PRIVATE BRAND UNBRANDED EFG8012A-WH-8PK Operating instructions

Page 1

INSTRUCTION MANUAL

2LT Interior Flushmount Twin Pack

The Home Depot SKU 442-616 (UPC 6940500313566) (white)

The Home Depot SKU 262-063 (UPC 6940500313177) (polished brass)

The Home Depot SKU 701-704 (UPC 6940500310633) (brushed nickel)

The Home Depot SKU 790-545 (UPC 6940500310640) (nutmeg)

Page 2

Thank you for purchasing this Commercial Electric interior flushmount. This

product has been manufactured with the highest standards of safety and

quality.

FEATURES:

1. Two-light interior flushmount in white finish with frosted glass (SKU 442-

616), polished brass finish with frosted glass (SKU 262-063), brushed

nickel finish with frosted glass (SKU 701-704), or nutmeg finish with tea

stained glass (SKU 790-545).

2. This fixture has been engineered to safely use two 60 watt medium base

incandescent light bulbs (do not exceed 60 watts each) (not included).

3. For energy savings, this fixture has been engineered to safely use two

standard base compact fluorescent light bulbs (for equivalent light output,

do not exceed 15 watts each) (not included).

4. This fixture contains Speed Wire Clips, allowing for quick and easy wire

installation. They provide a secure connection, eliminating the need for

wire nuts.

QUESTIONS, PROBLEMS, MISSING PARTS:

Before returning to your local The Home Depot, please call our Customer

Service Team at 1-877-527-0313 or visit www.homedepot.com. Please

reference your SKU (442-616 white fixture, 262-063 polished brass fixture,

701-704 brushed nickel fixture, 790-545 nutmeg fixture) or UPC

(6940500313566 white fixture, 6940500313177 polished brass fixture,

6940500310633 brushed nickel fixture, 6940500310640 nutmeg fixture).

Page 3

CAUTION:

1. Before starting installation of this fixture or removal of a previous fixture,

disconnect the power by turning off the circuit breaker or by removing the

fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY

ELECTRICAL QUESTIONS.

3. If you have any non-electrical questions about this fixture, please contact

our Customer Service Team at 1-877-527-0313 or visit

www.homedepot.com. Please reference your SKU (442-616 white fixture,

262-063 polished brass fixture, 701-704 brushed nickel fixture, 790-545

nutmeg fixture) or UPC (6940500313566 white fixture, 6940500313177

polished brass fixture, 6940500310633 brushed nickel fixture,

6940500310640 nutmeg fixture).

4. Keep your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION

(not included):

2 Light Bulbs Safety Goggles Ladder Gloves Wire Strippers

(60 watt maximum)

(or CFL equivalent)

Flathead Screwdriver Phillips Screwdriver Electrical Tape Wire Cutters

Page 4

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

1ea Hex Nut (#5) 1ea Nipple (#6) 1ea Shade (#7)

1ea Bottom Cover (#8) 1ea Finial (#9)

ASSEMBLY INSTRUCTIONS:

1. Carefully unpack the fixture. Lay out all parts on a clean surface.

2. Unscrew the Finial (#9) from the Nipple (#6). Screw the Nipple (#6) into

the Bushing (#2). Tighten the Hex Nut (#5) against the Bushing (#2) to

secure the Nipple (#6).

3. Before continuing Assembly, please proceed to the Installation Instructions.

4. Install two 60 watt medium base incandescent light Bulbs (#4) (not

included) or two equivalent standard base compact fluorescent light bulbs

(not included) in the Sockets (#3) in the fixture.

5. Place the Shade (#7) and the Bottom Cover (#8) over the Nipple (#6).

Screw the Finial (#9) onto the Nipple (#6) to secure the Shade (#7) and the

Bottom Cover (#8).

Page is loading ...

Page 6

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):

2ea Speed Wire Clips (#11a ,#11b)

2ea Outlet Box Screws (#12) 1ea Mounting Strap (#13)

1ea Ground Screw (#14) 2ea Mounting Screws (#15) 1ea Wire Connector (#16)

INSTALLATION INSTRUCTIONS:

1. Screw the two Mounting Screws (#15) into the Mounting Strap (#13). Mount the

Mounting Strap (#13) to the Outlet Box (#10) using the two Outlet Box Screws

(#12). [Make sure the heads of the Mounting Screws (#15) are facing outside when

the Mounting Strap (#13) is attached to the Outlet Box (#10).]

2. Wrap the ground wire from the fixture around the Ground Screw (#14) on the

Mounting Strap (#13), and then connect the ground wire from the fixture to the

ground wire from the Outlet Box (#10). Cover the connection using the Wire

Connector (#16). Connect the white wire (neutral wire) from the Outlet Box (#10)

to the Speed Wire Clip (#11b) by inserting the wire into the open end of the Speed

Wire Clip (#11b) attached to the white wire from the fixture. Connect the black

wire (live wire) from the Outlet Box (#10) to the Speed Wire Clip (#11a) by

inserting the wire into the open end of the Speed Wire Clip (#11a) attached to the

black wire from the fixture. Wrap the

three

wire connections with electrical tape for

a more secure connection.

Position the wires back inside the Outlet Box (#10).

Note: If

you have electrical questions, consult your local electrical code for approved

grounding methods.

3. Place the Canopy (#1) over the Outlet Box (#10). Allow the heads of the Mounting

Screws (#15) to come out through the large ends of the keyholes on the Canopy

(#1). Twist the Canopy (#1) clockwise until the heads of the Mounting Screws (#15)

slide into the narrow ends of the keyholes. Tighten the Mounting Screws (#15) to

secure the Canopy (#1).

4. Before completing Installation, please return to Assembly Instruction #4.

5. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn

the light switch on to activate the fixture.

Page is loading ...

Page 8

TROUBLESHOOTING:

PRODUCT MAINTENANCE:

1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean

water, never a solvent) to wipe the glass and surface of the fixture.

2. To clean the inside of the fixture, first disconnect power to the fixture by turning off the

circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly

dampened clean cloth (use clean water, never a solvent) to wipe the inside glass and

interior surface of the fixture.

3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft

cloth to dust or wipe carefully.

LIMITED WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period

of five (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only

to products used in normal use and service. If this product is found to be defective, the manufacturer’s only

obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s

discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications,

alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been

improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product.

This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence,

alteration, or faulty installation, or any other failure not relating to faulty material or workmanship. This

warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is

considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty,

whether express or implied, of fitness for a particular purpose, other than the warranty contained herein.

The manufacturer specifically disclaims any liability and shall not be liable for any consequential or

incidental loss or damage, including but not limited to any labor / expense costs involved in the

replacement or repair of said product.

Problem Possible Cause Corrective Action

1. Light bulb is burned out. 1. Replace light bulb.

2. Power is off. 2. Make sure power supply

is on.

3. Faulty wire connection. 3. Check wiring.

Light bulb will not

illuminate.

4. Faulty switch. 4. Test or replace switch.

Fuse blows or circuit

breaker trips when light

bulb is illuminated.

Crossed wires or power wire

is grounding out.

Check wire connections.

Page is loading ...

Page 17

MANUEL D'INSTRUCTIONS

2 Plafonniers d’Intérieur à 2 LM

The Home Depot UGS 442-616 (UPC 6940500313566) (blanc)

The Home Depot UGS 262-063 (UPC 6940500313177) (bronze poli)

The Home Depot UGS 701-704 (UPC 6940500310633) (nickel brossé)

The Home Depot UGS 790-545 (UPC 6940500310640) (muscade)

Page is loading ...

PRIVATE BRAND UNBRANDED EFG8012A-WH-8PK Operating instructions

PRIVATE BRAND UNBRANDED EFG8012A-WH-8PK Operating instructions

in other languages

Related papers

Other documents