TKH SECURITY BLFG01 Installation guide

Type
Installation guide
Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
Platinastraat 65
2718 SZ Zoetermeer
The Netherlands
BLFG01 Front glass for BL2002LPR and BL2002v2LPR
December 7, 2023
Installation Instructions
Page 1
BLFG01 Front glass for
BL2002LPR and
BL2002v2LPR
Installation Instructions
Status:
v1.0
7-Dec-23
Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
Platinastraat 65
2718 SZ Zoetermeer
The Netherlands
BLFG01 Front glass for BL2002LPR and BL2002v2LPR
December 7, 2023
Installation Instructions
Page 2
Revision history
Nr
Date
Remarks
1
07-dec-2023
Version 1.0 initial version
2
Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
Platinastraat 65
2718 SZ Zoetermeer
The Netherlands
BLFG01 Front glass for BL2002LPR and BL2002v2LPR
December 7, 2023
Installation Instructions
Page 3
Copyright © 2023 TKH Security B.V.
All rights reserved.
BLFG01 Front glass for BL2002LPR and BL2002v2LPR Installation Instructions v1.0
Nothing from this publication may be copied, translated, reproduced, and/or published by means of
printing, photocopying, or by any other means without the prior written permission of TKH Security.
TKH Security reserves the right to modify specifications stated in this manual without prior notice.
Brand names
Any brand names mentioned in this manual are registered trademarks of their respective owners.
Liability
TKH Security accepts no liability for claims from third parties arising from improper use other than
that stated in this manual.
Although considerable care has been taken to ensure a correct and suitably comprehensive
description of all relevant product components, this manual may nonetheless contain errors and
inaccuracies. We invite you to offer your suggestions and comments by email. Your feedback will
help us to further improve our documentation.
How to contact us
If you have any comments or queries concerning any aspect related to the product, do not hesitate
to contact:
TKH Security B.V.
Platinastraat 65,
2718 SZ Zoetermeer
The Netherlands
General : +31 20 462 07 00
E-mail : support@tkhsecurity.com
WWW : https://tkhsecurity.com
TKH Security LLC
5340 Spectrum Drive, Suite C
Frederick, Maryland 21703
United States of America
General : +1 301 444 2200
Email : sales.us@tkhsecurity.com
Note: To ensure proper operation, please read this manual thoroughly before using the product
and retain the information for future reference.
Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
Platinastraat 65
2718 SZ Zoetermeer
The Netherlands
BLFG01 Front glass for BL2002LPR and BL2002v2LPR
December 7, 2023
Installation Instructions
Page 4
Table of Contents
1 Replacing Front Glass Instruction .............................................................................. 5
Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
Platinastraat 65
2718 SZ Zoetermeer
The Netherlands
BLFG01 Front glass for BL2002LPR and BL2002v2LPR
December 7, 2023
Installation Instructions
Page 5
1 Replacing Front Glass Instruction
The following instructions explains how to replace the front glass of the Bullet cameras models
BL2002LPR series. The procedure should be performed inside a temperature control environment
with low humidity and dust free to avoid external agents to enter and stay trapped inside the camera
lens compartment where the protective front glass is installed. If external agents enter the
compartment, clean them using a microfiber cloth applying soft pressure to avoid lens scratches.
Please follow these instructions to replace the front glass:
1. Remove the black decorative panel of the camera using a plastic flat tool and applying
outward pressure on the two holes located on the bottom edge of the camera front panel.
Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
Platinastraat 65
2718 SZ Zoetermeer
The Netherlands
BLFG01 Front glass for BL2002LPR and BL2002v2LPR
December 7, 2023
Installation Instructions
Page 6
2. Unscrew the following 4 screws as shown below:
3. Remove the black frame that holds the front glass in position.
4. Remove the old front glass and replace with a new glass.
5. Replace the black frame and its screws to hold the glass and the decorative plastic panel to
properly cover the front of the camera.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

TKH SECURITY BLFG01 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI