Moen S72101 Specification

Type
Specification
WEYMOUTH
Single Handle Single Hole Mount
High Arc Kitchen Faucet
Models: S72101 series with spray
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU
1 OR 2 HOLES: A 1-1/2" (38MM) MIN. DIA. HOLE FOR VALVE
AND A 1-1/4" (32MM) MIN. DIA. HOLE FOR SIDE SPRAY.
S p e c i fi c at i o n s
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
Metal construction with various finishes identified by suffix
Includes matching side spray with Duralock quick connect system
Single hole mounting
Flexible supply lines with 3/8" compression fittings
360˚ rotating spout provides ability to install handle on either side
OPERATION
Single handle lever
Temperature controlled by 100˚ arc of handle travel
FLOW
Spout flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein including NSF 61/9
Meets CalGreen and Georgia SB370 requirements
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 3/13
3-1/2"
(89mm)
5-3/4"
(146mm)
2-3/16"
(56mm)
2-1/2" (63mm)
MAX DECK
THICKNESS
7-1/2"
(191mm)
8-1/4"
(210mm)
10-1/2"
(267mm)
2"
(51mm)
5-3/4"
(146mm)
31-1/2"
(800mm)
2-5/16"
(58mm)
1-1/4" (32mm)
THRU HOLE
1-1/2" (38mm)
THRU HOLE
4-3/4"
(121mm)
3-1/2"
3/4"
  • Page 1 1

Moen S72101 Specification

Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI