Panasonic TX50MX800B Operating instructions

Category
LCD TVs
Type
Operating instructions

This manual is also suitable for

Model No.
Operating Instructions
LED TV
Thank you for purchasing this Panasonic product.
Please read these instructions carefully before operating this product and retain them
for future reference.
Please carefully read the "Safety Precautions" of this manual before use.
The images shown in this manual are for illustrative purposes only.
Please refer to Pan European Guarantee Card if you need to contact your local
Panasonic dealer for assistance.
English
English
72-MX800B-E31Z1
(image: TX-43MX800B)
TX-43MX800B
TX-50MX800B
TX-55MX800B
TX-65MX800B
TX-75MX800B
English
2
Contents
Be Sure to Read
Important Notice ........................................................3
Safety Precautions ....................................................4
Connecting the TV .....................................................8
Initial Setup ................................................................8
Operating the TV .......................................................9
Watching External Inputs .........................................11
Main Screen ........................................................... 12
Using the Menu Functions .......................................12
Using Media Player .................................................14
Additional Information ..............................................15
Troubleshooting .......................................................17
Maintenance ............................................................17
Specifications ..........................................................18
The terms HDMI, HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks
or registered trademarks of HDMI Licensing
Administrator, Inc.
Dolby, Dolby Vision, Dolby Atoms, Dolby Audio,
and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation. Manufactured
under license from Dolby Laboratories.
Confidential unpublished works.
Copyright © 1992-2022 Dolby Laboratories.
All rights reserved.
Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
WPA2TM, WPATM are trademarks of Wi-Fi Alliance®.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Panasonic Entertainment &
Communication Co., Ltd. is under license.
DVB and the DVB logos are trademarks of the DVB
Project.
x.v.ColourTM is a trademark.
DiSEqCTM is a trademark of EUTELSAT.
This product complies with the UHD Alliance Technical
Specification: UHDA Specified Reference Mode,
Version 1.0. FILMMAKER MODETM logo is a trademark
of the UHD Alliance, Inc. in the United States and
other countries.
This mark indicates the product operates on AC
voltage.
This mark indicates a Class II or double insulated
electrical appliance wherein the product does not
require a safety connection to electrical earth (ground).
Transport only in upright position.
Illustrations shown may be different between models
and countries.
The images shown in this manual are for illustrative
purposes only.
Some illustrations are presented as conceptual images
and may be different from the actual products.
Because the Fire TV operating system is periodically
updated, the images, navigation instructions, titles and
location of menu options shown in this manual may be
different from what you see on the screen.
This television is a product of Panasonic, which is not
affiliated with Amazon.com, Inc. or any Amazon affiliate.
You need to be signed in to an Amazon account in
order to use online services.
Certain services are subject to change or withdrawal
at any time, may not be available in all countries, areas
and languages, or in 4K, HDR, UHD, HLG, DOLBY
VISION or DOLBY ATMOS and may require separate
subscriptions.
Certain Alexa Skills and features may not be available
in all countries or languages, and are subject to change
at any time.
Amazon, Fire and all related marks are trademarks
of Amazon.com, Inc. or its affiliates.
English 3
Important Notice
Notice for DVB/Data broadcasting/
IPTV functions
This TV is designed to meet the standards (as of
December, 2020) of DVB-T/T2 (MPEG2, MPEG4-
AVC (H.264) and MPEG HEVC (H.265)) digital
terrestrial services, DVB-C (MPEG2, MPEG4-AVC
(H.264) and MPEG HEVC (H.265)) digital cable
services and DVB-S (MPEG2, MPEG4-AVC (H.264)
and MPEG HEVC (H.265)) digital satellite services.
Consult your local dealer for availability of DVB-T/
T2 or DVB-S services in your area.
Consult your cable service provider for availability of
DVB-C services with this TV.
This TV may not work correctly with the signal
which does not meet the standards of DVB-T/T2,
DVB-C or DVB-S.
Not all the features are available depending on the
country, area, broadcaster, service provider, satellite
and network environment.
Not all CI modules work properly with this TV.
Consult your service provider about the available
CI module.
This TV may not work correctly with CI module that
is not approved by the service provider.
Additional fees may be charged depending on the
service provider.
Compatibility with future services is not guaranteed.
Internet apps, voice control function are provided
by their respective service providers, and may be
changed, interrupted, or discontinued at any time.
Panasonic assumes no responsibility and makes no
warranty for the availability or the continuity of the
services.
Panasonic does not guarantee operation and
performance of peripheral devices made by other
manufacturers; and we disclaim any liability or damage
arising from operation and/or performance from usage
of such other maker's peripheral devices.
Do not touch or be close to the ANTENNA,
SATELLITE IN and HDMI, and prevent
electrostatic dischage to disturb, these terminals
while in USB and LAN operation mode, or it will
cause the TV to stop working or abnormal status.
Handling of customer information
Certain customer information such as IP address
of your device (this TV)'s network interface will be
collected as soon as you connect your Panasonic-
branded smart television (this TV) or other devices to
the internet (excerpted from our privacy policy). We do
this to protect our customers and the integrity of our
Service as well as to protect the rights or property of
Panasonic.
When using Internet connecting function of this
TV, after agreeing (in the jurisdictions where
customer's consent is required to collect personal
information under applicable privacy laws) to or
reviewing Panasonic's terms of service/privacy policy
(hereinafter referred to as terms and conditions etc.),
customer information on the use of this unit may be
collected and used according to terms and conditions
etc.
Panasonic will not be held responsible for collecting
or using customer information via application
provided by third party on this TV or website.
When entering your credit card number, name, etc.,
pay special attention to the trustworthiness of the
provider.
Registered information may be registered in the
server etc. of provider. Before repairing, transferring
or discarding this TV, be sure to erase the
information according to the terms and conditions
etc. of provider.
The recording and playback of content on this or any
other device may require permission from the owner
of the copyright or other such rights in that content.
Panasonic has no authority to and does not grant
you that permission and explicitly disclaims any right,
ability or intention to obtain such permission on your
behalf. It is your responsibility to ensure that your use
of this or any other device complies with applicable
copyright legislation in your country. Please refer to
that legislation for more information on the relevant
laws and regulations involved or contact the owner
of the rights in the content you wish to record or
playback.
This product is licensed under the AVC patent portfolio
license for the personal use of a consumer or other
uses in which it does not receive remuneration to (i)
encode video in compliance with the AVC Standard
("AVC Video") and/or (ii) decode AVC Video that was
encoded by a consumer engaged in a personal activity
and/or was obtained from a video provider licensed to
provide AVC Video. No license is granted or shall be
implied for any other use.
Additional information may be obtained from MPEG
LA, L.L.C.
See http://www.mpegla.com.
Damages
Excepting cases where responsibility is recognised by
local regulations, Panasonic accepts no responsibility
for malfunctions caused by misuse or use of the
product, and other problems or damages caused by
use of this product.
Panasonic accepts no responsibility for the loss, etc.,
of data caused by disasters.
External devices separately prepared by the customer
are not covered by the warranty. Care for the data
stored in such devices is the responsibility of the
customer. Panasonic accepts no responsibility for
abuse of this data.
English
4
Safety Precautions
To help avoid risk of electrical shock, fire, damage or
injury, please follow the warnings and cautions below:
Mains plug and lead
Warning
This TV is designed to operate on AC 220-240 V,
50/60 Hz.
Insert the mains plug fully into the mains socket.
To turn off the apparatus completely, you must pull
the mains plug out of the mains socket.
Consequently, the mains plug should be easily
accessible at all times.
Disconnect the mains plug when cleaning the TV.
Do not touch the mains plug with wet
hands.
Do not damage the mains lead.
Do not place a heavy
object on the lead.
Do not place the lead
near a high temperature
object.
Do not pull on the
lead. Hold onto the
mains plug body when
disconnecting the plug.
Do not move the TV with the lead plugged into a
mains socket.
Do not twist the lead, bend it excessively or
stretch it.
Do not use a damaged mains plug or mains
socket.
Ensure the TV does not crush the mains lead.
If you detect anything unusual,
immediately remove the mains
plug.
Mains plug types vary
between countries.
IMPORTANT:
THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE
FOLLOWING TEXT CAREFULLY.
This TV is supplied with a moulded 3-pin mains plug for
your safety and convenience.
A 13 amp fuse is fitted in this mains plug. Shall the fuse
need to be replaced, please ensure that the
replacement fuse has a 13 amp rating and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the
fuse body.
If the mains plug contains a removable fuse cover, you
must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover, the mains plug must not be
used until a replacement cover is obtained.
A replacement fuse cover may be purchased from your
local dealer.
Do not cut off the mains plug.
Do not use any other type of mains lead except the one
supplied with this TV.
The supplied mains lead and moulded plug are designed
to be used with this TV to avoid interference and for your
safety.
If the mains socket in your home is not suitable, get it
changed by a qualified electrician.
If the plug or mains lead becomes damaged, purchase
a replacement from an authorised dealer.
How to replace the fuse:
For plug type shown in example 1
Lift out the removable fuse cover with a
screwdriver and replace the fuse, then
refit it securely into the mains plug.
For plug type shown in example 2
Lift open the fuse cover in the mains plug
with a screwdriver and replace the fuse,
then press the fuse cover down securely.
Example 1
Example 2
English 5
Take care
Warning
Do not remove covers and never
modify the TV yourself as live
parts are accessible and risk of
electric shock when they are
removed. There are no user
serviceable parts inside.
Do not expose the TV to
rain or excessive moisture.
This TV must not be
exposed to dripping or
splashing water and objects
filled with liquid, such as
vases, must not be placed
on top of or above the TV.
Do not insert foreign objects into the TV through the
air vents.
If the TV is used in an area where insects may
easily enter the TV.
It is possible for insects to enter the TV, such as
small flies, spiders, ants, etc. which may cause
damage to the TV or become trapped in an area
visible on the TV, e.g. within the screen.
If the TV is used in an environment where there is
dust or smoke.
It is possible for dust/smoke particles to enter the
TV through the air vents during normal operation
which can become trapped inside the unit. This may
cause overheating, malfunction, deterioration in
picture quality, etc.
Do not use an unapproved pedestal/mounting
equipment. Be sure to ask your local Panasonic
dealer to perform the setup or installation of
approved wall-hanging brackets.
Do not apply any strong force or impact to the
display panel.
Ensure that children do not climb on the TV.
Do not place the TV
on sloping or unstable
surfaces, and ensure that
the TV does not hang over
the edge of the base.
Warning Stability Hazard
A TV may fall, causing serious personal injury or
death. Many injuries, particularly to children, can
be avoided by taking simple precautions such as:
ALWAYS use cabinets or stands or mounting
methods recommended by the manufacturer of
the TV.
ALWAYS use furniture that can safely support
the TV.
ALWAYS ensure the TV is not overhanging the
edge of the supporting furniture.
ALWAYS educate children about the dangers
of climbing on furniture to reach the TV or its
controls.
ALWAYS route cords and cables connected to
your TV so they cannot be tripped over, pulled
or grabbed.
NEVER place a TV in an unstable location.
NEVER place the TV on tall furniture (for
example, cupboards or bookcases) without
anchoring both the furniture and the TV to a
suitable support.
NEVER place the TV on cloth or other materials
that may be located between the TV and
supporting furniture.
NEVER place items that might tempt children
to climb, such as toys and remote controls, on
the top of the TV or furniture on which the TV
is placed.
If the existing TV is going to be retained and
relocated, the same considerations as above
should be applied.
This TV is designed for table-top use.
Do not expose the TV to
direct sunlight and other
sources of heat.
Suffocation/Choking Hazard
Warning
The packaging of this product may cause
suffocation, and some of the parts are small and
may present a choking hazard to young children.
Keep these parts out of reach of young children.
Pedestal
Warning
Do not disassemble or modify the pedestal.
Caution
Do not use any pedestal other than the one
provided with this TV.
Do not use the pedestal if it becomes warped or
physically damaged. If this occurs, contact your
nearest Panasonic dealer immediately.
During setup, make sure that all screws are
securely tightened.
Ensure that the TV does not suffer any impact
during installation of the pedestal.
Ensure that children do not climb onto the pedestal.
Install or remove the TV from the pedestal with at
least two people.
Install or remove the TV according to the specified
procedure.
To prevent the spread of fire,
keep candles or other open
flames away from this product at
all times
English
6
Radio waves
Warning
Do not use the TV and the remote control in any
medical institutions or locations with medical
equipment. Radio waves may interfere with the
medical equipment and may cause accidents due
to malfunction.
Do not use the TV and the remote control near any
automatic control equipment such as automatic
doors or fire alarms. Radio waves may interfere with
the automatic control equipment and may cause
accidents due to malfunction.
Keep at least 15 cm away from the TV and the
remote control if you have a cardiac pacemaker.
Radio waves may interfere with the operation of the
pacemaker.
Do not disassemble or alter the TV and the remote
control in any way.
Common Interface
Turn the TV off with Mains power On/Off switch
whenever inserting or removing the CI module.
If a smart card and a CI module come as a set, first
insert the CI module, then insert the smart card into
the CI module.
Insert or remove the CI module completely in the
correct direction as shown.
Normally encrypted channels will appear. (Viewable
channels and their features depend on the CI
module.)
If encrypted channels do not appear
[CI card] ([Live TV] menu)
There might be some CI modules in the market
with older firmware versions that do not work fully
interoperable with this new Cl+ v1.4 TV. In this
case, please contact your content provider.
Be sure to remove the CI module card, etc. before
repairing, transferring or discarding.
TV
CI module
Built-in wireless LAN
Caution
Do not use the built-in wireless LAN to connect to
any wireless network (SSID*) for which you do not
have usage rights. Such networks may be listed as
a result of searches. However, using them may be
regarded as illegal access.
* SSID is a name for identifying a particular wireless
network for transmission.
Do not subject the built-in wireless LAN to high
temperatures, direct sunlight or moisture.
Data transmitted and received over radio waves
may be intercepted and monitored.
The built-in wireless LAN uses 2.4 GHz and 5 GHz
frequency bands. To avoid malfunctions or slow
response caused by radio wave interference when
using the built-in wireless LAN, keep the TV away
from other devices that use 2.4 GHz and 5 GHz
signals such as other wireless LAN devices,
microwave ovens, and mobile phones.
When problems occur due to static electricity, etc.,
the TV might stop operating to protect itself. In this
case, turn the TV off at the Mains power On/Off
switch, then turn it back on.
Bluetooth® wireless technology
Caution
The TV and the remote control use the 2.4 GHz
radio frequency ISM band (Bluetooth®). To avoid
malfunctions or slow response caused by radio
wave interference, keep the TV and the remote
control away from the devices such as other
wireless LAN devices, other Bluetooth® devices,
microwaves, mobile phones and the devices that
use 2.4 GHz signal.
Ventilation
Caution
Allow sufficient space (at least 10 cm) around the TV
in order to help prevent excessive heat, which could
lead to early failure of some electronic components.
(cm)
10
1010 10
Ventilation should not be
impeded by covering the
ventilation openings with
items such as newspapers,
tablecloths and curtains.
Whether you are using a pedestal or not, always
ensure the vents at the bottom of the TV are not
blocked and there is sufficient space to enable
adequate ventilation.
Moving the TV
Caution
Before moving the TV, disconnect all cables.
At least two people are required to move the TV to
prevent injury that may be caused by the tipping or
falling of TV.
The remote control signal receiver, etc., are on the
bottom of the TV, so do not apply shocks by allowing it
to hit the floor, etc.
English 7
When not in use for a long time
Caution
This TV will still consume some power even in the Off
mode, as long as the mains plug is still connected to a
live mains socket.
Remove the mains plug from the wall socket when
the TV is not in use for a prolonged period of time.
Excessive volume
Caution
Do not expose your ears to
excessive volume from the
headphones. Irreversible
damage can be caused.
If you hear a drumming noise in your ears, turn
down the volume or temporarily stop using the
headphones.
Battery for the Remote Control
Warning
Keep the batteries out of reach of children to
prevent swallowing.
Adverse physical effects can result if accidentally
swallowed. If you suspect a child has swallowed
one, seek medical attention immediately.
Caution
Incorrect installation may cause battery leakage,
corrosion and explosion.
Replace only with the same or equivalent type.
Do not mix old and new batteries.
Do not mix different battery types (such as alkaline
and manganese batteries).
Do not use rechargeable batteries (Ni-Cd, etc.).
Do not bum or break up batteries.
Do not expose batteries to excessive heat such as
sunshine, fire or the like.
Make sure you dispose of batteries correctly.
Remove the battery from the unit when not using
for a prolonged period of time to prevent battery
leakage, corrosion and explosion.
Transport only in upright position. Transporting the TV
with its display panel facing upwards or downwards
may cause damage to the internal circuitry.
LED TV
(For Great Britain)
UK Declaration of Conformity (DoC)
(For Ireland / Northern Ireland)
EU Declaration of Conformity (DoC)
Ireland, United Kingdom (Northern Ireland)
Hereby, Panasonic Entertainment & Communication
Co., Ltd. declares that this TV is in compliance with
the essential requirements and other relevant
provisions of the Radio Equipment Regulations
2017 No.1206.
If you want to get a copy of the original DoC of this
TV, please visit the following website:
https://www.ptc.panasonic.eu/compliance-documents
Contact in the UK:
Panasonic Testing Centre on behalf of Panasonic
UK, a branch of Panasonic Marketing Europe GmbH
(Importer) Maxis 2, Western Road, Bracknell,
Berkshire, RG12 1RT
Importer for the UK:
Panasonic UK, a branch of Panasonic Marketing
Europe GmbH, Maxis 2, Western Road, Bracknell,
Berkshire, RG12 1RT
5.15 – 5.35 GHz band of wireless LAN is
restricted to indoor operation only in the
United Kingdom.
Hereby, Panasonic Entertainment & Communication
Co., Ltd. declares that this TV is in compliance with
the essential requirements and other relevant
provisions of the Directive 2014/53/EU.
If you want to get a copy of the original DoC of this
TV, please visit the following website:
https://www.ptc.panasonic.eu/compliance-documents
Authorized Representative in EU:
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
Manufacturer:
Panasonic Entertainment & Communication Co., Ltd.
1-10-12 Yagumo-higashi-machi, Moriguchi City,
Osaka 570-0021, Japan
Made in china
5.15 – 5.35 GHz band of wireless LAN is
restricted to indoor operation only in the
following countries.
Maximum radio-frequency power transmitted in the
frequency bands
Type of wireless Frequency band Maximum EIRP
Wireless LAN
2412-2472 MHz 17.4 dBm
5150-5250 MHz 17.7 dBm
5250-5350 MHz 16.8 dBm
5470-5725 MHz 16.8 dBm
Bluetooth®2402-2480 MHz 8 dBm
English
8
Wall mounting the TV (optional)
Please contact your local Panasonic dealer to
purchase the recommended wall-hanging bracket.
(View from the side)
Screw for fixing the TV onto the
wall-hanging bracket (not supplied)
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared
sensor. Otherwise, distortion of image/sound may
occur or operation of other equipment may be
interfered.
Also read the manual of the equipment being
connected.
Connections
Aerial
Keep RF (aerial) cable away from the mains lead to
avoid and minimise mains interference pickup.
Do not place the RF cable under the TV.
terminating plug are required to obtain optimum
quality picture and sound.
If a communal aerial system is used, you may
require the correct connection cable and plug
between the wall aerial socket and the TV.
Your local Television Service Centre or dealer may
be able to assist you in obtaining the correct aerial
system for your particular area and the accessories
required.
Any matters regarding aerial installation, upgrading
of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the
customer.
If the aerial is placed in the wrong location,
interference might happen.
To enjoy the sound from the external equipment
in multi-channel sound (e.g. Dolby Digital 5.1ch),
connect the equipment to the amplifier. For the
connections, read the manuals of the equipment
and amplifier.
Speaker system
Connecting the TV
Please ensure the TV is disconnected from the
mains socket/power point before attaching or
disconnecting any RF/AV leads.
External equipment and cables are for illustrative
purposes only and not supplied with this TV.
Check the type of terminals and cable plugs are
correct when connecting.
When using an HDMI cable, use the fully wired one.
Depth of
screw
a
b
Holes for wall-hanging bracket installation
Model a b
Screw specification
Model Type
Depth of screw
Minimum Maximum
Warning
When optional accessories such as wall brackets
etc. are used, always read and follow the
manufacturer installation and usage instructions.
Do not mount the unit directly below ceiling lights
(such as spotlights or halogen lights) which typically
give off high heat. Doing so may warp or damage
plastic cabinet parts.
When installing wall brackets you must ensure
the wall bracket is not electrically grounded to
metal wall studs. Always ensure that there are no
electrical cables, pipes etc. in the wall before you
begin the wall bracket installation.
To prevent fall and injury, remove the TV from its
fixed wall position when it is no longer in use.
43-inch 200 mm 200 mm
50-inch 200 mm 200 mm
55-inch 400 mm 300 mm
43-inch M6 10 mm 12 mm
50-inch M6 12 mm 15 mm
55-inch M6 12 mm 15 mm
65-inch 400 mm 300 mm
75-inch 400 mm 300 mm
65-inch M6 12 mm 15 mm
75-inch M6 12 mm 15 mm
RF cable
Aerial
ANT
Initial Setup
Plug the mains plug into the socket
outlet and turn on the TV.
It may take a few seconds before the screen is
displayed.
English 9
Amplifier
Use HDMI4 to connect the TV to an amplifier which
has eARC/ARC(Audio Return Channel) function.
If connecting to an amplifier without eARC/ARC
function, use DIGITAL AUDIO OUT.
Fire TV - Initial Setup
When you turn on the TV for the first time, a setup wizard
will guide you through the first steps:
Step 1:Choose Your Location.
Select your country of residence from the list.
Step 2:Choose Your Language.
Select your preferred language for the menu.
Step 3: Select TV mode
In the following step of the initial setup, you can set the
TV’s operation mode. Store Use option will configure
your TV’s settings for store environment, and is not
intended for private use. It is recommended to select
Continue for home use.
Step 4: Pair Your Remote with your TV
Note: If your remote does pair with your TV automatically
or if you have paired your remote with your TV once
previously, this step will be skipped. If this is not the case,
a search for your remote will be performed. Follow the
on-screen instructions to pair your remote control
(depends on the model of the remote control).
Step 5: Enable Network
If you did connect your TV to internet via an
Ethernet cable before the initial setup begins this
step will be skipped. If you didn’t, your TV will search
and list available wireless networks at this point.
Select your network and press Select to connect to it.
Press Fast Forward button on your remote to skip.
After the internet connection is established, the TV will
check for the software updates and download the
latest software next, if any available. Please notice
that this will take some time.
Step 6: Sign In with Your Amazon Account
You can sign in to your Amazon account on the
next screen. You need to be signed in to an Amazon
account in order to use online services. This step will
be skipped if no internet connection has been
established in the previous step. If you don’t already
have an Amazon account you can set up an account
by choosing ‘New to Amazon? Create a free account’
option.
Note: As software updates, specific feature options are
subject to change. Please refer to the actual product,
this user instruction is for reference only.
If there is no network connection, then you can press the
Fast Forward button to skip this step. A dialogue will be
displayed for confirmation. Highlight Do this later and
press Select to continue.
If you skip this step some of the following steps may
differ or be skipped as well.
Once the account has been registered, you will be
asked whether you want to sign-in with the account you
just created. You can choose to change the account and
read the terms and conditions, which will be accepted if
you continue, at this point. Highlight the symbol with three
dots next to the text at the bottom of the screen and press
Select to read and learn more about the related subject.
Highlight Continue and press Select button to proceed
without changing the account.
If you have connected your TV to Internet via a
WLAN network a dialogue will be displayed at this
point, asking if you want to save your WLAN password
to Amazon. Highlight Yes and press Select to confirm
and proceed. Select No to proceed without confirmation.
Note:If you want to connect to the Internet, you must log
in to your Amazon account, and if you choose to
skip the account login, the network will be
disconnected.
Step 7: Parental Controls
You can enable Parental Controls at this point
or you can do it later. Note that if you choose No
Parental Controls, purchasing and video playback
without PIN will be allowed. If you choose Enable
Parental Controls option, you will be asked to enter
or create a new PIN next.
This is the Prime Video PIN that is related to your
Amazon account. If you do not have a Prime Video
PIN and need to create a new one, use the buttons
on your remote as shown on the screen to enter the
PIN twice for confirmation.
You will have to enter it to access some menus,
services, content, etc. protected by this PIN.
Press Select to continue.
You can review or change the parental control settings
later using the Parental Controls option in the
Settings >Preferences menu.
If you have forgotten your PIN follow the link shown on
the screen to reset your PIN.
Step 8: Scan for TV channels
You will be asked whether you want to scan for
channels in the next step. Highlight Yes and press
Select button to start the scan process.
Highlight No and press Select button to scan later.
Before the scan starts, you will be asked to check if
your antenna cable is plugged properly into the
antenna socket on your TV. Press Select to proceed.
1 (On/Off button) Turns the TV on or off
2 Open the Prime Video homepage
3 Open your Apps & Channels
4 Performs multiple operations which correspond to
the operation guide displayed on the menu screen
5 Voice Button: Activates the microphone on the remote
(Available only when the network connection is
normal.)
6 Launch a pre-assigned app
7 Confirms your selection
8 Exit the menu and return to the previous menu
9 Goes to the smart TV homepage
10 To mute and un-mute the sound
11 Increases or decreases the volume
12 Select the digital key number
13 To enter the channel list
14 Open INPUT selection
15 Open picture selection
PICTURE-enables customer to choose VIEWING
modes using PICTURE/UP/DOWN/OK
16 Open the Netflix homepage
17 Open the Freeview Play homepage
18 Displays the electronic program guide
19 (up, down, left and right direction buttons)
Highlights different items in the menu system and
adjusts the menu controls
20 To open the setting options
21 To fast backward/play/fast forward/pause
22 To show the related information
23 Channel up/down
24 To show the subtitles
25 Tune to the last viewed channel
English
10
Remote Control Functions
Most of your television's functions are available via the
menus that appear on the screen.
The remote control supplied with your set can be used to
navigate through the menus and to configure all the
general settings.
How to Pair Remote Control with the TV
If you want to unpair the Bluetooth remote, follow these
steps:
This is a Bluetooth remote control, and before using it,
please pair it with the TV firstly. When TV is turned on
for the first time, a pairing process for your remote will
be performed during the initial setup. Your remote control
should automatically pair with your TV at this point.
Step 1: Press button to enter the home page.
Step 2:
Step 3:
Step 4:
to enter.
Contrllers &
Bluetooth Devices, and press OK to enter.
Voice Remotes
with Alexa, and press OK to enter.
NOTE: Under this menu, you can choose voice remote
with Alexa or Add a new Remote.
Follow the on screen instructions to pair it.(Press and
hold for 10 seconds on the “new” remote. Once it is
discovered, it will appear in the list. And then press OK
on your “old” remote to confirm adding this new remote).
NOTE: If you experience difficulties in pairing your
remote with your TV you can turn off other wireless
devices and try again.
Step 1: Press button to enter the home page.
Step 2: Press
Step 3: Press
to enter.
Contrllers &
Bluetooth Devices, and press OK to enter.
Step 4: Press Voice Remotes
with Alexa, and press OK to enter.
Step 6: Press button to unpair and then choose OK
Step 5: Press to select Remotes or accessories and
other to choose the Bluetooth remote name to enter next
steps.
button. (Operate on the other Bluetooth remote )
Operating the TV
Using the remote control
1
18
19
20
21
22
23
24
25
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
You can add an additional Voice Remote with Alexa to
your TV, or you may also need to replace one if your
old one broke. Other Bluetooth devices like speakers,
games controllers can also be connected via Bluetooth.
The following steps are for your reference:
Step 1:Choose Your Location.
Select your country of residence from the list.
Step 2:Choose Your Language.
Select your preferred language for the menu.
Step 3: Select TV mode
In the following step of the initial setup, you can set the
TV’s operation mode. Store Use option will configure
your TV’s settings for store environment, and is not
intended for private use. It is recommended to select
Continue for home use.
Step 4: Pair Your Remote with your TV
Note: If your remote does pair with your TV automatically
or if you have paired your remote with your TV once
previously, this step will be skipped. If this is not the case,
a search for your remote will be performed. Follow the
on-screen instructions to pair your remote control
(depends on the model of the remote control).
Step 5: Enable Network
If you did connect your TV to internet via an
Ethernet cable before the initial setup begins this
step will be skipped. If you didn’t, your TV will search
and list available wireless networks at this point.
Select your network and press Select to connect to it.
Press Fast Forward button on your remote to skip.
After the internet connection is established, the TV will
check for the software updates and download the
latest software next, if any available. Please notice
that this will take some time.
Step 6: Sign In with Your Amazon Account
You can sign in to your Amazon account on the
next screen. You need to be signed in to an Amazon
account in order to use online services. This step will
be skipped if no internet connection has been
established in the previous step. If you don’t already
have an Amazon account you can set up an account
by choosing ‘New to Amazon? Create a free account’
option.
Using the TV controls
English 11
Watching External
Inputs
Display the [Input] menu, then select the input
of the connected equipment.
Note
If the external equipment has an aspect adjustment
function, set it to "16:9".
3 Power LED
2 Remote control signal receiver
White: Standby
1 Power On /Control Button
OK
Select
This button allows you to control the Inputs / Volume
Up-Down / Channel Up-Down / Powe Off of the TV.
NOTE: The position of the control button may differ
depending on the model.
Operating with the Control Button
Press the Control Button to display the power
menu.
Then press this button consecutively to move the focus
to the desired option if needed.
Press and hold this button for about 2 seconds to use
the function, enter the sub menu or select the option.
Turn off the TV
Press the Control Button to display the power menu
and then press this button consecutively to move
the focus to Power Off.
Press this button consecutively until the Power Off 2
seconds to turn the TV off (standby mode).
Turn on the TV
Press the Control Button, the TV will turn on.
To change volume
Press the Control Button to display the power menu
and then press this button consecutively to move
the focus to Volume Up or Volume Down option. Press
and hold this button to increase or decrease the volume.
To change channel (in Live TV mode)
Press the Control Button to display the power menu
and then press this button consecutively to move
the focus to Channel Up or Channel Down option.
Long press and hold this button to switch to the next or
previous channel in the channel list.
Inputs
Press the Control Button to display the power menu,
the focus will be on the Inputs option.
Press and hold this button for about 2 seconds to display
the inputs list. Scroll through the available input options
by pressing this button. Press and hold this button for
about 2 seconds to switch to the highlighted input option.
To select the Media Player, HDMI 1, HDMI 2, HDMI 3,
HDMI 4, Aerial, Satellite and Composite.
1
Indicators on the TV
2 3
English
12
Note: This manual is for common use. Figures and
illustrations in this User Manual are provided for
reference only and may differ from actual product
appearance. And for some models, certain options are
not available.
You can select all the features from main screen.
Using the Menu
Functions
Using Quick Access Menu
Note: Some of the functions might be unavailable
in certain sources. And for some models, certain
options are not available.
This section explores the menus and settings of your
TV. Each menu is outlined and detailed to help you get
the most from your TV. To access the menu system:
1.
Press and hold the Home button for 2 seconds.
2.
OK to open the corresponding submenu.
3.
OK buttons to make the
OK
to enter and operate according to the on-screen
display or guide.
4.
Press to return to the previous menu.
Menu
Picture: Enter to adjust picture mode or advanced
settings.
Display Mirroring: Enable mobile devices to temporarily
mirror their display to your TV, by making it discoverable.
Sound: To select this option to set the sound
adjustments.
Sleep Timer:
From the main screen you can start any application,
switch to a TV channel, watch a movie or switch to a
connected device, or manage the settings.
Depending on your TV setup and your country
selection in the initial setup the main screen may
contain different items.
You can scroll through the options and content of
your Home screen using the directional buttons.
Available options and content may differ depending
on the network connection status of your TV and
whether you signed in to your Amazon account.
Move the focus to the desired option to display the
content. Available options of the highlighted section
will be positioned in rows generally. Select a row then
move the focus to the desired item in the row. Press
Select button to make a selection or to enter a
sub-menu. The main screen will be opened with the
Home option. With the Search option, you can choose
either to type a word to start a search via the virtual
keyboard or try voice search option (if your remote has
a built-in microphone). Press and hold the Voice button
on your remote (if available) and speak to perform
a search.
Channel Guide: This feature presents an overview of
installed channels and the corresponding programming.
It depends on the related broadcast whether this feature
is supported or not.
Inputs: Use the Inputs menu to change between inputs
and also select the Media Player from here if you have
a USB Drive connected to one of the USB sockets.
The sleep timer function lets you set a
countdown to when your TV will switch off so that you
can fall asleep while watching TV knowing it will
automatically switch off.
To select 5mins, 10mins, 15mins, 30mins, 60mins,
90mins, 120mins, 150mins, 180mins or 240mins.
Main Screen
Sign in and select your Amazon account
Input: To select the input source.
Find: Search (soft keyboard to enter) or Press and
hold to voice search.
Home: Show the Amazon's recommendation.
Live: switch to Live TV mode.
My Stuff: Here's where your purchases, rentals, and
watchlist items will go as you add them.
App: Show the list of favorite applications, or access the
application center.
Settings: Access the system setting.
Apps: Show the list of favorite applications, or access the
application center.
Channel Guide
In order to access the channel guide press the GUIDE
button on the remote.
Use the directional buttons to navigate through the
channel guide. You can use the buttons to switch to
previous/next channel on the list and buttons to
select a desired event of the currently highlighted channel.
If available, the full name,date of the highlighted event
and a brief information about it will be displayed
on the screen.
Channels Scan
English 13
Applications:The applications menu lets you manage
all your apps.
Equipment Control: Add or control devices.
Live TV: This menu allows you to tune in your TV,
manage the channels, set up a CI card and set parental
controls.
To select the Amazon Photos, Silk Browser, Appstore
and Manage Installed Applications.
To select the Channel Scan, Automatic Service Update,
Favourite Channels, Manage Channels, CI Card,
Parental Controls and Sync Sources.
The inputs
1. You can select the Inputs menu through the main screen.
2. You can also access the Inputs menu through the
Settings menu on the main screen.
3. In Homepage press and hold the Home button for 2
seconds, select Input in the menu .
Please make sure your antenna is setup and plugged
into your device.
Press to select Channel Type, to select Terrestrial,
Cable or Satellite.
Terrestrial: To select Terrestrial - Auto Scan or
Terrestrial - Manual Scan.
Cable: To select Cable - Auto Scan, Cable -Manual Scan,
Cable - Quick scan.
Satellite: To select Complete Channel Scan, Manual
Channel Scan and Customised Channel list.
Screen Settings: Screen Settings has 2 different setting,
Aspect (OptionalAuto,16:9, 14:9, Just, 4:3, Zoom)and
16:9 Overscan (Optional: On, Off).
Option Setting:Option Setting has 3 different setting,
Film Cadence Mode, 1080p Pure Direct and 4K Pure
Direct (There are different options depending on
actual channels)
Note: Some menus are only available under the
source or app.
Reset to Defaults:Resets all setting to factory default
settings (All options except view mode).
Sound
Sound Mode: To select the Standard, Music, Speech,
Sport, Stadium and User.
Balance: To select the level of -10 - 10.
Bass: To select the level of -10 - 10.
Treble: To select the level of -10 - 10.
Advanced Settings:
Dialog Enhancer: To select the Off, Low, Mid and
High.
Volume Leveler: To select the Off, Low, Mid and
High.
Speaker Virtualizer: To select the Off, Surround
Virtualizer and Dolby Atmos.
TV Speakers: To select the On or Off.
Reset: Resets all setting to factory default settings.
Settings
Input: To select the input source.
Notifications: Display the notifications.
Account & Profile Settings:
Network:
To select Amazon Account,
Sync Amazon Content, Prime Video, Parental Controls,
Profiles and profile Sharing.
The Network menu has all the settings for
connecting your TV to the Internet. All the available
networks will be shown here and this is where you
configure your network.
If you have connected your TV via an Ethernet cable or
the Wi-Fi option is not set to ON, wireless networks will
not be listed and wireless network related options will
not be available.
Display & Sound: This menu houses all the settings
and adjustments for your picture and sound as well
as other settings.
To select the See All Networks, Join Network Using
WPS(Button), Join Network Using WPS(PIN), Join
Other Network, Configure Network, Save Wi-Fi
Passwords to Amazon, Power on with LAN and Wi-Fi ,
Enable Network and Basic Wi-Fi Troubleshooting Tips.
To select the Picture Settings, Sound Settings,
Apple AirPlay & HomeKit, Power Controls, Audio Output,
Preferred Live TV Language, Enable Display Mirroring,
Navigation Sounds, Screensaver, HDMI-CEC Device
Control and “Do not track” request.
Equaliser:
This menu is available when User is selected
Note:
when sound mode is selected
Users can adjust the appropriate sound
frequency according to their preferences.
Backlight: To select the level of 0 - 100.
Contrast: To select the level of 0 - 100.
Tint: To select the level of -50 - 50.
Sharpness: To select the level of 0 - 100.
Brightness: To select the level of 0 - 100.
Colour Temperature: To select the Cool, Normal,
Picture
Adaptive Backlight Control:
Noise Reduction:
MPEG Remaster:
Resolution Remaster: To select the On or Off.
Intelligent Frame Creation:
To select the Max, Mid, Min and Off.
Warm 1 and Warm 2.
Advanced Settings:To select the Contrast Control,
Colour Gamut, White Balance, Colour Management,
Gamma and Reset to Defaults (This menu will only be
displayed in cinima, ture cinima, filmmaker, game mode).
Viewing Mode: To select the Dynamic, Normal, Cinema,
Filmmaker, True Cinema and Sport.
Colour: To select the level of 0 - 100.
Colour Remaster: To select the On or Off.
Rec.2020 Colour Remaster: To select the On or Off.
Clear Motion: To select the On or Off.
To select the Auto, Max, Mid, Min and Off.
To select the Auto, Max, Mid, Min and Off.
To select the On or Off.
(This menu only plays HDR signal display).
(This menu is displayed only if the input signal is SDR)
14 English
Starting Media Player
1 Insert the USB Flash Memory.
2 Select the mode.
Select
Access
[Your Files]: Displays the thumbnail of all
documents in the USB Flash Memory.
[Videos]:
Displays the thumbnail of all photos in the
USB Flash Memory.
[Images]:
[Audio]:
Displays the thumbnail of video titles in the
USB Flash Memory.
[Contents Display]
Follow the operation guide to perform available
operations.
When the cursor stays on the icon,it displays the
information of the highlighted content.
Your Files:
1. Select Your Files icon.
2. Press up, down, left or right direction button to
select your desired file and press OK to play.
3. Use key to see more option: Multi-select Images
or Sort.
4.
Press return key of remote to stop playing.
Videos:
1. Select Videos icon, then press OK button to view
movie file.
2. Press up, down, left or right direction button to
select your desired file and press OK to play.
3. While playing a Video, press the OK key of remote
to play and pause the video file. Press on the
remote to play the previous or next video Press
fast forward, pause, play, fast backward on the
remote control to control the video file.
Help:If you need a little help using your TV then you
should take a look at this menu. It will show you helpful
videos and quick tips about your TV. It will also give
you contact details for getting support about any
issue you have.
To select the Troubleshooting, Using Your Fire TV,
Amazon Music, Profiles and Parental Controls,
Subscriptions and Purchases, Video and Music with
Alexa, Accessibility, Smart Home and Communication
with Alexa, Have Us Call You and Send Feedback.
Using Media Player
Media Player allows you to enjoy photo, music or
video recorded on a USB Flash Memory.
The picture may not appear correctly on this TV
depending on the digital cameras used.
Display may take some time when there are many
files and folders in the USB Flash Memory.
Partly degraded files might be displayed at a
reduced resolution.
The folder and file names may be different
depending on the digital camera used.
Controllers & Bluetooth Devices:
You can add an additional Voice Remote with Alexa to
your TV, or you may also need to replace one if your
old one broke. Other Bluetooth devices like speakers,
games controllers can also be connected via Bluetooth.
To select the Voice Remotes with Alexa, Game
Controllers and Other Bluetooth Devices.
Alexa:This menu has more information about the
Alexa app, examples of things to try, and you can also
allow your TV to be switched on by your Amazon
Echo speakers.
To select the Alexa App or Things to Try.
Preferences: The preferences menu is where you’ll find
adjustment to lots of the settings on your TV.
Device & Software: This menu will give you information
about your TV, show you legal and compliance
documents. You can also restart or reset your TV back
to factory defaults.
Sleep Timer:
The sleep timer function lets you set a
countdown to when your TV will switch off so that you
can fall asleep while watching TV knowing it will
automatically switch off.
To select 5mins, 10mins, 15mins, 30mins, 60mins,
90mins, 120mins, 150mins, 180mins or 240mins.
Note: The TV will switch off once the sleep time
has elapsed.
To select the About, Developer options, Legal &
Compliance, Sleep, Restart and Reset to Factory Defaults.
-AboutCheck the software version (Setting >
Device & Software > About)
Accessibility:This menu has accessibility options
where you can switch on Closed Caption, Alexa Caption,
VoiceView, Text Banner, Screen Magnifier, High-
Contrast Text (Experimental), Audio Description and
Spoken Subtitles for Broadcast Channels.
To select the Parental Controls, Privacy Settings, Data
Usage Monitoring, Notification SettingsFeatured
Content, Auto Power Off, HbbTV, Sync Recent
Content, Location, Time Zone, Sync Date and Time,
Language, Metric Units and Standby LED.
Displays the thumbnail of music folders in
the USB Flash Memory.
Input signal that can be displayed
Signal name HDMI
525 (480)/60i, 60p
625 (576)/50i, 50p
750 (720)/60p, 50p
1,125 (1,080)/60i, 50i
1,125 (1,080)/60p, 50p, 24p
2,250 (2,160)/60p, 50p, 24p
Mark: Applicable input signal
Signals other than above may not be displayed
properly.
The above signals are reformatted for optimal
viewing on your display.
HDMI connection
This TV incorporates HDMITM technology. HDMI
(high-definition multimedia interface) is the world's first
complete digital consumer AV interface complying with
a non-compression standard.
HDMI allows you to enjoy high-definition digital images
and high-quality sound by connecting the TV and the
equipment.
Applicable HDMI features
Input audio signal:
2ch Linear PCM (sampling frequencies - 48 kHz,
44.1 kHz, 32 kHz)
Input video signal:
"Input signal that can be displayed" (p.15)
Match the output setting of the digital equipment.
English 15
4. Use key to see more option: Start from Beginning,
Play Next video, Repeat this Video, Repeat All Video.
5. Press return key to return directly to the playlist.
Images:
1. Select Images icon, then press OK button to view
the picture.
2. Press up, down, left or right direction button to select
your desired picture file and press OK to show.
3. While showing picture, press on the remote to
play the previous or next picture.
4. Use key to see more option: Hide Info or Show
Info.
Audio:
1. Select Audio icon, then press OK button to listen
to music.
2. Press up, down, left or right direction button to
select your desired file and press OK to play.
3.
5. Press return key of remote to stop playing.
While playing a Music, press the OK key of remote
to play and pause the audio file. Press on the
remote to play the previous or next video Press
fast forward, pause, play, fast backward on the
remote control to control the audio file.
4. Use key to see more option: Turn Shuffle ON or
Off, Repeat this Song, Loop this Album.
Additional
Information
Auto power standby function
The TV will automatically go into Standby mode in the
following conditions:
No signal is received for 15 minutes.
[Sleep timer] is active in the [Menu] (p.12
) or
[Settings] menu (p.13).
Note
Data modified with a PC may not be displayed.
Do not remove the device while the TV is accessing
data. Otherwise this can damage the device or TV.
Do not touch the pins on the device.
Insert the device in the correct direction. Otherwise
this can damage device or TV.
Electrical interference, static electricity, or
erroneous operation may damage the data or
device. Panasonic is not liable for any deterioration
or damage of data or device during operations with
the TV.
It is recommended to connect the USB Flash
Memory directly to the TV's USB port.
Some USB devices or USB HUB may not be used
with this TV.
You cannot connect any devices by using the USB
port.
Additional information for USB devices may be on
the following website. (English only)
http://panasonic.jp/support/global/cs/tv/
USB Flash Memory
For playing back in Media Player
Format: FAT32
Compliance:
USB2.0 port: Supports only USB1.1 or USB2.0
standard.
Maximum USB capacity supported is 1TB.
English
16
Supported file format in Media Player
Image Decoder
Note
Even if these conditions are fulfilled, some files may
not play depending on how they are encoded.
Do not use two-byte characters or other special codes
for data.
Connected devices may become unusable with this
TV
if the file or folder names are changed.
Container format Supported Comments
MP4
M4A
FMP4
WebM
Matroska
MP3
Ogg
WAV
MPEG-TS
MPEG-PS
FLV
ADTS (AAC)
FLAC
AMR
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
Some streams don't
support seek
Containing Vorbis, Opus
and FLAC
Don't support seek
Don't support seek
Don't support seek
Video Decoder
H.263
Vendor HW support
AOSP SW Support
H.264 AVC
Vendor HW support
AOSP SW Support
H.265 HEVC Vendor HW support
MPEG - 2 Vendor HW support
MPEG - 4 SP Vendor HW support
AOSP SW Support
VP8 Vendor HW support
AOSP SW Support
VP9
Vendor HW support
AOSP SW Support
Dolby Vision Vendor HW support
AV1 Vendor HW support
Audio Decoder
MPEG-4 AAC Profile
(AAC LC) AOSP support
AOSP support
AOSP support
AOSP support
AOSP support
AOSP support
AOSP support
AOSP support
AOSP support
AOSP support
AOSP support
MPEG-4 HE AAC Profile
(AAC+)
MPEG-4 HE AACv2
Profile (enhanced AAC+)
AAC ELD (enhanced low
delay AAC)
USAC
AMR-NB
FLAC
AMR-WB
MIDI
MP3
Vorbis
AOSP support
PCM / WAVE
AOSP support
Opus
Vendor SW support
Dolby Audio (DD/DD+/Dolby
Atmos)
Type
File Format
Supported
JPEG
.jpeg .jpg
Yes
GIF
.gif
Yes
PNG
.png
Yes
BMP
.bmp
Yes
General
The TV goes into Standby mode.
This TV is equipped with auto power standby
function (p.15).
The remote control does not work or is
intermittent.
Replace the batteries.
Point the remote control directly at the remote
control signal receiver of the TV (within about 7 m
and 30 degree angle).
Situate the TV away from sunshine or block
sources of bright light from shining on the remote
control signal receiver of the TV.
Parts of the TV become hot.
Even if the temperature of parts of the front, top
and rear panels has risen, these temperature
rises do not cause any problems in terms of
performance or quality.
The TV panel moves slightly when it is pushed
with a finger.
Clattered sound might be heard.
There is some flexibility around the panel to
prevent damage. This is not a malfunction.
Overcurrent error message appears.
The connected USB device might cause this error.
Remove the device and turn the TV off with Control
Button On/Off switch, then turn it on again.
Check foreign objects are not inside the USB port.
Maintenance
First, remove the mains plug from the socket
outlet.
Regular care
Gently wipe the surface of the display panel,
cabinet and pedestal by using a soft cloth.
Wipe the mains plug with a dry cloth at regular
intervals. Moisture and dust may lead to fire or
electrical shock.
For stubborn dirt
First clean the dust on the surface. Dampen a soft
cloth with clean water or diluted neutral detergent
(1 part detergent to 100 parts water). Wring the
cloth and wipe the surface. Finally, wipe away all the
moisture.
Caution
Do not use a hard cloth or rub the surface too hard
as this could scratch the surface.
Do not subject the TV's surfaces to water or
detergent. Liquid inside the TV could lead to
product failure.
English 17
Sound
No sound is produced.
Check the TV Speakers setting (p.
13 ) and volume.
Low level or distorted sound.
Sound signal reception may be deteriorated.
Sound output via HDMI connection is unusual.
Set the sound setting of the connected equipment
to "2ch L.PCM".
Troubleshooting
Before requesting service or assistance, please follow
these simple guides to resolve the problem. If an error
message appears, follow the message's instructions.
If the problem still persists, please contact your local
Panasonic dealer for assistance.
Screen
Red, blue, green or black spots on the screen.
This is the characteristic of liquid crystal panels.
The liquid crystal panel is built with very high
precision technology. Occasionally, a few non-
active pixels may appear on the screen as points
of red, green, blue or black. This does not affect
the performance of your TV and it is not a quality
problem.
Chaotic image, noisy.
Set [Noise reduction] in the [Picture] menu to
remove noise (p.13).
Check nearby electrical products (car, motorcycle,
fluorescent lamp).
No image is displayed.
Check the settings of [Contrast] or [Brightness] in
the [Picture] menu (p.13 ).
Check the TV is in AV mode. If the TV is in AV
mode, check the selected input mode match the
output of the external equipment (p.13).
Unusual image is displayed.
Turn the TV off with Mains power On/Off switch
(p.10), then turn it on again.
Pictures from equipment connected via HDMI are
unusual.
Check the HDMI cable is connected properly.
Turn the TV and equipment off, then turn them on
again.
Check an input signal from the equipment.
Use equipment compliant with EIA/CEA-861/861D.
English
18
Do not subject the surfaces to insect repellent,
solvent, thinner or other volatile substances. This
may degrade surface quality or cause peeling of
the paint.
The surface of the display panel is specially treated
and may be easily damaged. Take care not to tap
or scratch the surface with your fingernail or other
hard objects.
Do not allow the cabinet and pedestal to make
contact with a rubber or PVC substance for a long
time. This may degrade surface quality.
Specifications
Model no.
Dimensions (W x H x D)
43-inch model
TX-43MX800B
50-inch model
TX-50MX800B
55-inch model
TX-55MX800B
43-inch model
965 x 617 x 219 mm (With Pedestal)
965 x 566 x 83 mm (TV only)
50-inch model
1120 x 720 x 269 mm (With Pedestal)
1120 x 652 x 83 mm (TV only)
55-inch model
1234 x 787 x 269 mm (With Pedestal)
1234 x 719 x 83 mm (TV only)
Mass
43-inch model
8.4 kg (With Pedestal)
8.2 kg (TV only)
50-inch model
10.9 kg (With Pedestal)
10.5 kg (TV only)
55-inch model
15.2 kg (With Pedestal)
14.9 kg (TV only)
19.7 kg (With Pedestal)
19.1 kg (TV only)
Connection terminals
AV in
EARPHONE
Mini, 150mV rms~ 250mV rms
HDMI 1 / 2 / 3 / 4 input
TYPE A Connectors
USB
USB2.0 DC 5V, Max.500 mA
Speaker Output
43/50/55/65/75-inch model
Audio output
Digital TV
DVB-T/T2 Standard
DVB-S/S2/C Standard
20 W (10 W + 10 W)
65-inch model
TX-65MX800B
75-inch model
TX-75MX800B
65-inch model
31.5 kg (With Pedestal)
30.4 kg (TV only)
75-inch model
Built-in wireless LAN
Standard compliance and Frequency range
IEEE 802.11 a/b/g/n/ac
2.4~2.5GHz and 5.15~5.825GHz
Security
Support for WPA/WPA2
Built-in Bluetooth
Bluetooth V5.0
2.4~2.48GHz
Note
Design and Specifications are subject to change
without notice. Mass and Dimensions shown are
approximate.
For more product information, please visit EPREL:
https://eprel.ec.europa.eu.
EPREL registration number is available on
https://eprel.panasonic.eu/product
.
English 19
Aerial input
VHF / UHF
Operating conditions
Temperature
0 °C - 45 °C
Humidity
20 % - 80 % RH (non-condensing)
Note
Design and Specifications are subject to change
without notice. Mass and Dimensions shown are
approximate.
Oss License
This product incorporates the following software:
(1) The software developed independently by or for Panasonic Entertainment & Communication Co., Ltd.,
(2) The software owned by third party and licensed to Panasonic Entertainment & Communication Co., Ltd.,
(3) The software licensed under the GNU General Public License, Version 2.0 (GPL V2.0),
(4) The software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or
(5) Open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1.
The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY,
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Please refer to
the detailed terms and conditions thereof Settings > Device & Software > Legal & Compliance > Legal Notices
At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact
information provided below, for a charge no more than our cost of physically performing source code distribution,
a complete machine-readable copy of the corresponding source code covered under GPL V2.0, LGPL V2.1 or the other
licenses with the obligation to do so, as well as the respective copyright notice thereof.
Contact Information: [email protected]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21

Panasonic TX50MX800B Operating instructions

Category
LCD TVs
Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI