C
A
B
DETAIL C
SCALE 1 : 3
Connect Coax
Shield Here
Connect Coax
Center Here
Grounding Cable
(Termination is
system dependable)
TX15 Tapping Screw
Fixes Box to Antenna
DETAIL A
SCALE 1 : 2
1:
Assemble the top and middle
antenna sections with 20-25 Nm
recommended torque
2:
Tighten the M4 set
screws (2 pcs) with 1-2Nm
recommended torque.
(Use loctite on the set
screws for extreme
cases - Not supplied)
DETAIL B
SCALE 1 : 2
4:
Tighten the M6 set
screws (2 pcs) with 3-5Nm
recommended torque.
(Use loctite on the set
screws for extreme
cases - Not supplied)
3:
Assemble the middle and bottom
antenna sections with 20-25 Nm
recommended torque
Installation Guide
This is a guide only and does not form any contract or warranty
(Only applicable for type -1 and -2)
AC Antennas A/S
Fabriksparken 40, DK-2600 Glostrup, Denmark
WWW.ACANTENNAS.COM
This drawing and the contents herein are property of AC Antennas A/S and is strictly
confidential. Complete or partly reproduction of this drawing or construction of any of the
parts shown herein is strictly forbidden without prior written authorization by AC Antennas A/S.