Technical Manual
John Deere Gator & Riding
Mower Deluxe Seat Cover
Cushioned cover provides superior protection and comfort
Specifications
Fabric: 600D Polyester 300D Polyester
Color: Black Yellow
Made in China
Size: Part #: Fit:
Medium 92624 back rests up to 15”
Large 92634 back rests up to 18”
• Thick cushioned seat for all day riding comfort
• Large capacity rear zippered cargo pocket
• Two side mesh stuff beverage pockets
• Elastic cord at hem for a custom fit
Technical Features & Advantages
Instructions
Installation
Take your seat cover out of it’s stuff sack. Your seat cover has storage pockets on the back of
the cover. This sides faces back.
Pull the seat cover over the seat back. Then pull the rest of the cover over the seat front.
On newer seats there is a lumbar support feature with an adjustable knob on the side. To
access this knob with your cover on, find the opening on the sides of the cover above the
mesh pockets.
Cleaning and Care
Clean your cover with a soft brush and luke-warm water. DO NOT USE SOAP as it may
remove the protective coatings added by the factory. Dry on air or delicate.
Storage
A handy storage bag is provided to store your cover in. To avoid any possibility of mildew
be sure your cover is completely dry before you store it in the storage bag for a long period.
Three Year Warranty
This cover is factory warranted for workmanship and materials for 3 years after purchase.
92624 07.13.05
Big rear zippered
compartment and
mesh stuff pocket
Allows access to lumbar
adjustment controls
Med Large
Seat Length 16.5” 16.5”
Seat Width 19.0” 19.0”
Seat Back Height 14.5” 17.0”
Seat Side Height 5.0” 5.0”
-
1
