Modular Cooking Range Line
S90 Heavy Duty 2-Burner Gas
Range Wall mounted with C-Board
ITEM #
MODEL #
NAME #
SIS #
AIA #
Short Form Specification
Item No.
APPROVAL:
Electrolux Professional
www.electrolux.com/foodservice
Modular Cooking Range Line
S90 Heavy Duty 2-Burner Gas Range Wall mounted with C-
Board
Modular Cooking Range Line
S90 Heavy Duty 2-Burner Gas Range
Wall mounted with C-Board
584235 (GC1G10D5B)S90 2 OPEN GAS BURNERS
(41,000 BTU), WALL
MOUNTED, CB, 1SIDE
OPERATION
Unit to be Electrolux S90 Heavy Duty one 17,000 BTU (5 kW) and one 24,000
BTU (7 kW) burner gas range. Unit to be installed as wall mounted with
operations from one side. High efficiency burners with continuous power
regulations to high power of 41,000 BTU’s (12 kW). Thermocouples as
standard on burners for added safety. Unit to have raised rear c-board for
against the wall or back to back unit installation. Body of unit entirely in 304
Stainless steel. Pan supports in heavy duty cast iron. Unit shall have heavy
duty 304 Stainless steel internal frame with reinforcement on the top of 3
mm. Extra strength work top in heavy duty 3 mm Stainless steel. “Lastertec”
connection system permits units to be connected to each other creating a
seamless work top.
Main Features
•Unit for wall mounted type installation with operations by
chef from one side only (knobs on one side of the console).
•The one 5 kW and one 7 kW high efficiency burners suit high
performing cooking requirements for the most demanding
customers.
•Large sized pan support in cast iron (stainless steel as
option) with long center fins to allow the use of the largest
down to the smallest pans.
•Flat deep drawn spillage area with removable pan supports,
burner rings and flame ignition parts.
•Heavy duty internal frame in 304 type Stainless steel with
reinforcement on top of 3 mm.
•3 mm top in 304 type Stainless steel.
•“Lasertec connection system” creates seamless work top
when units are connected to each other.
•Raised rear C-Board permits unit to be connected up against
the wall for better hygiene.
•Unit delivered with four 200 mm legs as standard (all round
Stainless steel kick plates as option).
Optional Accessories
•Solid top plate for open burner,
360x360mm
PNC 910718 ❑
•Flexible connection hose 3/4"PNC 910720 ❑
•Pan rest CNS, 430x380mmPNC 910729 ❑
•Lower side panel (300mm) for wall
mounted installation for units 700mm
high, leftside
PNC 911671 ❑
•Lower side panel (300mm) for wall
mounted installation for units 700mm
high, rightside
PNC 911672 ❑
•Portioning shelf, 500mm widthPNC 911851 ❑
•Portioning shelf, 500mm widthPNC 911873 ❑
•Side panel, wall mounted, right (units 400
mm high)
PNC 911956 ❑
•Side panel, wall mounted, left (units 400
mm high)
PNC 911957 ❑