2021 © All rights reserved. Manufactured, marketed and
distributed by Lifeworks Technology Group LLC. under license.
New York, NY 10018. All other trademarks are property of their
respective owners.
Warranty: Limited Lifetime Warranty
Dimensions: 290mm x 140mm x 90mm
Weight: 280g
Website: monstergamingusa.com Support: 877.543.3540
Made in China - Model: 2MNGH0167B0E2
Installation:
1. Put the stand on a flat clean surface and press down lightly then pull
down the suction lever to secure stand to desk.
2. Connect the 5V/2A DC Adapter to the power input (A)
3. Connect the USB micro-b cable (B) to the the Headset Stand then
connect the other end (C) to the USB cable to your computer USB port
4. Connect any other USB devices (D)
5. To change stand placement pull up the small lever on the back (E)
RGB LED function:
Tap with your finger the touch area located above the Monster M
logo, the LED will flash and change the color mode. Long touch to
turn the LED o. The Ambient Headset Stand has 7 color modes.
USB 3.0 HUB function features:
Compatible with Mac OS / Windows / Chrome OS / Android / Linux
Expansion with 4 USB ports for your computer or laptop.
Compliant to USB 3.0 / USB 2.0 / USB 1.1 specification
4x USB 3.0 Type A, 1x USB 3.0 male cable
Max transfer rate up to 5 Gbps
B
E
D
D
A
The Ambient Headset Stand also features a collapsible headset
hanger to secure your headset or hold two headsets at the same time.
B
C
Installation:
1. Put the stand on a flat clean surface and press down lightly then pull
down the suction lever to secure stand to desk.
2. Connect the 5V/2A DC Adapter to the power input (A)
3. Connect the USB micro-b cable (B) to the the Headset Stand then
connect the other end (C) to the USB cable to your computer USB port
4. Connect any other USB devices (D)
5. To change stand placement pull up the small lever on the back (E)
RGB LED function:
Tap with your finger the touch area located above the Monster M
logo, the LED will flash and change the color mode. Long touch to
turn the LED o. The Ambient Headset Stand has 7 color modes.
USB 3.0 HUB function features:
Compatible with Mac OS / Windows / Chrome OS / Android / Linux
Expansion with 4 USB ports for your computer or laptop.
Compliant to USB 3.0 / USB 2.0 / USB 1.1 specification
4x USB 3.0 Type A, 1x USB 3.0 male cable
Max transfer rate up to 5 Gbps
B
E
D
D
A
The Ambient Headset Stand also features a collapsible headset
hanger to secure your headset or hold two headsets at the same time.
B
C
System requirements: PC or Mac with a free USB port
Windows® 7/8/10 Mac OS X 10.9 or higher and at least
100MB or free hard disk space, USB 1/2/3 Port.
Visit us at:
monstergamingusa.com
2021 © Monster and the M Monster logo are trademarks or
registered trademarks that are used under license of Monster,
Inc. 2021 © All rights reserved. Manufactured, marketed and
distributed by Lifeworks Technology Group LLC. under license.
New York, NY 10018. All other trademarks are property of their
respective owners.
Warranty: Limited Lifetime Warranty
Dimensions: 290mm x 140mm x 90mm
Weight: 280g
Website: monstergamingusa.com Support: 877.543.3540
Made in China - Model: 2MNGH0167B0E2
/