Barco FS33 IR series User guide

Brand: Barco

Model: FS33 IR series

Category: Projectors

Type: User guide

This manual is also suitable for

FS33 IR

Barco FS33 IR series, your newly acquired device, offers state-of-the-art NVG (Night Vision Goggle) simulation with exceptional features. Visualize night-time and limited-visibility scenarios, and simulate true-to-life daytime or pitch-black environments. Handle content through HDMI/DVI/VGA input, with a dedicated IR menu for infrared and visual RGB performance adjustments. Experience smear reduction sequences and customize infrared power to suit your needs.

www.projectiondesign.com

addendum

This addendum contains a decription of the special features

which are different from a standard type projector. Please refer

to the main user guide of the product for important information

about safety precautions and the set-up and use of the projec-

tor. Make sure to read both the standard user guide and this

addendum carefully before you operate the projector.

Dieser Anhang enthält eine Beschreibung der besonderen

Merkmale, die sich von denen eines normalen Projektors

unterscheiden. Für wichtige Informationen in Bezug auf die

Sicherheitsvorkehrungen und den Aufbau und die Benutzung

des Projektors schauen Sie bitte in die Gebrauchsanweisung

für das Produkt. Lesen Sie bitte die Gebrauchsanweisung und

diesen Anhang aufmerksam durch, bevor Sie den Projektor in

Benutzung nehmen.

Le présent addenda présente les caractéristiques particu-

lières qui diffèrent de celles d’un projecteur de série. Pour les

consignes de sécurité importantes et les indications concernant

la conﬁguration et le maniement de l’appareil, reportez-vous

au guide d’utilisation principal. Lisez soigneusement le guide

standard ainsi que cet addenda avant de mette le projecteur

en service.

Esta adenda contiene una descripción de las funciones

especiales que se diferencian de las de un proyector de tipo

estándar. Por favor, remitirse a la guía del usuario principal del

producto, para información importante sobre las precauciones

de seguridad y la conﬁguración y el uso del proyector. Procurar

leer detenidamente tanto la guía del usuario estándar como

esta adenda antes de poner en marcha el proyector.

Il presente allegato illustra le caratteristiche speciali differenti

rispetto a un proiettore standard. Fare riferimento alla Guida

dell’utente principale del prodotto per informazioni importanti

sulle precauzioni di sicurezza, la conﬁgurazione e l’uso del proi-

ettore. Leggere attentamente sia la Guida dell’utente standard

che questo allegato prima di utilizzare il proiettore.

Dette addendumet inneholder en beskrivelse av de egenskap-

ene som avviker fra en standard projektor. Sjekk med produktes

komplette brukerveiledning for viktig informasjon om sikkerhet-

stiltak, oppsett og bruk av projektoren. Les både den komplette

brukerveiledningen og addendumet nøye før projektoren tas i

bruk.

IR PROJECTORS

projectiondesign as

FS33 IR

INTRODUCTION

The FS33 IR is a state of the art NVG (Night Vision Goggle) stimulation LED projector which

include a fourth LED light chip that emits infrared light beyond the range visible to the human

eye. The product is capable of visualizing night-time and limited-visibility scenario simulation

as well as visible day-time or pitch black scenarios from the common display engine in order

to have a true-to-life simulation. The FS33 IR is single channel input and handles the content

through one of the input connectors (HDMI/DVI/VGA). The infrared wavelength is optimized

for the performance of the optics in the projector and the night vision goggles present in the

market today. The projector’s solid-state light source provides a completely constant light

output over time, eliminating the need for recalibration, reducing maintenance and total cost

of ownership to a minimum.

FEATURES

• NVGstimulationbyafourthInfraredLED

• 1920x1080and1920x1200resolution

• DimmabletoextremelowlumensoutputofthevisibleRGBdisplay

• Projectvisibledisplayfordaytimeimages

• Projectinfrareddisplayonly,novisibleimagetotheunaidedhumaneye

• Simultaneousprojectvisibleandinfraredforlimitedvisibilityscenario

• Smearreductionsequence

• Infraredpoweradjustments

MENUS

BrilliantColor

sequences:

There are 5 sequences to choose in the REALCOLOR menu. These displays differently when

it comes to sequence modes for color points versus lumens output.

• Vizsim

• Graphics

• HighBrightness

• Darktime6ms(smearreduction)

• Darktime8ms(smearreduction)

IR menu:

A separate IR menu which works with each BrilliantColor

sequence listed above,

controls the infrared and visual RGB performance.

IR LED enable: Turns infrared LED on/off.

IR LED power: Adjusts the intensity of infrared LED.

RGB LEDs disable: Turns visible RGB LED’s on/off.

Dim mode standard: Dimming options from full to minimum with color processing turned

on so the white point is kept constant throughout the range. Appropriate use for daytime and

evening scenarios.

Dim mode custom: Dimming scheme for limited visibility scenarios, enabling the user to

separately adjust the values of the R, G and B intensity in order to tune in the low light visibility

matching the projected content.

PRODUCT USE

For basic operations, set-up and safety precautions, please refer to the main user

guide included with the product.

The FS33 IR is capable of displaying both daytime images, as well as night vision stimulated

content using the fourth infrared chip in the display engine. By operating and adjusting the

dedicated IR Menu options described in the MENU section, the projector is able to display the

full spectrum of the simulation scenarios (see examples below).

• Daytime scenario:Brightscenarioswithhighlumensoutputwithcrispcolorsshowingall

details.TypicallyfullpowertotheRGBLED’sandnopowertothefourthinfraredLED.

• Evening scenario: Lowilluminatedscenariosatevening/duskwherethepictureisdimmed

byadjustingtheRGBLED’s.Fewerdetailsarevisibletotheunaidedhumaneye

comparedtodaytimescenarios.

• Limited visibility scenario:Nighttimeimage,wherethevisibleRGBLEDisdimmedtovery

lowlumensoutputbyusingthecustomIRmenu.Detailsarebarelyseenwiththehumaneye.

UsingtheinfraredLEDandNVgogglesinadditiongivesfullspectrumNVsimulationmodus.

ForpitchblackscenariosthevisibleRGBLED’sareturnedoff,onlykeepingtheinfraredLED

showingthecontent.

If you start in infrared only mode and do not have your NV-goggles available in terms

of being able to see and navigate the menus: Press 4 times on the LIGHT button on the

keypad and the visible RGB ﬁeld turns on.

COMPATIBILITY

Examples of supported Night Vision-goggles:

(not a complete list, a selection of the most common in the market today)

• Gen1

• Gen2

• Gen2+Russian

• Gen2+

• Gen2SuperGen

• Gen2XD-4

• Gen2XD-4ONYX

• Gen2XD-4AG

• Gen2XD4AGONYX

• Gen2XR5

• Gen2XR5ONYX

• Gen2XR5AG

• Gen2XR5AGONYX

• Gen3Commercial

• Gen3Premium

• Gen3Pinnacle

• Gen4

• Gen4Gated/IIT

typical and may vary. Please visit our website for latest speciﬁcations and product offerings.

601-0242-01

All brands and trade names are the property of their respective owners. Speciﬁcations subject to change without prior notice.

All values are typical and may vary. Please visit our website for latest speciﬁcations and product updates.

change without prior notice. All values are typical and may vary. Please visit our website for latest speciﬁcations and product offerings.

projectiondesign locations

www.projectiondesign.com

601-0240-01

head office

projectiondesign as

Habornveien 53

N-1630 Gamle Fredrikstad,

Norway

ph +47 69 30 45 50 fx +47 69 30 45 80

[email protected]

regional offices

New York - Americas

projectiondesign LLC

295 North Street,

Teterboro, NJ 07608,

USA

ph +1 888 588 1024 fx +1 201 288 1034

[email protected]

Amsterdam - EMEA

De Boelelaan 28

1083 HJ Amsterdam, The Netherlands

ph +31 (0) 203301188 fx +31 (0) 204221962

[email protected]

regional contacts

Panama – Central and South America

ph +507 69 800 555 fx +47 69 30 45 80

[email protected]

Cape Town – Africa, Israel

ph + 27 21 79 00 018 fx +47 69 30 45 80

[email protected]

Beijing - China

ph + 86 0 65 63 75 07 fx + 86 10 65 63 76 46

[email protected]

Mumbai – SAARC Region

ph +91 98 20 61 06 70 fx +47 69 30 45 80

[email protected]

Dubai - UAE and Middle East

ph +9714 (4) 8872525 fx +47 69 30 45 80

[email protected]

Wickfield - UK & Ireland

ph +44 (0)844 8099 577 fx +47 69 30 45 80

[email protected]

Düsseldorf – Germany, Austria, Swtizerland

ph +49 (0) 211 22059 544 fx +49 (0) 211 22059 110

[email protected]

Moscow - Russia & CIS

ph +7 (495) 967 7904 fx +7 (495) 967 7600

[email protected]

Choszczno – Central and Eastern Europe

ph +48 883 388 035 fx +47 69 30 45 80

[email protected]

Sydney - Australia & New Zealand

ph +61 407976181

[email protected]

Singapore - South East Asia

ph +65 9621 7421 fx +47 69 30 45 80

[email protected]

Paris - France

ph +33 153307933 fx +47 69 30 45 80

[email protected]

www.projectiondesign.com

Barco FS33 IR series User guide

Brand: Barco

Model: FS33 IR series

Category: Projectors

Type: User guide

This manual is also suitable for

FS33 IR

Download PDF

report

Barco FS33 IR series User guide

This manual is also suitable for

Barco FS33 IR series User guide

Related papers

Other documents