Barco FS33 IR series is a state-of-the-art NVG (Night Vision Goggle) stimulation LED projector that visualizes night-time and limited-visibility scenarios, as well as visible day-time or pitch-black scenarios. With a fourth infrared LED light chip, it projects infrared light beyond the human eye's range, enabling true-to-life simulations. It features 1920x1080 and 1920x1200 resolutions, smear reduction, and adjustable infrared power, making it suitable for various simulation applications, including military training, law enforcement, and emergency response.
Barco FS33 IR series is a state-of-the-art NVG (Night Vision Goggle) stimulation LED projector that visualizes night-time and limited-visibility scenarios, as well as visible day-time or pitch-black scenarios. With a fourth infrared LED light chip, it projects infrared light beyond the human eye's range, enabling true-to-life simulations. It features 1920x1080 and 1920x1200 resolutions, smear reduction, and adjustable infrared power, making it suitable for various simulation applications, including military training, law enforcement, and emergency response.
addendum
This addendum contains a decription of the special features
which are different from a standard type projector. Please refer
to the main user guide of the product for important information
about safety precautions and the set-up and use of the projec-
tor. Make sure to read both the standard user guide and this
addendum carefully before you operate the projector.
Dieser Anhang enthält eine Beschreibung der besonderen
Merkmale, die sich von denen eines normalen Projektors
unterscheiden. Für wichtige Informationen in Bezug auf die
Sicherheitsvorkehrungen und den Aufbau und die Benutzung
des Projektors schauen Sie bitte in die Gebrauchsanweisung
für das Produkt. Lesen Sie bitte die Gebrauchsanweisung und
diesen Anhang aufmerksam durch, bevor Sie den Projektor in
Benutzung nehmen.
Le présent addenda présente les caractéristiques particu-
lières qui diffèrent de celles d’un projecteur de série. Pour les
consignes de sécurité importantes et les indications concernant
la configuration et le maniement de l’appareil, reportez-vous
au guide d’utilisation principal. Lisez soigneusement le guide
standard ainsi que cet addenda avant de mette le projecteur
en service.
Esta adenda contiene una descripción de las funciones
especiales que se diferencian de las de un proyector de tipo
estándar. Por favor, remitirse a la guía del usuario principal del
producto, para información importante sobre las precauciones
de seguridad y la configuración y el uso del proyector. Procurar
leer detenidamente tanto la guía del usuario estándar como
esta adenda antes de poner en marcha el proyector.
Il presente allegato illustra le caratteristiche speciali differenti
rispetto a un proiettore standard. Fare riferimento alla Guida
dell’utente principale del prodotto per informazioni importanti
sulle precauzioni di sicurezza, la configurazione e l’uso del proi-
ettore. Leggere attentamente sia la Guida dell’utente standard
che questo allegato prima di utilizzare il proiettore.
Dette addendumet inneholder en beskrivelse av de egenskap-
ene som avviker fra en standard projektor. Sjekk med produktes
komplette brukerveiledning for viktig informasjon om sikkerhets-
tiltak, oppsett og bruk av projektoren. Les både den komplette
brukerveiledningen og addendumet nøye før projektoren tas i
bruk.
IR PROJECTORS
www.barco.com
FS33 IR
INTRODUCTION
When referring to the term FS33 in this document,it means that the content is applicable for
following Barco products:
• FS33 IR WUXGA
• FS33 IR WQXGA
The FS33 IR is a state of the art NVG (Night Vision Goggle) stimulation LED projector which
include a fourth LED light chip that emits infrared light beyond the range visible to the human
eye. The product is capable of visualizing night-time and limited-visibility scenario simulation
as well as visible day-time or pitch black scenarios from the common display engine in order
to have a true-to-life simulation. The FS33 IR is single channel input and handles the content
through one of the input connectors (HDMI/DVI/VGA). The infrared wavelength is optimized
for the performance of the optics in the projector and the night vision goggles present in the
market today. The projector’s solid-state light source provides a completely constant light
output over time, eliminating the need for recalibration, reducing maintenance and total cost
of ownership to a minimum.
FEATURES
• NVG stimulation by a fourth Infrared LED
• 1920x1080 and 1920x1200 resolution
• Dimmable to extreme low lumens output of the visible RGB display
• Project visible display for daytime images
• Project infrared display only, no visible image to the unaided human eye
• Simultaneous project visible and infrared for limited visibility scenario
• Smear reduction sequence
• Infrared power adjustments
MENUS
BrilliantColor
TM
sequences:
There are 5 sequences to choose in the REALCOLOR menu. These displays differently when
it comes to sequence modes for color points versus lumens output.
• Vizsim
• Graphics
• HighBrightness
• Darktime 6ms (smear reduction)
• Darktime 8ms (smear reduction)
IR menu:
A separate IR menu which works with each BrilliantColor
TM
sequence listed above,
controls the infrared and visual RGB performance.
IR LED enable: Turns infrared LED on/off.
IR LED power: Adjusts the intensity of infrared LED.
RGB LEDs disable: Turns visible RGB LED’s on/off.
Dim mode standard: Dimming options from full to minimum with color processing turned
on so the white point is kept constant throughout the range. Appropriate use for daytime and
evening scenarios.
Dim mode custom: Dimming scheme for limited visibility scenarios, enabling the user to
separately adjust the values of the R, G and B intensity in order to tune in the low light visibility
matching the projected content.
PRODUCT USE
For basic operations, set-up and safety precautions, please refer to the main user
guide included with the product.
The FS33 IR is capable of displaying both daytime images, as well as night vision stimulated
content using the fourth infrared chip in the display engine. By operating and adjusting the
dedicated IR Menu options described in the MENU section, the projector is able to display the
full spectrum of the simulation scenarios (see examples below).
• Daytime scenario: Bright scenarios with high lumens output with crisp colors showing all
details. Typically full power to the RGB LED’s and no power to the fourth infrared LED.
• Evening scenario: Low illuminated scenarios at evening/dusk where the picture is dimmed
by adjusting the RGB LED’s. Fewer details are visible to the unaided human eye
compared to daytime scenarios.
• Limited visibility scenario: Night time image, where the visible RGB LED is dimmed to very
low lumens output by using the custom IR menu. Details are barely seen with the human eye.
Using the infrared LED and NV goggles in addition gives full spectrum NV simulation modus.
For pitch black scenarios the visible RGB LED’s are turned off, only keeping the infrared LED
showing the content.
If you start in infrared only mode and do not have your NV-goggles available in terms
of being able to see and navigate the menus: Press 4 times on the LIGHT button on the
keypad and the visible RGB field turns on.
COMPATIBILITY
Examples of supported Night Vision-goggles:
(not a complete list, a selection of the most common in the market today)
• Gen 1
• Gen 2
• Gen 2+ Russian
• Gen 2+
• Gen 2 SuperGen
• Gen 2 XD-4
• Gen 2 XD-4 ONYX
• Gen 2 XD-4AG
• Gen 2 XD4AG ONYX
• Gen 2 XR5
• Gen 2 XR5 ONYX
• Gen 2 XR5AG
• Gen 2 XR5AG ONYX
• Gen 3 Commercial
• Gen 3 Premium
• Gen 3 Pinnacle
• Gen 4
• Gen 4 Gated/ IIT
©2010. All brands and trade names are the property of their respective owners. Specifications subject to change without prior notice. All values are
typical and may vary. Please visit our website for latest specifications and product offerings.
All brands and trade names are the property of their respective owners. Specifications subject to change without prior notice.
All values are typical and may vary. Please visit our website for latest specifications and product updates.
© All rights reserved. All brands and trade names are the property of their respective owners. Specifications subject to change without prior notice.
All values are typical and may vary. Please visit our website for latest specifications and product offerings.
601-0314-00
PRODUCTION ADDRESS
Habornveien 53
1653 Gamle Fredrikstad
Norway
Model certification name:
GP3
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Barco FS33 IR series is a state-of-the-art NVG (Night Vision Goggle) stimulation LED projector that visualizes night-time and limited-visibility scenarios, as well as visible day-time or pitch-black scenarios. With a fourth infrared LED light chip, it projects infrared light beyond the human eye's range, enabling true-to-life simulations. It features 1920x1080 and 1920x1200 resolutions, smear reduction, and adjustable infrared power, making it suitable for various simulation applications, including military training, law enforcement, and emergency response.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Projectiondesign FS33 IR User guide
-
-
Barco FS35 IR series User guide
-
-
-
Barco E2-Tri-Combo Owner's manual
-
-
Barco F32 User manual
-
-
Other documents
-
Corsair 5000D User guide
-
AOR AR8200MK3-IR User manual
-
Novus NVG-002LIB User manual
-
LightPro 30 R1 150D Onyx 30 R1 IP67 Deck Light User manual
-
Christie LX120 103-006101-01 Owner's manual
-
HP xp8010 Quick setup guide
-
Evo Fitness XGA User manual
-
-
Curtis ALP6GTN63A000 User guide
-
Dell 1800MP Projector Owner's manual
