Paxton Switch2 Hands free Quick start guide

Type
Quick start guide

Paxton Switch2 Hands free is a keyless entry system that provides convenient and secure access control for your property. With its advanced features, you can easily manage and monitor who enters your premises.

Key features of Paxton Switch2 Hands free:

  • Keycard packs: The system comes with keycard packs, each containing multiple keycards and shadow cards. These cards are used to enroll users and grant them access to your property.

  • Enrolment process: To set up the system, you'll need to present the enrolment card to the reader. This validates the tokens in the keycard pack and allows you to add or remove users.

Paxton Switch2 Hands free is a keyless entry system that provides convenient and secure access control for your property. With its advanced features, you can easily manage and monitor who enters your premises.

Key features of Paxton Switch2 Hands free:

  • Keycard packs: The system comes with keycard packs, each containing multiple keycards and shadow cards. These cards are used to enroll users and grant them access to your property.

  • Enrolment process: To set up the system, you'll need to present the enrolment card to the reader. This validates the tokens in the keycard pack and allows you to add or remove users.

Ins-30038 Hands free keycard pack for Switch2
Initialising a new system
BEEP!
BEEP!
2 3 4
1.
A
t installation, present this card t
o the
reader to
v
alidate the to
k
ens in this pack
2.
T
o re
-
v
alidate a user to
k
en present this
enrolment card to the reader follow
ed
b
y the
user to
k
en
P
axton Access
FUNCTION CARD
enrolment card
More info:
http://paxton.info/74
1.
A
t installation, present t
his card to the
reader to
v
alidate the to
k
ens in this pack
2.
T
o re
-
v
alidate a user to
k
en present this
enrolment card to the reader followed
b
y the
user to
k
en
P
axton Access
FUNCTION CARD
enrolment card
More info:
http://paxton.info/74
1
1.
A
t installation, present
this card to the
reader to
v
alidate the
to
k
ens in this pack
2.
T
o re
-
v
alidate a use
r
tok
en pres
ent this
enrolment
card to the reader
followed
b
y the
user to
k
en
FUNCTION CARD
enrolment card
1.
A
t installati
on, present this card to the
reader to
v
alidate the to
k
ens in this pack
2.
T
o re
-
v
alidate a user to
k
en present this
enrolment card to
the reader followed
b
y the
user to
k
en
FUNCTION CARD
enrolment card
More info:
http://paxton.info/74
1. Take the enrolment card from the new pack.
2. Present the enrolment card to the reader.
3. The reader beeps and the LED’s light up.
4. ALL USERS ARE NOW VALID. Return enrolment card to pack.
Keycard - give to user
Shadow card - write name of user on this card.
Issuing keycards
Each user has a matching pair of tokens.
DO NOT MIX UP THE PAIRS
The keycards are provided in plastic pouches to keep each keycard
with its associated shadow card. This card wallet is provided to
store the shadow cards once the keycards have been issued.
WARNING: Do not take more than one
keycard and / or shadow card from
the wallet at any one time without rst
having written names on them. The
security and administration of your
system will be seriously compromised if
the unmarked cards become mixed up.
Bar a user
Take the matching shadow card and present it to each
reader on your site. The user keycard is now barred.
A barred keycard can be re-validated by presenting an
active enrolment card followed by the user keycard to
the reader.
If a keycard pack is being added
to a system the enrolment
card from an existing keycard
pack must rst be presented,
followed by the enrolment card
from the new pack.
Adding another
keycard pack to an
existing system.
09/12/2009
To enable the buttons, the keycard must rst be presented to the P
series reader and then used in hands free mode. The keycard stores the
details of this interface and can then activate the door using a button.
It can also be used in normal hands free mode and also in local passive
mode with other standard readers.
Paxton
  • Page 1 1

Paxton Switch2 Hands free Quick start guide

Type
Quick start guide

Paxton Switch2 Hands free is a keyless entry system that provides convenient and secure access control for your property. With its advanced features, you can easily manage and monitor who enters your premises.

Key features of Paxton Switch2 Hands free:

  • Keycard packs: The system comes with keycard packs, each containing multiple keycards and shadow cards. These cards are used to enroll users and grant them access to your property.

  • Enrolment process: To set up the system, you'll need to present the enrolment card to the reader. This validates the tokens in the keycard pack and allows you to add or remove users.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI