Cooper Lighting Landau MFT91MWWFT4 User manual

Cooper Lighting
Brand
Cooper Lighting
Model
Landau MFT91MWWFT4
Type
User manual

This manual is also suitable for

108 STREETWORKS Outdoor Lighting Solutions
Cooper Lighting
NOTE: 1 Refer to technical section for lamp/ballast/voltage compatibility.
HOUSING
Formed aluminum housing.
ANSI wattage/source label.
REFLECTOR
Anodized, specular aluminum
reflector is field-rotatable for
forward or side throw illumination.
GASKETING
High temperature door gasket.
DOOR
Extruded aluminum hinged door
with tempered-glass lens and
captive retaining screws.
BALLAST
Removable ballast assembly with
quick disconnect.
FINISH
Standard polyester powder coat
finish in bronze. For more color
options see optional colors or
consult your Streetworks
represenatitive for more
information.
ORDERING INFORMATION
SAMPLE NUMBER: MFT91MWWFT4
OPTIONS +
ACCESSORIES
(See Below)
LARGE AREA LUMINAIRE
OPTIONS (add as suffix)
1=Single Fused, Internally Mounted (120 or 277V)
2=Double Fused, Internally Mounted (208, 240, or 480V)
4=Photocontrol Receptacle
WH=White
BK=Black
AP=Grey
DP=Dark Platinum
GM=Graphite Metallic
AIR=Arm Included for Round Pole
AIS=Arm Included for Round Pole
L=Lamp Included
HS=House Side Shield
ACCESSORIES (order separately)
OA1016=Photoelectric Control, 105-285-Volt NEMA Type
OA1027=Photoelectric Control, 480-Volt NEMA Type
OA1066=Mast Arm Adapter for Existing 2 3/8" O.D. Horizontal Arm
OA1090=Adjustable Slipfitter for 2 3/8" O.D. Vertical Tenon
OA1149=Polycarbonate Vandal Shield, Field Installed
OA1156=6" Rectangular Arm for Square Pole, .20 EPA
OA1157=12" Rectangular Arm for Square Pole, .50 EPA
OA1158=18" Rectangular Arm for Square Pole, .70 EPA
OA1159=Tenon-mounted Crossarm for Two Units
OA1160=Tenon-mounted Crossarm for Three Units
OA1161=Direct Crossarm Mounting Set
OA1167=6" Rectangular Arm for Round Pole, .20 EPA
OA1168=12" Rectangular Arm for Round Pole, .50 EPA
OA1169=18" Rectangular Arm for Round Pole, .70 EPA
OA1201=Photoelectric Control, 347 Volt NEMA Type
PRODUCT
FAMILY
MFT=Landau
LAMP
WATTAGE
40=400W
91=1000W
LAMP TYPE
1
S=High Pressure Sodium
R=SMH
M=Metal Halide
VOLTAGE
1
2=120V
0=208V
4=240V
7=277V
8=480V
W=Multi-Tap wired 120V
N=Multi-Tap wired 277V
BALLAST
TYPE
1
W=CWA
DISTRIBUTION
FT=Forward Throw
3D=Type III MCO
MFT LANDAU
320-1000W
MH/HPS/SMH
AREA
SHIPPING DATA
Approximate Net Weight:
62 lbs. (28.12 kgs.)
OPTIONS + ACCESSORIES [Must be listed in the order shown and separated by a dash]
STREETWORKS
™
9 7/8"
[251mm]
21 13/16" [554mm]
28 1/8" [714mm]
OPTIONAL COLORS [Standard color is bronze, other finish colors available. Consult your Cooper Lighting representative]
WH
White
BK
Black
AP
Grey
GM
Graphite Metallic
DP
Dark Platinum
STREETWORKS Outdoor Lighting Solutions 109Cooper Lighting
MFT LANDAU AREA
PHOTOMETRICS [Complete IES files available at www.cooperlighting.com]
MOUNTING CONFIGURATIONS
MOUNTING SYSTEMS
Wall Mount
Arm Mount Single
Arm Mount 2 @ 180° Arm Mount 2 @ 90°
Arm Mount 3 @ 120°
(Round Pole Only)
Arm Mount 4 @ 90°Arm Mount 3 @ 90°
DRILLING PATTERN
TYPE “M”
3/4'' [20mm]
dia. hole
(2) 5/8'' [16mm]
dia. holes
4 7/8'' [124mm]
2 7/16'' [124mm]
2 11/16''
[69mm]
OA1090
Slipfitter for tenon
mount 2 3/8" O.D.
OA1156
6" rectangular arm for
square pole
OA1157
12" rectangular arm for
square pole
OA1158
18" rectangular arm for
square pole
OA1159
Tenon-mounted cross-arm
for two units. For 3 1/2" O.D.
tenon.
OA1160
Tenon-mounted cross-arm for three units.
For 3 1/2" O.D. tenon.
ISBD-_-2L
Tenon-mounted cross-arm
for two units. 4", 5", or 6"
square pole top.
ISBD-_-3L
Tenon-mounted cross-arm for three units.
4", 5", or 6" square pole top.
NOTE: OA1156, OA1157, OA1158 or OA1161 must be ordered for each fixture when ordering OA1159, OA1160, ISBD-_-2L or ISBD-_-3L. Other mounting configurations available. Consult factory. 6" arms (OA1156, OA1167) cannot be used to mount multiple
fixtures at 90°.
FOOTCANDLE TABLE
Select mounting height and read across for footcandle values
of each isofootcandle line. Distance in units of mounting
height.
Mounting Footcandles Values for
Height Isofootcandle Lines
ABCDEFG
MFT91M3D.IES
20' 50.0 20.0 10.0 5.00 2.00 1.00 0.50
MFT91MFT.IES
20' 50.0 20.0 10.0 5.00 2.00 1.00 0.50
4
3
2
1
0
1
2
3
4
5 4 3 2 1 0 1 2 3 4 5
A
B
C
D
E
F
4
3
2
1
0
1
2
3
4
5 4 3 2 1 0 1 2 3 4 5
A
B
C
D
E
F
G
MFT91M3D.IES
1000-Watt MH
110,000-Lumen Lamp
Type III MCO
MFT91MFT.IES [Qty. 2]
1000-Watt MH
110,000-Lumen Lamp
Forward Throw
E.P.A. TABLE
SINGLE
DRILL PATTERN [W/Arm where applicable] 2 @ 180° 2 @ 90° 3 @ 90° 3 @ 120° 4 @ 90°
MFT “M” 2.7 5.4 6 8.5 8.5 9.75
NOTE: 1 Assumes 12" arm for 90° and 120° mounting configurations, 6" for all else.
  • Page 1 1
  • Page 2 2

Cooper Lighting Landau MFT91MWWFT4 User manual

Cooper Lighting
Brand
Cooper Lighting
Model
Landau MFT91MWWFT4
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents