General Setup Page
ƔTV Shape:
To set the aspect ratio of the
screen to match the current movie.
Ɣ Angle Mark: To turn on/off the angle
mark. When on, if multi-angle is available
in the current disc. The angle mark will appear
on the screen.
ƔOsd Lang: To set the language of on screen
display.
Ɣ
Screen Saver: To turn ON/OFF the screen
saver. If set to on, when the disc stop playback
couple minutes, the screen saver will appear
on the screen.
Ɣ Last Memory: To turn ON/OFF the last
memory. When set to on, if playback the
currect disc. It will start playback from the
position where the disc was stopped last time.
Speaker Setup Page
Ɣ Downmix
Set the rear audio channels to stereo (hearing
the rear-left channel in Dolby 5.1 disc in left
speaker; rear-right channel in right channel)
or Lt/Rt mode (hearing rear-right and rear-left
channel in both right and left speakers).
Dolby Digital Step
ƔDual Mono:
Select and set the audio channels to play.
ƔDynamic:
Set the dynamic level or turn it off.
Video Setup Page:
Ɣ Picture: Set the picture quality of main unit.
Tv Shape Ps
Angle Mark On
Osd Lang Eng
Screen Saver On
Last Memory On
- - General Setup Page - -
egaP puteS lareneG oT oG
rtS ximnwoD
- -egaP puteS rekaepS - -
egaP puteS rekaepS oT oG
Dual Mono
Dynamic
--puteSlatigiDybloD--
Go To dolby digital setup
Picture
- - Video Setup Page - -
Go To Video Setup Page
Captions Off
10
System Setup
In stop playback, press the SETUP button
the setting menu will
appear on
the screen.
Use Direction buttons and ENTER button to
Ɣ
Captions: To turn on or turn off the captions.
Digital out Raw
Ɣ
Digital out
1.SPDIF OFF: Turn off the digital output
2.RAW:
3.PCM: The output is encoded to PCM format.
The output is in original format of the disc.
Ɣ Video Out: Set the picture quality of the
Video output signal through AV Out jack.
Video Out
acese menu.