CMA Dishmachines CMA-66H Datasheet

CMA Dishmachines
Brand
CMA Dishmachines
Model
CMA-66H
Category
Dishwashers
Type
Datasheet

CMA Dishmachines CMA-66H is a high-temperature conveyor dishwasher with a 66-inch opening. It has a four-stage washing process that includes a built-in pre-wash, dual wash, and final rinse. The CMA-66H can wash up to 205 racks per hour and uses a minimum of .94 gallons of water per rack. It is constructed entirely of stainless steel and meets NSF, UL, and CUL sanitation and construction standards. The CMA-66H is available in two models: CMA-66H R/L (Right to Left) and CMA-66H L/R (Left to Right).

CMA Dishmachines CMA-66H is a high-temperature conveyor dishwasher with a 66-inch opening. It has a four-stage washing process that includes a built-in pre-wash, dual wash, and final rinse. The CMA-66H can wash up to 205 racks per hour and uses a minimum of .94 gallons of water per rack. It is constructed entirely of stainless steel and meets NSF, UL, and CUL sanitation and construction standards. The CMA-66H is available in two models: CMA-66H R/L (Right to Left) and CMA-66H L/R (Left to Right).

CMA Dishmachines 12700 Knott Str
eet Gar
den Gr
ove, CA 92841• 800-854-6417 • 714-898-8781 • Fax: 714-895-2141 • www.cmadishmachines.com
CMA
reserves the right to modify specifications or discontinue models without prior notification.
Printed in the U.S.A. © 2008 CMA, Inc.
High Temperature
66" Conveyor
Dishwasher
CMA-66H
Shown with optional cor-
ner feed table. Available
right or left.
Four-stage wash-
i n g process provides
pre-wash, dual power
wash and final rinse all
in a 66" machine.
Large 19" high opening
accommodates larger
items and utensils.
Easy to remove wash
arms with captive end
caps. Never lose
another end cap again!
Rack saver clutch system
with brass rocker arm
bearing protects the
machine, dishracks and
table from damage.
Single action control
switch with easy to read
temperature gauges and
complete operating
instructions.
FEATURES:
■ Auto re-fill system.
■ 205 racks / 820 covers per hour.
■ Economical to operate. Uses only .94 gallons
of water per cycle.
■ Four-stage washing process provides pre-
wash, dual power wash and final rinse all in a
66" machine.
■ Automatic soil purging system filters wash
water and traps plate debris into an external
tray. Tray can be easily removed for dumping
contents.
■ Brass rocker arm bearing (extends longevity)
newly engineered.
■ All stainless steel construction offers durable
performance and years of trouble free
operation.
■ Upgraded high load power contactors.
■ Built-in chemical resistant industrial 10kW
heater is proven to be more durable than
commercial style heaters.
■ Large 19" high opening accommodates larger
items and utensils.
■ Auto start/stop makes operation safe and
easy.
■ Includes table limit switch and rack saver arm
that protect the machine, dishracks and table
from damage.
■ Two speed settings available for optimum
cleaning performance.
■ Auto Fill.
■ Built-in Poly Pro
TM
scrap accumulator.
Model shown as Left to Right.
Also available as Right to Left.
62
1
/
8
"
45
"
Wall
5
TOP VIEW
O
V
4
16
"
Inside Clearance
Not To Exceed
1
1
/
4
"
R
IGHT SIDE
72
"
19
"*
Door Opening 20
3
/
4
"
54
"
55
"
Leg Adj
Available Models
■ CMA-66H R/L
Right to Left
■ CMA-66H L/R Left to Right
Available Options
■ Corner Feed
T
able Standard
(F
ACT
OR
Y
INSTALLED ONLY)
■ Alternative electrical options
■ Also available at 167 racks/hr
■ Stainless steel dishtables
■ Vent Hood with 4" X 16" Vent and Damper
Control (2 per set)
■ Motor Cover
■ Hatco C-24 Booster Heater (40
°F Rise)
■ Hatco C-45 Booster Heater (70
°
F Rise)
OPERATING CAPACITY
RACKS PER HOUR (NSF RATED) 205 205
CONVEYOR SPEED 5.7 FT./MIN. (174 CM/MIN.)
DRAIN 2" -
(3) WASH PUMP MOTORS HP 11
CONVEYOR MOTOR HP 1/3 1/3
WATER INLET - FILL 3/4" (1.9cm)
WA
TER INLET - FINAL RINSE
1/2" (1.27cm)
DRAIN SIZE 2"
(5.1cm)
FINAL RINSE PRESSURE 20 5psi (1.41 kg/cm
2
)
WASH TANK CAPACITY
PRE-WASH 5.25 GAL (20.0 L)
W
ASH
13.25 GAL
(50.0 L)
TOTAL 18.5 GAL (70 L)
WASH PUMP CAPACITY
EACH 52 GPM (197 LPM)
OPERATING TEMPERATURE
W
ASH 150°F-160°F (68°C-71°C)
FINAL RINSE
180
°
F-195°F (82°C-90.5°C)
WATER CONSUMPTION
PER RACK (FINAL RINSE) .94 GAL (3.6 L)
PER HOUR (FINAL RINSE)
192 GPH (726.8 LPH)
DIMENSIONS
DEPTH 25-1/8" (64cm)
WIDTH 66" (167.64cm)
HEIGHT 55-1/2"-56-1/2" (140.97-143.51cm)
STANDARD TABLE HEIGHT 34" (86cm)
MAX HEIGHT CLEARANCE
FOR DISHES 19" (48cm)
STANDARD DISHRACK 11
DIMENSIONS 19-3/4"X19-3/4" (50X50cm)
ELECTRICAL RATING VOLTS PHASE AMPS
208 1 71
240 1 78
208 3 40
240 3 44
480 3 19
ELECTRIC TANK HEATER 208V/10kW 240V/12.75kW
SPECIFY DIRECTION OF RACK TRAVEL (RIGHT TO LEFT OR LEFT TO RIGHT) WHEN
ORDERING
CMA-66H EXHAUST VENTILATION REQUIREMENTS AT 100% CAPACITY CFM
ENTRANCE END 200 MAX
DISCHARGE END 400 MAX
TOT
AL CFM 600 MAX
SHIPPING WEIGHT
APPROXIMATE 750# (340.2kg)
MODEL CMA-66H USA METRIC
USA METRIC
Specifications:
CMA Dishmachines 12700 Knott Street Garden Grove, CA 92841• 800-854-6417 • 714-898-8781 • Fax: 714-895-2141 • www.cmadishmachines.com
CMA reserves the right to modify specifications or discontinue models without prior notification.
Printed in the U.S.A. © 2008 CMA, Inc.
25-1/8"
5" Min. Wall Clearance
66"
TOP VIEW
83-1/8"
High Temperature
66" Conveyor
Dishwasher
CMA-66H
16
"
Inside Clearance
Not To Exceed
1
1
/
4
"
R
72
"
9-1/2"
9"
FRONT VIEW
33-3/4"
Leg Adj
35"
65"
Leg Adj
66"
8" Splash
Shield
Each End
Optional Vent
Hoods 4"X16"
Clearance For
Conveyor
Rocker Arm Is
7-1/4" From
Tank
2" Drain
9"
6-1/2"
Leg Adj
7-1/2"
Drain
16"
25"
4"
RIGHT VIEW
55-1/2"
Leg
Adj.
56-1/2"
Opening
20-3/4"
75-1/2"
Summary Specifications: Model CMA-66H
The Model CMA-66H high temperature conveyor dishwasher meets NSF
, UL, and CUL
sanitation and construction
standards uti
-
lizing 180
°
F final rinse water
.
The CMA-66H performs four separate washing functions including a built-in pre-wash,
dual wash
and final rinse all in a 66" space. The CMA-66H washes up to 205 racks per hour and uses a minimum .94 gallons
of water per rack while achieving sparkling, clean, dry dishes. Constructed entirely of stainless steel.
31"
24"
W
ater Inlet 3"
Off The T
op
Electrical Hook Up
4-1/2" Off The Top
13"
WARNING: Plumbing connections must be made by a qualified service company who will comply with all available Federal, State, and Local Health,
Plumbing and Safety codes.
71-3/4"
Leg
Adj.
72-3/4"
+
RIGHT TO LEFT
  • Page 1 1
  • Page 2 2

CMA Dishmachines CMA-66H Datasheet

CMA Dishmachines
Brand
CMA Dishmachines
Model
CMA-66H
Category
Dishwashers
Type
Datasheet

CMA Dishmachines CMA-66H is a high-temperature conveyor dishwasher with a 66-inch opening. It has a four-stage washing process that includes a built-in pre-wash, dual wash, and final rinse. The CMA-66H can wash up to 205 racks per hour and uses a minimum of .94 gallons of water per rack. It is constructed entirely of stainless steel and meets NSF, UL, and CUL sanitation and construction standards. The CMA-66H is available in two models: CMA-66H R/L (Right to Left) and CMA-66H L/R (Left to Right).

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents