Fortis FSEFBTM300A Electric Foldable Treadmill T300 User guide

Fortis
Brand
Fortis
Model
FSEFBTM300A Electric Foldable Treadmill T300
Category
Treadmills
Type
User guide

This manual is also suitable for

ELECTRIC FOLDABLE
TREADMILL T300
FSEFBTM300A
1. Caution
To a v o i d i n j u r y , p l e a s e r e a d t h i s m a n u a l c a r e f u l l y b e f o r e u s e .
• For safety purposes, do not stand on the running belt when starting the unit.
• Please stop immediately if you feel any nausea or the unit’s motion is no longer
smooth.
• Always increase or decrease speed at a slow rate.
• Never adjust the belt during use.
• It is suggested to wear sports shoes when using the machine.
• Children, the elderly, pregnant women should not use the machine.
• Always clip the safety key on your clothing during use.
• Firmly hold the grip bars during use
2. Safety Information
• Place the machine on flat ground. Do not use the machine in the following
locations:
1. Outdoors. (The machine is specially designed for indoor use only).
2. Any ground that is uneven.
3. Any areas in high sunlight or in close proximity to heating units.
• The input for the machine is AC 220V.
• An error may appear if the power is not stable. The unit must not have any other
items connected to the same power socket and should not be used through a
power board.
• It is suggested to wear sports shoes and gym clothes when using the machine.
• Always increase or decrease speed at a slow rate.
• Be careful of children or surrounding objects when folding and unfolding the
machine.
• Never put the machine near wet objects or areas. The unit may produce an error if
it is wet.
SAFETY & WARNINGS
3. Caution during use
• If you do not feel well during exercise, please consult with your doctor.
• No liability will be accepted for improper use of the device and any resulting injuries
or damage.
• Please pull out safety key after use.
• Please pull out the safety key when moving or changing any parts of the machine.
• Children, the elderly, pregnant women should not use the machine.
• Do not place any items within two meters of the machine.
• Do not start the machine when it is folded.
• Ensure water does not come in contact with the machine, especially the motor,
power cable and plug.
• Never wear long dresses or other unsuitable garments during use.
• Do not use the machine in enclosed spaces, locations with uncirculated air or
flammable areas.
• Do not put any objects on the machine.
• Keep the plug away from heat.
• Please switch off the unit and remove the plug after using.
• Please do not stand directly on the belt while starting the machine.
• Do not disassemble or modify this machine in any way.
• Please make sure the running belt is fastened before use.
• The running belt on this treadmill has a visible joint mark. This is completely
normal and will not affect the performance or operation of your treadmill.
Hardware and Tools
1 Main Frame
2 M6x20 Knob
3 M12x20 knob
4 Silicone oil
5 Allen key with screwdriver
6 Safety key
OVERVIEW
Parts List
Serial No
Spec
Qty
1
1PC
2
ABS
1PC
3
ABS
1PC
4
M6x12
1PC
5
Cannot tear
2PCS
6
Q335
1Set
7
Black,2150mm
1PC
8
Red
1PC
9
10
11
M12x70
2PCS
12
M12x20
1PC
13
Nylon
4PCS
14
M5x40
2PCS
15
ABS
2PCS
16
M5
2PCS
17
ABS
1PC
18
1PC
19
Q235
1PC
20
Q235
1PC
21
M8
6PCS
22
Rubber
2PCS
23
Nylon
1PC
24
M6x50
3PCS
25
1PC
26
Nylon
1PC
27
ST4.2x16
6PCS
28
MDF
1PC
29
M8x30
6PCS
30
Drill Texture
1PC
31
PVC
2PCS
32
1PC
33
ST4x12
2PCS
34
140J
1PC
35
Q235
1PC
36
Red
1PC
Fasten the M12 knob and M6 knob in the corresponding positions.
Ensure the safety key placed is place in the middle of console and keep clear free from the
M6 knob.
ASSEMBLY
1. Ensure the safety key is in place and press the "START" key, the machine will start
by counting down for 3 seconds with audible beeps before starting slowly at 1km/h.
2. Press the "+" key to speed up and the "-" key to slow down. The fastest speed is 5
km/h and lowest is 1km/h.
3. Press the “DISPLAY" key to change the display between Distance, Time and
Calories. When "scan" is selected the screen will automatically move between
Distance, Time and Calories every 5 seconds.
4. The treadmill has 3 inbuilt programs. To select a program, ensure that the treadmill
is in standby with the belt stationary. Press the "PROG" button to select the desired
program then press “START” to start the machine.
5. To s t o p t h e u n i t i n a n e m e r g e n c y , p u l l t h e r e d s a f e t y k e y . T h e m a c h i n e w i l l t h e n
stop. When the red safety key magnet is not in place the screen will show “Err”.
When the Red safety key magnet is in place, the display will show “OFF”.
6. Press "STOP" to stop the machine after use.
Auto Mode:
OPERATION
Unfolding
• Pull out the tension knob then carefully lower the running board.
• Secure the treadmill using the fixed knob.
• Connect the treadmill to a power outlet.
• The treadmill is ready for operation.
Fold & Move:
• Tu r n t h e f i x e d k n o b t h e n l i f t t h e r u n n i n g b o a r d t o fold the treadmill.
• Pull out the tension knob, aimed at the platform then release the knob to fix the
treadmill in place.
• The treadmill can be moved and stored safely.
TRANSPORTING
Always disconnect the unit’s power before performing any maintenance or cleaning.
• Clean the belt and dial plate using a slightly damp, clean cloth.
• Check and tighten the screws and spines at fixing point.
• Do not hang clothes or other objects on the machine.
Lubrication
• Pull up the running belt carefully.
• Apply silicone oil to running board.
• Start the machine and let it run for 3 minutes without any weight applied.
• This should be completed after every 30 hours of use and will increase the lifespan
for your unit.
CLEANING & CARE
Adjusting the Belt
1. If the belt is deviating to the left:
• Start the machine and adjust to 2-3km/h without loading, use a hex key to tighten
1/4 of a rotation.
• Let the unit run without loading for 1-2 minutes.
• Repeat this process until the belt is centred.
2. If the belt is deviating to the right:
• Start the machine and adjust to 2-3km/h without loading, use a hex key to tighten
1/4 of a rotation.
• Let the unit run without loading for 1-2 minutes.
• Repeat this process until the belt is centred.
3. Running belt has jammed:
If the running belt is unable to move, use a hex key to tighten 1/2 a rotation on the left and
right until the unit is able to move.
If any error codes appear on the screen, please attempt the following:
ERR
Error without safety key - Please make sure the safety key is
inserted.
ERR
If the safety key is already on, but there ERR still shows or there is
no function, then change the computer screen/display monitor.
E2
Motherboard Error - Contact Kogan.com for support.
E4
Motherboard Error - Contact Kogan.com for support.
E5
Over current protection. Motherboard Error - Contact Kogan.com
for support.
E6
Motor error – Motherboard or motor connection issue - Contact
Kogan.com for support.
E7
Communication interruption – Connection error - Contact
Kogan.com for support.
E8
Overload error - May have exceeded maximum weight.
TROUBLESHOOTING
NOTES
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Fortis FSEFBTM300A Electric Foldable Treadmill T300 User guide

Fortis
Brand
Fortis
Model
FSEFBTM300A Electric Foldable Treadmill T300
Category
Treadmills
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents