2. ROOMS TO GO
  3. 83200015

ROOMS TO GO 83200015, BBT5455-Maya-Cream/Walnut-Stool Assembly Instructions

  • Hello! I'm a chat assistant, and I've reviewed the assembly instructions for the BBT5455 Stool. This document provides detailed steps, lists of parts and hardware, and cautions to help you assemble the stool successfully. I'm ready to answer any questions you may have about the assembly process or the contents of this instruction.
  • Should I fully tighten the nuts or bolts right away?
    What should I avoid doing when tightening?
    What tools are needed for assembly?
HARDWARE LIST (BOX : 1)
ITEM DESCRIPTION QTY
1JCBC BOLT M6 x 50mm 4 PCS
2 M6 SPRING WASHER 4 PCS
3WOOD SCREW M4 x 45mm 4 PCS
4WOOD DOWEL M8 x 30mm 5 PCS
5 M4 ALLEN KEY (BALL SHAPE) 1 PC
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Rubber Mallet (not provided).
ASSEMBLY INSTRUCTIONS
MODEL : BBT5455 STOOL 1 OF 2
STEP 1 STEP 2
B
C
4
4
4
B
D
D
C
PART LIST
ITEM DESCRIPTION BOX QTY
A CHAIR 1 1 PC
B BACK RAIL 1 1 PC
C FRONT RAIL 11 PC
D LEG 1 2 PCS
ASSEMBLY INSTRUCTIONS 2 OF 2
STEP 3 STEP 4
STEP 5
5
12
A
3
STEP 6
/