Siqura CD820 Series Installation guide

Brand
Siqura
Model
CD820 Series
Category
Camera housings
Type
Installation guide
CD820 Series
Compact Network Fixed Dome Camera
Installation Manual
Note: To ensure proper operation, please read this manual thoroughly before using the
product and retain the information for future reference.
Copyright © 2016 Siqura B.V.
All rights reserved.
CD820
Installation Manual v4 (121508-4)
AIT55
Nothing from this publication may be copied, translated, reproduced, and/or published by
means of printing, photocopying, or by any other means without the prior written permission
of Siqura.
Siqura reserves the right to modify specifications stated in this manual.
Brand names
Any brand names mentioned in this manual are registered trademarks of their respective
owners.
Liability
Siqura accepts no liability for claims from third parties arising from improper use other than
that stated in this manual.
Although considerable care has been taken to ensure a correct and suitably comprehensive
description of all relevant product components, this manual may nonetheless contain errors
and inaccuracies. We invite you to offer your suggestions and comments by email via
[email protected]. Your feedback will help us to further improve our documentation.
How to contact us
If you have any comments or queries concerning any aspect related to the product, do not
hesitate to contact:
Siqura B.V.
Zuidelijk Halfrond 4
2801 DD Gouda
The Netherlands
General : +31 182 592 333
Fax : +31 182 592 123
E-mail : [email protected]
WWW : www.siqura.com
2
Contents
1 About this manual ..................................................................................... 4
2 Safety and compliance .............................................................................. 5
2.1 Safety ................................................................................................ 5
2.2 Cautions ............................................................................................. 7
2.3 Compliance ......................................................................................... 7
3 Product overview ...................................................................................... 8
3.1 Models ............................................................................................... 8
3.2 Package contents ................................................................................. 9
3.3 Dimensions ......................................................................................... 9
3.4 System requirements ........................................................................... 10
3.5 System compatibility ............................................................................ 10
4 Cable connection ....................................................................................... 11
4.1 Camera .............................................................................................. 11
4.2 PoE cable connection ............................................................................ 12
4.2.1 RJ-45 connectors ............................................................................. 12
4.2.2 Ethernet cable connection ................................................................. 12
5 Installation ............................................................................................... 14
5.1 Hard-surface installation ....................................................................... 14
5.2 Connect audio ..................................................................................... 15
Index ...................................................................................................... 16
3
1 About this manual
What this manual covers
This manual describes how to install the CD820, Siqura's compact fixed dome IP camera. For
configuration and operation instructions, refer to the User Manual. For the Technical
Specifications, refer to the CD820 datasheet. Download the latest version of the datasheet
and all related manuals from www.siqura.com.
Who should read this manual
This manual is intended for technicians involved in the installation of CD820 cameras.
What you should already know
To be able to install and connect the CD820 properly, you should have adequate knowledge
and skills in the following fields.
● CCTV systems and components
● Installing electronic devices
● Electrical wiring and low-voltage electrical connections
● Ethernet network technologies and Internet Protocol (IP)
● Windows environments
● Web browsers
● Video, audio, and contact closure transmissions
● Video compression methods
Before you start
We advise you to read and observe all instructions and warnings in this manual before you
continue. Keep this manual with the original bill of sale for future reference and warranty
service. When you unpack your product, check for missing or damaged items. If any item is
missing, or if damage is evident, do not install or operate this product. Contact your supplier
for assistance.
Why specifications may change
At Siqura, we are committed to delivering high-quality products and services. The information
given in this manual was current when published. As we continuously seek to improve our
products and user experience, all features and specifications are subject to change without
notice.
We like to hear from you!
Customer satisfaction is our first priority. We welcome and value your opinion about our
products and services. Should you detect errors or inaccuracies in this manual, we would be
grateful if you would inform us. We invite you to offer your suggestions and comments via
[email protected]. Your feedback helps us to further improve our documentation.
4
2 Safety and compliance
This chapter gives the CD820 safety instructions and compliance information.
In This Chapter
2.1 Safety................................................................................................................... 5
2.2 Cautions................................................................................................................7
2.3 Compliance............................................................................................................7
2.1 Safety
The safety information contained in this section, and on other pages of this manual, must be
observed whenever this unit is operated, serviced, or repaired. Failure to comply with any
precaution, warning, or instruction noted in the manual is in violation of the standards of
design, manufacture, and intended use of the module. Siqura assumes no liability for the
customer's failure to comply with any of these safety requirements.
Trained personnel
Installation, adjustment, maintenance, and repair of this equipment are to be performed by
trained personnel aware of the hazards involved. For correct and safe use of the equipment
and in order to keep the equipment in a safe condition, it is essential that both operating and
servicing personnel follow standard safety procedures in addition to the safety precautions
and warnings specified in this manual, and that this unit be installed in locations accessible to
trained service personnel only.
Safety requirements
The equipment described in this manual has been designed and tested according to the
UL/IEC/EN 60950-1 safety requirements. For compliance information, see the EU
Declaration of Conformity which is available for download at www.siqura.com/support-files.
Warning: If there is any doubt regarding the safety of the equipment, do not put it into
operation.
This might be the case when the equipment shows physical damage or is stressed beyond
tolerable limits (for example, during storage and transportation).
Important: Before opening the equipment, disconnect it from all power sources.
The equipment must be powered by a SELV1 power supply. This is equivalent to a Limited
Power source (LPS, see UL/IEC/EN 60950-1 clause 2.5) or a "NEC Class 2" power supply.
When this module is operated in extremely elevated temperature conditions, it is possible for
internal and external metal surfaces to become extremely hot.
1. SELV: conforming to IEC 60950-1, <60 Vdc output, output voltage galvanically isolated
from mains. All power supplies or power supply cabinets available from Siqura comply with
these SELV requirements.
5
Power source and temperature ratings
Verify that the power source is appropriate before you plug in and operate the unit. Use the
unit under conditions where the temperature remains within the range given in the Technical
Specifications of this product. You can download the CD820 datasheet at www.siqura.com.
EMC
This device has been tested and found to meet the CE regulations relating to EMC and
complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation. These limits
are designed to provide reasonable protection against interference to radio communications in
any installation. The equipment generates, uses, and can radiate radio frequency energy;
improper use or special circumstances may cause interference to other equipment or a
performance decrease due to interference radiated by other equipment. In such cases, the
user will have to take appropriate measures to reduce such interactions between this and
other equipment.
Any interruption of the shielding inside or outside the equipment could make the equipment
more prone to fail EMC requirements.
Non-video signal lines must use appropriate shielded Cat 5 cabling (S-FTP), or at least an
equivalent. Ensure that all electrically connected components are carefully earthed and
protected against surges (high voltage transients caused by switching or lightning).
ESD
Electrostatic discharge (ESD) can damage or destroy electronic components. Proper
precautions should be taken against ESD when opening the equipment.
RoHS statement
Global concerns over the health and environmental risks associated with the
use of certain environmentally-sensitive materials in electronic products have
led the European Union (EU) to enact the Directive on the Restriction of the
use of certain Hazardous Substances (RoHS) (2002/95/EC). Siqura offers
products that comply with the EU’s RoHS Directive. The full version of the
Siqura RoHS statement can be viewed at www.siqura.com.
Product disposal
The unit contains valuable materials which qualify for recycling. In the
interest of protecting the natural environment, properly recycling the unit at
the end of its service life is imperative.
When processing the printed circuit board, dismantling the lithium battery
calls for special attention. This kind of battery, a button cell type, contains so
little lithium, that it will never be classified as reactive hazardous waste. It is
safe for normal disposal, as required for batteries by your local authority.
Safety and compliance
6
2.2 Cautions
Handle the camera carefully
Do not abuse the camera. Avoid bumping and shaking. The camera can be damaged by
improper handling or storage.
Do not disassemble the camera
To prevent electric shock, do not remove screws or covers. There are no user serviceable
parts inside. Consult technical support if a camera is suspected of malfunctioning.
Do not use strong or abrasive detergents to clean the camera
Use a dry cloth to clean the camera when it is dirty. If the dirt is hard to remove, use a mild
detergent and wipe gently. To clean the lens, use lens tissue or a cotton tipped applicator and
ethanol. Do not clean the lens with strong detergents.
Never face the camera towards the sun
Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at
the sun or other extremely bright objects, as this can damage the camera.
2.3 Compliance
The EU Declaration of Conformity for this product is available for download at
www.siqura.com/support-files.
Safety and compliance
7
3 Product overview
This chapter introduces the CD820 and its features.
In This Chapter
3.1 Models.................................................................................................................. 8
3.2 Package contents....................................................................................................9
3.3 Dimensions............................................................................................................9
3.4 System requirements............................................................................................ 10
3.5 System compatibility............................................................................................. 10
3.1 Models
CD820F1 Compact fixed dome IP camera
● Multiple resolutions: 1080p/720p
● 1/2.7” Progressive scan CMOS imager
● 3.6 mm fixed lens
● Quad-stream H.264 and MJPEG video
● ONVIF compliant
● Audio - mic input
● Compact surface mount design
● Ruggedised construction
● 12 Vdc / 802.3af PoE
● IP66 Ingress protection rating
CD820F2 Compact fixed dome IP camera
● Multiple resolutions: 1080p/720p
● 1/2.7” Progressive scan CMOS imager
● Quad-stream H.264 and MJPEG video
● 2.8 mm fixed lens
● ONVIF compliant
● Audio - mic input
● Compact surface mount design
● Ruggedised construction
● 12 Vdc / 802.3af PoE
● IP66 Ingress protection rating
8
3.2 Package contents
CD820 camera Plastic anchors (x3) Self-tapping screws (x3)
Rubber washer (×3) Security TORX Connectors (waterproof
solution)
Quick Start Guide
Note: The supplied self-tapping screws are mainly for softer substrate/material installations
such as wood. For other installation environments such as cement walls, pre-drill the holes
and use plastic anchors before fastening the supplied self-tapping screw to the wall.
3.3 Dimensions
The CD820 dimensions are provided in millimetres in the figures below.
CD820 dimensions in millimetres
Product overview
9
3.4 System requirements
You can get access to the CD820 camera from a standard web browser which supports
ActiveX controls. The browsing PC must meet the system requirements given in the table
below.
Item System requirement
Personal computer Intel Pentium M, 2.16 GHz (or higher) or Intel CoreTM2 Duo,
2.0 GHz (or higher)
At least 2 GB RAM
Operating system Windows 7
Web browser Internet Explorer
Network card 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
Viewer ActiveX control plug-in for Microsoft IE
3.5 System compatibility
To ensure system compatibility, you are advised to download the latest CD820 firmware at
http://www.siqura.com.
Product overview
10
4 Cable connection
Read the instructions provided in this chapter thoroughly before installing the CD820 camera.
In This Chapter
4.1 Camera............................................................................................................... 11
4.2 PoE cable connection............................................................................................. 12
4.1 Camera
Under the CD820 camera's outer cover, installers can physically adjust the angle and lens
settings as well as access the reset button.
Important: The lens is factory focused for a wide depth of field when the housing cover is in
place. The CD820's lens is focused to compensate for the slight shift in focus that is caused
by the clear bubble. In the event that the focus needs to be adjusted, loosen the focus
screw, refocus the lens, verify that the camera is still in focus with the housing cover in
place, and then tighten gently. Do not over tighten!
Overview of the internal configuration of the CD820 camera
Feature Description
1. Reset button Press and hold this button for at least 20 seconds with an
appropriate tool such as a small screwdriver or a paperclip, to
restore the default settings (including network settings).
2. Pan screw Loosen to adjust the pan angle.
3. Focus screw Loosen to adjust the lens focus. Rotate the lens to the left
and/or right to adjust the focus. Please note that under normal
circumstances, the lens is factory focused and should not
require adjusting.
4. Tilt screw Loosen to adjust the tilt angle.
5. microSD card
slot
Insert a micro secure digital (microSD) card for storing
recordings locally
11
4.2 PoE cable connection
The CD820 uses Power over Ethernet (PoE), which requires that IEEE 802.3af PoE equipment
is available on the network. The use of Cat 5 Ethernet cable is recommended for network
connection. For the best transmission quality, limit the cable length to no more than 100
metres.
Connect one end of the Ethernet cable to the camera's RJ-45 connector and the other end of
the cable to the IEEE 802.3af network switch or PC. The CD820 consumes 3.8W of power.
Note: In some cases, you may need to use an Ethernet crossover cable when directly
connecting the CD820 to a PC.
4.2.1 RJ-45 connectors
A waterproof cable and RJ-45 connector are attached to the CD820 camera.
Follow the instructions in this section to complete the IP camera connection.
The CD820's waterproof RJ-45 connection
4.2.2 Ethernet cable connection
To connect the CD820's Ethernet cable.
1 Unpack the CD820 compact fixed-dome IP camera.
2 Use the security TORX tool to remove the housing cover.
Removing the housing cover
1 After connecting the Ethernet cable, replace the dome cover.
Cable connection
12
2 Run the Ethernet cable through the Waterproof RJ-45 Screw-On Plug.
3 Connect one end of the Ethernet cable to the RJ-45 dongle.
4 Completely tighten the sealing nut of the waterproof RJ-45 screw-on plug.
5 Connect the other end of the Ethernet cable to the Power Sourcing Equipment (PSE).
RJ-45 dongle
Note: For proper operation of the camera, use a waterproof PoE switch/hub.
Cable connection
13
5 Installation
The CD820 can be installed directly on a wall or ceiling, provided the surface has sufficient
strength to support the camera.
In This Chapter
5.1 Hard-surface installation........................................................................................ 14
5.2 Connect audio...................................................................................................... 15
5.1 Hard-surface installation
To install the CD820 on a wall or hard ceiling
1 Unpack the CD820 compact fixed-dome IP camera.
2 Use the security TORX tool to remove the housing cover.
Removing the housing cover
3 Insert the rubber washers in both sides of the holes on the bottom plate of the camera.
Rubber washer position
4 Mark the position of the two screw holes.
5 Drill holes that are slightly smaller than the supplied 4 mm screw anchors.
6 Insert the anchors into the drilled holes.
7 Fasten the CD820 to the ceiling or wall with the supplied screws.
8 Connect the Cat 5 Ethernet cable to the RJ-45 connector. If necessary, connect the M8
audio connector to the audio source. For more information, see Connect audio.
9 After the dome body is mounted and the cable connected, type the IP address of the
camera into an Internet Explorer 6.0 or higher web browser to access the camera's
internal settings.
The default user name is Admin with 1234 as the default password.
14
The camera view should appear on the home page. For more information, consult the
CD820 & (I)FD820 Series - User Manual.
10 Use the home page of the camera's web interface to check the position of the camera
view.
11 If necessary, loosen the tilt or pan screws to adjust the camera's angle. See Camera for
more information on the various screws under the camera's cover.
12 Gently tighten the angle screws and replace the dome cover.
CAUTION: MAKE SURE THAT YOU CHANGE THE DEFAULT ADMIN PASSWORD AT THE FIRST
LOGIN. TO KEEP THE ACCOUNT SAFE, CREATE A STRONG, COMPLEX PASSWORD. THIS
HELPS TO PREVENT UNAUTHORISED ACCESS FROM PEOPLE WHO TRY TO USE THE DEFAULT
ACCOUNT.
To create a strong password
● Use at least eight characters
● Do not include your real name, user name, company name, or other personal information
● Do not use complete words that can be found in a dictionary
● Use a random combination of the following letters, numbers, punctuation marks, and
special characters: a-z, A-Z, 0-9, ! # $ % & ‘ - . @ ^ _ ~
5.2 Connect audio
Users can connect an external microphone to the CD820 through a waterproof M8 connector.
The CD820 offers Simplex listen-only audio. This allows audio to be received, so one site can
listen to the other site.
M8 audio connector pin assignments
To enable audio in the CD820
1 Connect the camera's audio connector to an external microphone.
2 In the internal web pages, go to Streaming > Audio to enable the audio feature.
If necessary, refer to the CD820 & (I)FD820 Series - User Manual and follow the
procedure to log on to browser-based interface to view the camera image.
3 Under Transmission Mode, click to select Simplex (Listen only).
4 Click Save.
Installation
15
Index
A
About this manual.................................... 4
C
Cable connection.................................... 11
Camera................................................. 11
Cautions................................................. 7
Compliance............................................. 7
Connect audio........................................ 15
D
Dimensions............................................. 9
E
Ethernet cable connection........................12
H
Hard-surface installation..........................14
I
Installation............................................ 14
M
Models.................................................... 8
P
Package contents..................................... 9
PoE cable connection...............................12
Product overview......................................8
R
RJ-45 connectors....................................12
S
Safety.....................................................5
Safety and compliance.............................. 5
System compatibility...............................10
System requirements.............................. 10
16
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Siqura CD820 Series Installation guide

Brand
Siqura
Model
CD820 Series
Category
Camera housings
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents