Electrolux 584243 (GC1G20D5B) Datasheet

Category
E-book readers
Type
Datasheet

This manual is also suitable for

Electrolux 584243 (GC1G20D5B) is a heavy-duty 4-burner gas range that is wall-mounted with a C-Board. It has two 17,000 BTU (5 kW) burners and two 24,000 BTU (7 kW) burners, making it perfect for high-volume cooking. The unit is made of 304 stainless steel and has a heavy-duty 3 mm internal frame with reinforcement on the top. It also has a 3 mm top in 304 type stainless steel and a "Lasertec connection system" that creates a seamless worktop when units are connected to each other. The raised rear C-Board permits the unit to be connected up against the wall for better hygiene. The unit comes with four 200 mm legs as standard.

Electrolux 584243 (GC1G20D5B) is a heavy-duty 4-burner gas range that is wall-mounted with a C-Board. It has two 17,000 BTU (5 kW) burners and two 24,000 BTU (7 kW) burners, making it perfect for high-volume cooking. The unit is made of 304 stainless steel and has a heavy-duty 3 mm internal frame with reinforcement on the top. It also has a 3 mm top in 304 type stainless steel and a "Lasertec connection system" that creates a seamless worktop when units are connected to each other. The raised rear C-Board permits the unit to be connected up against the wall for better hygiene. The unit comes with four 200 mm legs as standard.

Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas
Range Wallmounted with C-Board
ITEM #
MODEL #
NAME #
SIS #
AIA #
Short Form Specification
Item No.
APPROVAL:
Electrolux Professional
www.electrolux.com/foodservice
Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range Wallmounted with C-
Board
Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range
Wallmounted with C-Board
584243 (GC1G20D5B)S90 4 OPEN GAS BURNERS
(82,000 BTU), WALL
MOUNTED, CB, 1SIDE
OPERATION
Unit to be Electrolux S90 Heavy Duty two 17,000 BTU (5 kW) and two 24,000
BTU (7 kW) burner gas range. Unit to be installed as wall mounted with
operations from one side. High efficiency burners with continuous power
regulations to high power of 82,000 BTU’s (24 kW). Thermocouples as
standard on burners for added safety. Unit to have raised rear c-board for
against the wall or back to back unit installation. Body of unit entirely in 304
Stainless steel. Pan supports in heavy duty cast iron. Unit shall have heavy
duty 304 Stainless steel internal frame with reinforcement on the top of 3
mm.
Extra strength work top in heavy duty 3 mm Stainless steel.
“Lastertec” connection system permits units to be connected to each other
creating a seamless work top.
Main Features
Unit for wall mounted type installation with operations by
chef from one side only (knobs on one side of the console).
The two 5 kW and two 7 kW high efficiency burners suit high
performing cooking requirements for the most demanding
customers.
Manual gas valves with fixed high and low positions allow
precise control of the flame intensity.
Large sized pan support in cast iron (stainless steel as
option) with long center fins to allow the use of the largest
down to the smallest pans.
Flat deep drawn spillage area with removable pan supports,
burner rings and flame ignition parts.
Heavy duty internal frame in 304 type Stainless steel with
reinforcement on top of 3 mm.
3 mm top in 304 type Stainless steel.
“Lasertec connection system” creates seamless work top
when units are connected to each other.
Raised rear C-Board permits unit to be connected up against
the wall for better hygiene.
Unit delivered with four 200 mm legs as standard (all round
Stainless steel kick plates as option).
Included Accessories
1 of Kit for wall mounted installation for
units 400mm high, 400mm
PNC 911603
4 of Cast-iron pan rest for 3,5-5-7Kw
burner, 430x380mm
PNC 911912
Optional Accessories
Solid top plate for open burner,
360x360mm
PNC 910718
Flexible connection hose 3/4"PNC 910720
Pan rest CNS, 430x380mmPNC 910729
Kit for wall mounted installation for units
700mm high
PNC 911670
Lower side panel (300mm) for wall
mounted installation for units 700mm
high, leftside
PNC 911671
Lower side panel (300mm) for wall
mounted installation for units 700mm
high, rightside
PNC 911672
Portioning shelf, 1000mm widthPNC 911856
Portioning shelf, 1000mm widthPNC 911878
Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas
Range Wallmounted with C-Board
Modular Cooking Range Line
S90 Heavy Duty 4-Burner Gas Range Wallmounted with C-Board
The company reserves the right to make modifications to the products
without prior notice. All information correct at time of printing.
2009.10.24
Front
Top
EQ=Equipotential screw
G=Gas connection
Side
Gas
Gas Power:
584243(AGGWOIGJOO)81816 Btu/hr (24 kW)
Gas Type Option:
Natural Gas;Butane/Propane;
Town Gas on request
Gas Inlet:3/4" NPT
Natural gas - Pressure:7" w.c. (17.4 mbar)
LPG Gas Pressure:11" w.c. (27.7 mbar)
Key Information
Net weight:100 kg
Shipping weight:120 kg
Shipping height:400 mm
Shipping width:1000 mm
Shipping depth:900 mm
Shipping volume:0.66 m³
If appliance is set up or next to or against temperature sensitive
furniture or similar, a safety gap of approximately 150 mm should be
maintained or some form of heat insulation fitted.
  • Page 1 1
  • Page 2 2

Electrolux 584243 (GC1G20D5B) Datasheet

Category
E-book readers
Type
Datasheet
This manual is also suitable for

Electrolux 584243 (GC1G20D5B) is a heavy-duty 4-burner gas range that is wall-mounted with a C-Board. It has two 17,000 BTU (5 kW) burners and two 24,000 BTU (7 kW) burners, making it perfect for high-volume cooking. The unit is made of 304 stainless steel and has a heavy-duty 3 mm internal frame with reinforcement on the top. It also has a 3 mm top in 304 type stainless steel and a "Lasertec connection system" that creates a seamless worktop when units are connected to each other. The raised rear C-Board permits the unit to be connected up against the wall for better hygiene. The unit comes with four 200 mm legs as standard.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents