SEI FA874900TX Assembly Instructions Manual

Type
Assembly Instructions Manual
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
service@seidal.com
www.seidal.com
“CARRINGTON”FAUXSLATE FIREPLACE
FA874900TXIVORY
FA875200TXBLACK
FA875500TXCLASIC MAHOGANY
FA875600TXWHITE
Assembly Instructions
A Quantity
of 17
CAM BOLT
B Quantity
of 16
WOOD DOWEL
C Quantity
of 17
CAM LOCK
D Quantity
of 10
FLAT HEAD LONG SCREW
E Quantity
of 6
SOCKET HEXAGON SCREW
F Quantity
of 6
CAM NUT
G Quantity
of 1
SOCKET HEAD WRENCH
H Quantity
of 3
HINGE
I Quantity
Of 12
FLAT HEAD SCREW
Quantity
of 1
FIREBOX W/SCREEN KIT X1PC
SHIPPED IN A SEPARATE CARTON.
(FAUX) SLATE FP (WITH CONVERTIBLE TOP)
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below. You may receive extra hardware with your unit.
(1) Quantity
of 1
TOP PANEL
(2) Quantity
of 2
SIDE PANEL (L&R)
(3) Quantity
of 2
FRONT PANEL (L&R)
(4) Quantity
of 1
UPPER FRONT PANEL
(5) Quantity
of 1
BELOW FRONT PANEL
(6) Quantity
of 1
FIREBOX SUPPORT
(7) Quantity
of 2
WOOD HOLDER
(8) Quantity
of 1
BOTTOM FRAME
(9) Quantity
of 1
TRIANGLE TOP PANEL
MAXIMUM LOADING NOT TO EXCEED 20LBS
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-633-5096
Do not return product to store, please call
Manufacturer for assistance, questions or
Parts.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
(FAUX) SLATE FP (WITH CONVERTIBLE TOP)
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below. You may receive extra hardware with your unit.
Figure 1
INSERT 4PCS WOOD DOWEL (B) &
4PCS CAM BOLT(A) ONTO
CORRESPONDING HOLE OF LEFT AND
RIGHT FRONT PANEL(3),THEN INSERT
4PCS CAM-LOCKS (C) INTO BIG HOLES
OF UPPER&BELOW FRONT
PANELS(4.5) WITH SLOT FOR
SCREWDRIVER FACING OUTWARD.
ROTATE CAM-LOCKS (C) CLOCKWISE
TO SECURE CAM-BOLTS (A). AS
FIGURE1 SHOWN.
Figure 2
INSERT 4PCS WOOD DOWEL (B) &
6PCS CAM BOLT(A) ONTO
CORRESPONDING HOLE OF LEFT AND
RIGHT FRONT PANEL(3),THEN INSERT
6PCS CAM-LOCKS (C) INTO BIG HOLES
OF LEFT AND RIGTH SIDE PANELS(2)
WITH SLOT FOR SCREWDRIVER
FACING OUTWARD. ROTATE
CAM-LOCKS (C) CLOCKWISE TO
SECURE CAM-BOLTS (A). AS FIGURE2
SHOWN.
Figure 3
INSERT 4PCS WOOD DOWEL(B) AND
6PCS SOCKET HEXAGON SCREW(E) TO
CORRESPONDING HOLES OF BOTOOM
FRAME(8) AND PLACE THE ASSEMBLED
UNIT OF FIGURE 5 ONTO BOTTOM
PANEL UPRIGHTLY. THEN INSERT
CAM-NUT (F) INTO CORRESPONDINIG
HOLES,AND
TIGHTEN (E) WITH SOCKET HEAD
WRENCH (G); AS FIGURE3 SHOWN.
(FAUX) SLATE FP (WITH CONVERTIBLE TOP)
Assembly Instructions
R
A
A
E
Figure 4
INSERT 7PCS CAM BLOT (A) AND 4PCS
WOOD DOWEL (B) INTO PREDRILLED
HOLES OF TOP PANEL(1),AND THEN
INSERT 7PCS CAM-LOCK(C) INTO
BIG HOLES OF SIDE PANEL AND FRONT
PANEL AND UPPER FRONT
PANEL(2.3.4) TO ASSEMBLE TOP
PANEL(1) AND PREASSEMBLED FRAME
TOGETHER.AS FIGURE4 SHOWN.
Figure 5
PUT FIXBOX SUPPORT (6) ONTO
CORRESPONDING FRAME, AND FIX IT
BY 6PCS FLAT HEAD LONG SCREW (D).
Figure 6
USE 3PCS HINGE(H) AND 12PCS FLAT
HEAD SCREW(I) TO ASSEMBLE
TRIANGLE TOP PANEL(1) AND
TRIANGLE TOP PANEL (9) TOGETHER;
AS FIGURE6 SHOWN.
(FAUX) SLATE FP (WITH CONVERTIBLE TOP)
Assembly Instructions
B
Figure 7
INSERT FIREBOX FROM THE BACK OF
FIREPLACE. MAKE SURE FIREBOX IS
PRESSED TIGHTLY AGAINST THE
ASSEMBLED UNIT. ATTACH WOOD
HOLDERS (7) ON THE SIDES OF
FIREBOX. INSERT 4PCS FLAT HEAD
LONG SCREW (D) THROUGH
PREDRILLED HOLES ON WOOD
HOLDER (7) AND TIGHTEN INTO
CORRESPONDING HOLES ON BACK OF
LEFT AND RIGHT FORNT PANELS (2.3).
AS FIGURE 7 SHOWN.
Figure 8
NOW YOU CAN ENJOY IT.
(FAUX) SLATE FP (WITH CONVERTIBLE TOP)
Assembly Instructions
Customer Service 1-800-633-5096
service@seidal.com
600 Freeport Parkway, Suite 200
Coppell, Texas, 75019
Missing or damaged hardware and/or parts will be replaced free of charge. We do not sell parts.
Southern Enterprises Inc. will provide replacement parts for only those items purchased
within the last 9 months. If this product has not been purchased from our retail affiliates
(within 9 months), we are under no obligation to provide parts or replacement merchandise.
Parts will not be available for items arriving fully assembled. Parts will be sent if available from
SEI
Please contact Southern Enterprises at 800-633-5096 or in Dallas (972) 869-0111/ 9am –
4pm Mon-Fri Central time if you have product issues with your purchase. Please ask for a
customer service representative for issues involving damages or replacement parts. Please
ask for a technical assistance representative for any issues with product assembly and product
construction.
Please contact the retailer that you purchased from for returns.
We'd love to hear from you! Email us photos of our products in your home at [email protected]
and we might feature it on our site or use it to model one of our inspirational photos.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
FA874900TX/FA875200TX/FA875500TX/FA875600TX -
Parts Replacement Form
1 / 1

SEI FA874900TX Assembly Instructions Manual

Type
Assembly Instructions Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document