Page is loading ...
INS_CNFEVCNEOC_REV–
2/15/12
PAGE 1
INSTALLATION AND OPERATION MANUAL
CNFEVCNEOC
IN-DOME ETHERNET OVER COAX MODULE
FOR VICON SURVEYOR HD DOME CAMERA
The ComNet
™
CNFEVCNEOC for Vicon Surveyor Dome Cameras supports high-speed
Ethernet transmission over standard 75Ω coaxial cable circuits, at a data rate of 100
Mbps, and transmission distances of up to 305 meters (1000 feet). This in-dome
module is the perfect solution for upgrading an existing coaxial cable plant for use
with Ethernet, when compared to the significant costs and nuisance of installing new
network cabling. The unit is configured to operate in remote mode and is intended
to be paired with a compatible Ethernet over coax extender operating in Master
mode and in 100Mbps mode. True plug-and-play design ensures ease of installation
and operation, and no adjustments are ever required.
Indicating LED are provided for rapidly ascertaining equipment operating status. Figure 2
on Page 2 describes the indicators for each light on the unit.
INS_CNFEVCNEOC_REV–
2/15/12
PAGE 2
FIGURE 1 – CNFEVCNEOC IN-DOME MODULE
INSTALLATION AND OPERATION MANUAL CNFEVCNEOC
TECH SUPPORT: 1.888.678.9427
FIGURE 2 – LED INDICATORS
LINK/ACT
BLINK
Coax data activity
OFF
No Link
COAX (75Ω) CAT5e/6Power
Connector
Power supplied
from camera
FIGURE 3 – POSSIBLE ETHERNET CONFIGURATIONS
Ethernet IEEE 802.3
Network Element
Vicon Dome CameraCompatible Ethernet
over Coax Extender:
MASTER MODE
100MBPS MODE
CNFEVCNMC(M,S)1A
CAT5e/6 with
RJ45 Connections
Internal Dome Camera
Connections
<1000ft Coax Cable
Ethernet IEEE 802.3 Network Element determined by user.
INS_CNFEVCNEOC_REV–
2/15/12
PAGE 3
FIGURE 2 – LED INDICATORS
INSTALLATION AND OPERATION MANUAL CNFEVCNEOC
© 2013 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET
INSTALLATION CONSIDERATIONS
This fiber-optic link is supplied as an in-dome module. Units should be installed in dry locations protected from extremes of temperature and humidity.
CAUTION: Take care not to press on any of the LEDs.
IMPORTANT SAFEGUARDS:
A) Elevated Operating Ambient - Consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature
(Tma) specified by the manufacturer.
B) Reduced Air Flow - Installation of the equipment should be such that the amount of air flow required for safe operation
of the equipment is not compromised.
/