Commercial Electric EFG1011-2-NTMG Operating instructions

Brand: Commercial Electric

Model: EFG1011-2-NTMG

Type: Operating instructions

This manual is also suitable for

EFG1011-2-BN

Commercial Electric EFG1011-2-NTMG is a versatile light fixture that combines style and functionality. This 2-light flush mount fixture features a transitional design with a brushed nickel finish and white etched glass shades. It's perfect for adding a touch of elegance to any room in your home, from the kitchen to the bedroom.

With its two 60-watt candelabra base bulbs (not included), the EFG1011-2-NTMG provides ample illumination for your space. The white etched glass shades help to diffuse the light, creating a warm and inviting ambiance.

Installation is easy with the included mounting hardware. Simply attach the mounting bracket to the ceiling electrical box, connect the wires, and secure the fixture in place. The fixture is also ETL listed for safety and quality assurance.

Page 1

INSTRUCTION MANUAL

1LT Interior Flushmount Twin Pack

The Home Depot SKU 867-584 (UPC 6940500300436) (brushed nickel)

The Home Depot SKU 870-333 (UPC 6940500300320) (nutmeg)

Page 2

Thank you for purchasing this Commercial Electric interior flushmount. This

product has been manufactured with the highest standards of safety and

quality.

FEATURES:

1. One-light interior flushmount in brushed nickel finish with frosted glass

(SKU 867-584) or nutmeg finish with tea stained glass (SKU 870-333).

2. This fixture has been engineered to safely use a 75 watt medium base

incandescent light bulb (do not exceed 75 watts) (not included).

3. For energy savings, this fixture has been engineered to safely use a

standard base compact fluorescent light bulb (for equivalent light output,

do not exceed 19 watts) (not included).

QUESTIONS, PROBLEMS, MISSING PARTS:

Before returning to your local The Home Depot, please call our Customer

Service Team at 1-877-527-0313 or visit www.homedepot.com. Please

reference your SKU (867-584 brushed nickel fixture or 870-333 nutmeg

fixture) or UPC (6940500300436 brushed nickel fixture or 6940500300320

nutmeg fixture).

Page 3

CAUTION:

1. Before starting installation of this fixture or removal of a previous fixture,

disconnect the power by turning off the circuit breaker or by removing the

fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY

ELECTRICAL QUESTIONS.

3. If you have any non-electrical questions about this fixture, please contact

our Customer Service Team at 1-877-527-0313 or visit

www.homedepot.com. Please reference your SKU (867-584 brushed

nickel fixture or 870-333 nutmeg fixture) or UPC (6940500300436

brushed nickel fixture or 6940500300320 nutmeg fixture).

4. Keep your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION

(not included):

Light Bulb Safety Goggles Ladder Gloves Wire Strippers

(75 watt maximum)

(or CFL equivalent)

Flathead Screwdriver Phillips Screwdriver Wire Cutters

Page 4

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

1ea Hex Nut (#5) 1ea Nipple (#6) 1ea Shade (#7)

1ea Bottom Cover (#8) 1ea Finial (#9)

ASSEMBLY INSTRUCTIONS:

1. Carefully unpack the fixture. Lay out all parts on a clean surface.

2. Unscrew the Finial (#9) from the Nipple (#6). Screw the Nipple (#6) into

the Bushing (#2). Tighten the Hex Nut (#5) against the Bushing (#2) to

secure the Nipple (#6).

3. Before continuing Assembly, please proceed to the Installation Instructions.

4. Install a 75 watt medium base incandescent light Bulb (#4) (not included)

or an equivalent standard base compact fluorescent light bulb (not included)

in the Socket (#3) in the fixture.

5. Place the Shade (#7) and the Bottom Cover (#8) over the Nipple (#6).

Screw the Finial (#9) onto the Nipple (#6) to secure the Shade (#7) and the

Bottom Cover (#8).

Page is loading ...

Page 6

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):

2ea Speed Wire Clips (#12a, #12b) 2ea Outlet Box Screws (#13) 1ea Mounting Strap (#14)

1ea Ground Screw (#15) 2ea Mounting Screws (#16)

INSTALLATION INSTRUCTIONS:

1. Screw the two Mounting Screws (#16) into the Mounting Strap (#14). Mount the

Mounting Strap (#14) to the Outlet Box (#11) using the two Outlet Box Screws

(#13). [Make sure the heads of the Mounting Screws (#16) are facing outside when

the Mounting Strap (#14) is attached to the Outlet Box (#11).]

2. Wrap the ground wire from the fixture around the Ground Screw (#15) on the

Mounting Strap (#14), and then wrap the ground wire from the Outlet Box (#11)

around the Ground Screw (#15) on the Mounting Strap (#14). Connect the white

wire (neutral wire) from the Outlet Box (#11) to the Speed Wire Clip (#12b) by

inserting the wire into the open end of the Speed Wire Clip (#12b) attached to the

white wire from the fixture. Connect the black wire (live wire) from the Outlet Box

(#11) to the Speed Wire Clip (#12a) by inserting the wire into the open end of the

Speed Wire Clip (#12a) attached to the black wire from the fixture. Position the

wires back inside the Outlet Box (#11). Note: If you have electrical questions,

consult your local electrical code for approved grounding methods.

3. Place the Canopy (#1) over the Outlet Box (#11). Allow the heads of the Mounting

Screws (#16) to come out through the large ends of the keyholes on the Canopy

(#1). Twist the Canopy (#1) clockwise until the heads of the Mounting Screws (#16)

slide into the narrow ends of the keyholes. Tighten the Mounting Screws (#16) to

secure the Canopy (#1).

4. Before completing Installation, please return to Assembly Instruction #4.

5. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn

the light switch on to activate the fixture.

Page is loading ...

Page 8

TROUBLESHOOTING:

PRODUCT MAINTENANCE:

1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean

water, never a solvent) to wipe the glass and surface of the fixture.

2. To clean the inside of the fixture, first disconnect power to the fixture by turning off the

circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly

dampened clean cloth (use clean water, never a solvent) to wipe the inside glass and

interior surface of the fixture.

3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft

cloth to dust or wipe carefully.

LIMITED WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period

of five (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only

to products used in normal use and service. If this product is found to be defective, the manufacturer’s only

obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s

discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications,

alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been

improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product.

This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence,

alteration, or faulty installation, or any other failure not relating to faulty material or workmanship. This

warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is

considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty,

whether express or implied, of fitness for a particular purpose, other than the warranty contained herein.

The manufacturer specifically disclaims any liability and shall not be liable for any consequential or

incidental loss or damage, including but not limited to any labor / expense costs involved in the

replacement or repair of said product.

Problem Possible Cause Corrective Action

1. Light bulb is burned out. 1. Replace light bulb.

2. Power is off. 2. Make sure power supply

is on.

3. Faulty wire connection. 3. Check wiring.

Light bulb will not

illuminate.

4. Faulty switch. 4. Test or replace switch.

Fuse blows or circuit

breaker trips when light

bulb is illuminated.

Crossed wires or power wire

is grounding out.

Check wire connections.

Page is loading ...

Commercial Electric EFG1011-2-NTMG Operating instructions

Brand: Commercial Electric

Model: EFG1011-2-NTMG

Type: Operating instructions

This manual is also suitable for

EFG1011-2-BN

Download PDF

report

in other languages

français: Commercial Electric EFG1011-2-NTMG Mode d'emploi
español: Commercial Electric EFG1011-2-NTMG Instrucciones de operación

Commercial Electric EFG1011-2-NTMG Operating instructions

This manual is also suitable for

Commercial Electric EFG1011-2-NTMG Operating instructions

in other languages

Related papers

Other documents