2. Gigabyte
  3. W291-Z00

Gigabyte W291-Z00 User guide

  • I have reviewed the user manual for the Gigabyte W291-Z00 server air duct replacement. This document outlines the procedure for removing and installing the air duct, including the necessary prerequisites and the tools needed. I am prepared to answer your questions about this procedure.
  • What tool is needed to remove the hood?
    How many screws secure the hood?
    What is the first step for removing the air duct?
W291-Z00 Tower Server Air Duct Replacing Manual 2019/04/09 1
W291-Z00 Tower Server Air Duct Replacing Manual
Version 1.1
W291-Z00 Tower Server Air Duct Replacing Manual 2019/04/09 2
Replacing Air Duct
▼ Remove the Air Duct
1. Complete these prerequisites in this order.
Open the front door.
Facing the server. Remove the left side cover.
2. Use a Phillips screwdriver to remove the 3 screws securing the hood.
3. Lift the duct out of the chassis.
W291-Z00 Tower Server Air Duct Replacing Manual 2019/04/09 3
▼ Install the Air Duct
1. Complete these prerequisites in this order.
Insert the VGA (GPGPU) card in the appropriate slot.
Install the VGA (GPGPU) fixing lever.
2. Align with the guide standoff to install the fan duct properly and tighten the 3 screws with a
phillips screwdriver.
/