Onida 43FIZ-R3 FULL HD FIRE TV KY ROCK User manual

Brand: Onida

Model: 43FIZ-R3 FULL HD FIRE TV KY ROCK

Category: LCD TVs

Type: User manual

INTRODUCTION:

Thank you on Your purchase of ONIDA FIRE TV. Your TV comes with the latest technology

to enhance your TV experience.

Your ONIDA FIRE TV can control all Alexa Enabled Devices.

The latest eco-friendly power saving technology will ensure the TV will go into sleep

mode within 30 minutes, if the TV is idle and no input is connected to the TV.

WHAT'S IN THE BOX :

1. LED TV 2. Remote Control

3. Stand Left & Right 4. Screws for Stand

5. Wall mount 6. Screws for wall mount

7. Concrete Plug(x2) 8. Concrete Screws

9. User Guide. 10. Marketing Insert. (optional)

Note: *Batteries are not provided with this LED/LCD TV model

After Unpacking, please inspect your TV for damage. If you notice any damage please

consult your Dealer

Accessories may not be placed all together. Take care not to throw them away

unintentionally.

This product contains possibly dangerous parts (such as plastic bags), that can be

breathed in or swallowed by young children accidentally. Keep these parts out of reach

of young children.

INTRODUCTION & OPERATION FOR ONIDA FIRE TV :

Your ONIDA Fire TV remote includes a wireless remote with a 5-way directional track pad

that allows you to quickly and easily navigate your device.

Before you can use the remote, you must install the 2 AAA batteries and pair it

with your ONIDA Fire TV .

1.Slide open the battery compartment on the back of the Remote

control.

2.insert two AAA size batteries. Make sure to match the (+) and (-)

ends of batteries match with Remote (+) and (-).

3.SIide back the battery compartment. Make sure it clicks into

place.

Tips For Better Life For Battery:

For better reliability and longevity use 1.5 volt x 2 AAA"ALKALINE BATTERIES'’

page:2

page:3

Onida Fire TV Hardware Basics

DIGITAL

AUDIO OUT

HEAD PHONE

COMPOSITE/

VIDEO IN

HEAD PHONE

USB 2.0

OPTICAL

AUDIO OUT

COMPOSITE IN

R. AUDIO IN

L. AUDIO IN

ANTENNA

LAN HDMI 3 HDMI 2 HDMI 1/ARC

Power/lnput Button: on the bottom Of TV

1. To switch the TV from Standby, please press this button once.

2. When the TV is ON by pressing once the list of Input Sources Will be

displayed and you can select any source from the mentioned

list by highlighting the source. (*Optional)

3. When TV is ON, by pressing & holding this key for few seconds to put the TV into

Standby

*This function work in selected onida model only

Note: The location and names of the function buttons and power button on the TV may

vary according to TV model.

page:4

Guide

Setting

It displays "Recently accessed or used content

It will display the "Apps and Games" which downloaded Launch these Apps. from any screen

with TV set in ON condition or TV is in standby, by pressing these hot keys

Press to open the LIVE TV programs guide

Access Quick setting menu

Recent

The Fire TV Remote App is not designed to play games. Some games might work, but performance will vary.

Play/Pause

CH+/CH-

Press the rewind button once to skip 10 seconds backward Press and

hold the rewind button to continue navigating backward in the video.

Additional presses allow you to cycle through the available speed options.

Stand By

Alexa

Select

Back

Rewind

Turns TV power ON or OFF, when your TV is OFF the LED indicator on the

front of the Tv will light up

Hold down to turn on the ALEXA- enable microphone and start voice

input. Release the button to end voice input. with ALEXA, you can use

your voice to search for content control playback, and much more.

(ALEXA Voice service requires Amazon account)

Confirm a selection

volume +/-

Increase(+) or Decrease (-) the TV volume

Returns you to the Home screen from any screen on your Fire TV device.

Presents various functions and settings depending on which screen you are

accessing.

Start, Resume, or Play back of USB contains or internet video streaming

Mute

Home

Forward

Return to the previous screen

Mute or Unmute the audio of TV

Press the forward button once to skip 10 seconds forward. Press and hold the

forward button to continue navigating forward in the video. Additional presses

allow you to cycle through the available speed options.

To navigate channel UP or Down

action Move UP, DOWN, LEFT or RIGHT

Navigation

Initial Setup for Onida Fire TV With Unboxing

Setting up language

When the TV is switched on for the first time, the desired language selection menu is

shown. Follow the below instructions to select the menu language:

1.) Press the navigation button (4) on the Remote control to highlight the desired language

then press the select button (3) on the remote control to confirm the selection

Refer following image for language setup. please refer fig.1

2.) Once the language option has been chosen, customer should choose'Continue' in

continue or store use mode page. please refer fig.2

Pairing Your Remote Control With TV Set:

Customer can be use following procedure for pairing remote with fire TV.

Procedure 1.Here customer scan QR code from mobile which is displayedon TV screen

and download Fire TV App. from google play store. and select set up new device and

follow the instructions.

OR (please refer fig,3 on next page for Remote control pairing )

Procedure 2. Customer press remote “SELECT”(3) button for Set up with Remote, it is

searching remote and paired remote automatically with Fire TV ,

Fig.1

Fig.2

page:5

Some time it will be happen it is take a time or not paired automatically, customer refer

following image which is shown on TV screen for paired remote control manually, pressing

the “HOME’’ (9) button on the remote for 10 second. refer fig.4

When remote paired with Onida Fire TV following POP UP massage shown, it means now

TV is connected to Fire TV. refer fig.5

Pairing Your Remote Control With TV Set:

Fig.3

Fig.4

Fig.5

page:6

Set Up a Wireless or Wired Connection

Fire TV supports wireless or wired Internet connections. Connect your Fire TV device to

the Internet to access movies, TV shows, games, and apps.

Wired Network Connection :(with initial setup )

a. Connect one end of an Ethernet cable (not included) to the back of your Fire TV, and then

connect the other end to your router. click on “Configure Ethernet connection”and enter

your IP address ,refer fig.6 and fig.7 ,

you will now be asked to sign in to your Amazon account ,please refer “Sing in to your

Amazon account page

fig.6

fig.7

b. From the Home screen, select Settings > System. Next to Network, you will see

Wired.

c. After you connect to a wired network, press the Home button to display the Home

screen.

* ,no needs In the initial setup flow after remote paring screen, network page will show

to point (b) and point (c) connecte wireddevice will automatically for network no need

to setting button

page:7

Wireless Network Connection:

a. From the Home screen, select Settings > Network > Wi-Fi.Your Amazon Fire TV device automatically detects

nearby Wi-Fi networks that broadcast their network name. Some networks are open for everyone to join, while

others require a password to connect.

b. Under Available Networks, select a wireless network and enter the network password (if required)

using the onscreen keyboard. You can also use the keyboard in the Fire TV Remote App.

*In the initial setup flow after remote paring screen, network page will show and device will automatically scan

for network no need to setting button. refer fig.8 and fig.9

Fig.8

Fig.9

TIP :

• For optimal wireless performance, do not place your Amazon Fire TV in an enclosed cabinet, as it impacts signal

strength to the device, remote, and game controllers.

• For Fire TV, if you are switching from a wired to a wireless connection, disconnect the Ethernet cable

from your Amazon Fire TV device before switching to a wireless connection.

refer fig.10,and fig.113.) WPS button (Wi-Fi Protected Setup)

a.) For select routers, it is possible to establish connection between the TV and the router without the need for

a password. Refer to the router user manual for more details.

b.) Press the navigation button (4) and select 'Connect using WPS Push Button', then press the select button (3)

to confirm.

c.) Press the WPS button on the router. The TV will connect to the router automatically without the use of a

password.

page:8

3.) WPS button (Wi-Fi Protected Setup)

d. A code will appear on the screen. Enter this code into the router. It may take up to two minutes to connect.

Refer fig. 10 and fig.11 for WPS

Fig.10

Fig.11

In order to use your Amazon Fire TV device, register it to your Amazon account.Refer fig.12

To register your device, connect it to the Internet. To learn more, go to Set Up a Wireless or Wired

Connection on page

Signing-in to Amazon account refer fig.12,fig.13,and fig.14

To verify that your Amazon Fire TV device is registered to your Amazon account:

1. From the Home screen, select Settings > My Account.

• If no account is currently registered, select Register to register your Amazon Fire TV device to the

desired Amazon account.

• If you would like to register a different Amazon account, select the Amazon account that is currently

registered, and then select Deregister.

Following step for register your account

remote Press the navigation button (4) and select 'I already have an Amazon account then press

remote the select button (3) to confirm.

page:9

If you purchased your Amazon Fire TV device online from Amazon using your Amazon account, it should

already be registered to you. If you purchased your Amazon Fire TV device from another retailer or

received it as a gift, follow the on-screen instructions for entering your Amazon account information and

password.

Note: If you do not have an Amazon account, press the navigation key (4) and select "l am

new to Amazon and follow the instruction on screen to register. Refer fig.12

Once selected, you will be prompted to visit a web link to complete registration on the

handheld device such as mobile phone or tablet

page:10

Fig.12

Fig.13

Fig.14

Signing-in to Amazon account

Enter your email id registered with Amazon account along with the password. FoIIow on

screen instructions to enter an alphanumeric code to link your Amazon ID to TV set.

refer fig.15

3.) Enter the email address that you use for your Amazon account, then select NEXT and

press the select button (3) to confirm

4.) Enter your Amazon account password, then select SIGN IN and press the select button

(4) to confirm.refer fig.16 and fig.17

page:11

Fig.15

Fig.16

Fig.17

Signing-in to Amazon account

5.) Select CONTINUE then press the select button (3) to confirm.

6.) If you would like to save your WI Fl password to your amazon account, select YES then

press the select button (3) to confirm . If you do not want to save your WI Fl password to

your account, select NO then press the select button (3) refer fig.18

7.) If you want to enable the parental controls you can do it at this point or you can do it

later, Select "Enable Parental Controls" or "No Parental Controls" accordingly and confirm

with select button (3) refer fig.19

Select popular apps to download : refer fig. 20 and fig.21

You can now select all the popular apps that you would like to download Once selected,

they will download automatically in the background while the TV is tuning. There are 4

categories to choose from. More apps will be available once you have setup the TV, so

you can skip this stage if you want.

1.) Press the navigation button (4) and select 'Choose Apps' then press the select

button(3) to confirm. You can also select 'No Thanks' if you prefer to download the apps

later.

2.) Select the app(s) that you would like to download from section using the navigation

button (4), press the select button (3) to confirm.

page:12

Fig.18 Fig.19

Fig.20 Fig.21

3.) Press the navigation button (4) to move to 'Movie & Music Services'.

4.) Select the app(s) that you would like to download from the 'Movie & Music Services'

section using the navigation button (4) and press the select button (3) to confirm

5.) Press the navigation button (4) to move to 'Original Show Services'.

all of the apps you want and

then download them at tSelect he

end

They're all free to download. Some apps may require payment for full access

Choose Apps

No Thanks

Which popular services do you want ?

page:13

6.) Select the app(s) that you would like to download from the 'Original Show Services'

section using the navigation button (4) and press the select button (3) to confirm 7.) Press

the play/pause button (12), once you have chosen all the apps you'd like to download. A list

of selected apps will appear. Press the select button (3) to finish. the process. These apps

will start to download while you tune into the TV

Data Monitoring Setup : refer fig. 22,fig.23,and fig.24

You can monitor and control the amount of data your TV uses while streaming apps and

downloading data. 1.) Press the navigation button (4) and select Enable Data Monitoring',

then press the select button (3) to confirm. You can also choose 'Set up Later' if you prefer

to enable this feature later.

2.) Press the navigation button (4) to choose the preferred video quality, then highlight

'Next' and press the select button (3) to continue.

3.) Set the amount of data in GB per month which your TV can use, then highlight "Next"

and press the select button (3) to continue.

4.) Enter the start date of your monthly internet bill, then highlight 'Next' and press the

select button (3) to continue

5.) A confirmation box will appear on the screen. You can go back by selecting. Previous',

or select 'Done' to save the settings.

Now your fire TV initial setup complete, and you ready to watch your TV programs or play

LIVE online streaming like youtube, prime video, netflix and many more..refer fig.25

Fig.22 Fig.23

Fig.24 Fig.25

live TV and access your favourite apps.

Easily navigate with Main Menu

Main Menu lets you easily find new content, play

Personalise Fire TV with Profiles

Create up to six profiles for personalised

recommendations, watch lists, viewing history

and more.

Decide what to watch with Find

Find is your destination to search and discover

movies, TV programmes, apps, free ad-supported

content and more.

Customise the apps in your Main Menu

Quickly access your favourite apps and get a peek

at recommended content

Welcome to Fire TV

page14

Following Step Refer for DTH Connection with “EQUIPMENT CONTROL”

DTH Connection with “EQUIPMENT SELECTION”

OPTICAL AUDIO OUT

DIGITAL AUDIO OUT

HEAD PHONE

CAUTIONS:

• Check the jacks for position and type before making any connections.

• Loose connections can cause poor audio or video quality. Make sure that all connections

are tight andsecure.

• The external audio/video equipment shown may be different from your equipment. If

you have questions, refer to the documentation that came along with your equipment.

• Always unplug the power cord when connecting external equipment.

page:15

Plug for connecting to external modem or network

access equipment. connect an ethernet cable to this

jack. Please refer page no. 18

On some TVs the headphone jack and audio out jack are

Combined into one jack. see page no. 20 Connect

headphones, a sound bar, analog speaker system, or a

home theater system to this jack to listen to TV audio

through external speakers. See Analog audio on Page.20

Connect a sound bar, digital audio system or home

theatre System to this jack to listen to TV audio

through external speaker. refer page 18

Connect the video and audio for an AV device like

(setup box, blue ray, DVD, Camcorder etc..) to these

jack. setup box to TV set and connection for Blue ray

or DVD with TV set refer page no.17

Socket can be use to a PC with a compatible video card

installed certain DVD player or Blue ray or a high-

definition compatible digital satellite decoder. this socket

provide an uncompressed digital connection that carries

video and audio data by way Of an integrated mini plug

cable. for connection refer page 16 for setup box and

page 17 for blue ray, connection with computer page 18

HDMI 1 is supported ARC(Audio return channel)

function. connect an ARC-enabled home theater

receiver to this jack for connection refer page19

These socket can be used to connect an USB device like

(flash drive to view compatible audio, video and picture

files. refer for connection page 19

Connect an antenna coaxial cable to this socket(jack)

refer for connection page 16

Note: This manual is for common use.

Figures and illustrations in this User

Manual are provided for reference only

and may differ from actual product

appearance. And for some models,

certain options are not available. You

can select all the features fromHome

page

1. Press to display homepage.

2. Press to select icons from the

screen list.

3. Press OK to enter each option

4. To exit the menu, press

To select required source please press (Quick Access Menu)

or press the key once on the TV set, the menu as shown will appear. select the required

source You can select the Source from "HOME" page directly by selecting the source Icon.

Connecting a Cable or set Top box or DTH.

Many cable or STB TV boxes have more than one connection type. To get the best video,

you should use the best connection type available. You can connect a cable or STB /DTH

using (in order of preference)

1) .Make sure that your TV's power cord is unplugged and all connected equipment is

turned Off.

2 .)Connect a coaxial cable (not provided) to the cable wall jack and to the

cable -in jack on the cable or

STB. 3.) Connect an HDMI cable

(not provided) to one of the

HDMI jacks on your TV and to

the HDMI out jack

on the cable or STB/DTH box 4 .) 0n the HOME screen, navigate to the INPUTS row, then

select HDMI 1 ,HDMI 2 or HDMI 3

Note: An HDMI cable carries both audio and video. You do not need to use separate

audio cables

Connecting An Antenna : 1.) Make sure that your TV's power cord is unplugged and all

connected equipment is turned

off.

2.) Connect a coaxial cable

(not provided) to the antenna/

cable jack on your TV and to the

antenna or cable connection.

3.) Plug your TV's power cord into a power outlet, then turn on your TV.

4.) On the HOME screen, navigate to the INPUTS row, then select Antenna.

5.) If you cannot tune to channels you know exist, scan for channels. Go to

Settings > Live TV > Channel Scan

Note: • Use a coaxial cable to eliminate interference and noise from radio waves.

page:16

• If the antenna is not installed correctly, contact qualified service personnel to correct the

problem.

• If the signal level for a channel is weak, the picture may be distorted. Adjust the

antenna or use a highly directional outdoor or set top Antenna with a built in amplifier.

• If the picture quality is good on some channels and poor on others, the problem may be

caused by a poor or weak signal from the Broadcaster or cable TV provider.

• If you connect to cable TV without a set top box and experience poor picture quality, you

may need to install a set top box to improve Signal reception and picture quality. Contact

your cable TV provider about upgrading to a set top box.

IMPORTANT: When you connect the audio using the AV jacks, the signals are analog

4 .Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable

or STB/DTH box

5 .0n the HOME screen, navigate to the INPUTS row, then select Composite

1.) Make sure that your TV's power cord is unplugged and all connected equipment is

turned Off. 2.) Connect a coaxial cable (not provided) to the cable wall jack and to the

cable-in jack on the cable or STB box

3. Connect an AV cable (not

provided) to the AV/Composite

jacks on your TV and to the AV out

jacks on the cable or STB box.

Connecting a DVD or Blue ray player.

Many DVD or Blue-ray players have more than one connection type. To get the best video,

you should use the best connection type available.

You can connect a DVD or Blue-ray player using. *HDMI *AV/Composite

1 .) Make sure that your TV's power cord is unplugged and the DVD or Blue ray player is

turned off.2 .) Connect an HDMI cable (not provided) to one of the HDMI jacks on your TV

and to the HDMI out jack on the

DVD or Blue-ray player.

3 .)plug your TV's power cord into a

power Outlet, then turn on your

TV and DVD or Blue-ray player.

4 .) 0n the HOME screen, navigate to the INPUTS row, then select HDMI 1,HDMI 2 or

HDMI 3

Note: An HDM1 cable carries both audio and video. You do not need to use any separate

audio cables

AV/Composite :

Note: Cables are often color-coded to match color-coded jacks

1. Make sure that your TV's power cord is unplugged and the DVD or Blue-ray player is

turned off.

page:17

2. Connect an AV cable (not provided) to the AV jacks on your TV and to the AV out

jacks on the DVD or Blue ray player.

IMPORTANT : When you connect the

audio using the AV jacks, the signals are

analog

3. Plug your TV's power cord into a

power outlet, then turn on your TV and

DVD or Blu-ray player.

4. If needed, set the player to the correct output mode. See the documentation that came

along with the player.

5 .0n the HOME screen, navigate to the INPUTS row, then select Composite.

Connecting to Ethernet / Rj45 : To access the Internet, you can connect to a LAN

(Ethernet) network If you do not

want to connect to Wi-Fi.

• Connect an Ethernet cable

(not provided) to the LAN jack on

your TV and to your Ethernet

Connecting a Computer : 1.) Make Sure that your TV's power cord is unplugged and the

computer is turned Off.

2.) Connect an HDMI cable

(not provided) to one of the HDMI

jacks on your TV and to the HDMI

out jack on the computer.

3.) plug your TV's power cord into a power outlet, then turn on your TV and the computer.

4.)On the HOME screen, navigate to the INPUTS row, then select HDMI 1, HDMI 2, HDMI3

Connecting External Speaker or a Sound bar :

You can connect external speakers or a sound bar using: * Digital audio * Analog audio

1. ) Make sure that your TV power cord is unplugged & the digital speaker system or

sound bar is turned off.

2.) Connect a SPDIF audio cable (not provided) to the SPDIF output jack on your TV and to

the audio in jack on the digital speaker system or sound bar.

3.) Plug your TV's power cord into a

power outlet, then turn on your TV.

4.) Turn on the digital speaker

system or sound bar, then set it to

the correct source. See the

documentation that came along with the digital speaker system or sound bar

Note: Depending on the audio device you are connecting, you may need to change the

digital audio format for your TV. The default setting is Auto

page:18

5.)If you need to change the digital audio format, go to the Home menu, select Settings,

then select Display & Sounds, then Select Audio Output, then select Digital Audio Format

and change the setting to PCM or Dolby Digital.

6.)If you want to turn off your TV speakers, go the Home menu, select Settings, then select

Display & Sounds. Select Audio Output, then select TV Speakers and change the setting to

OFF.

Connecting a USB flash drive Plug a USB flash drive into the USB port on your TV. It

takes few seconds for detecting flash drive." Content

loading" message will be seen on TV screen, after

detecting flash drive, on TV you will see four options.

1) Your Files: for all content are visible,

2) Video: only compatible Video content play

3) Image: only compatible image file format play

4) Audio: only compatible Audio format play

To safely remove USB storage, you need to "eject" it from your Amazon Fire TV first:

Digital audio using the HDMI/ARC:

Your TV can send sound to an ARC device, like an AV receiver, to create a home theater

that uses two or more speakers. When you connect external speakers or a sound bar,

sound plays through your TV speakers and the external speakers or sound bar.

1. )Make sure that your TV's power cord is unplugged and the digital speaker system or

sound bar is turned off.

2.) Connect an HDMI cable

(not provided) to the HDMI 1/Arc

jack on your TV and to the audio

in jack on the digital speaker

system or sound bar.

3.) Plug your TV's power cord into a power outlet, then turn on your TV.

4 .) Turn on the digital speaker system or sound bar, then set it to the correct source. See

the documentation that came along with the digital speaker system or sound bar.

Note: Depending on the audio device you are connecting, you may need to change the

digital audio format for your TV. The default setting is Auto.

5.)If you need to change the digital audio format, go to the Home menu, select Settings,

then select Display & Sounds, then Select Audio Output, then select Digital Audio Format

and change the setting to PCM or Dolby Digital.

6.If you want to turn off your TV speakers, go the Home menu, select Settings, then

select Display & Sounds. Select Audio Output, then select TV Speakers and change the

setting to OFF.

CAUTION:

• Your TV should only be operated from the power source indicated on the label.

• Always unplug the power cord from the power outlet when you will not be using your

TV for an extended period of time.

page:19

Connecting Power :

1.) If your power cord is not permanently connected to your TV, connect it to the power

connector on your TV.

2.) Connect the power cord to a power outlet.

CAUTION:

• Your TV should only be operated from the power source indicated on the label.

• Always unplug the power cord from the power outlet when you will not be using your TV

for an extended period of time.

When you connect headphone, The TV speakers are cutoff

WARNING: Loud Noise can damage

your hearing, when using

headphone, use the lowest volume

setting on your headphone that still

lets you hear the sond

2 Connect an audio cable (not provided) to the audio out jack on your TV and to the

audio in jacks on the analog speaker system or sound bar.

3 Plug your TV's power cord into a power outlet, then turn on your TV.

4 Turn on the analog speaker system or sound bar, then set it to the correct source. See

the documentation that came with the analog speaker system or sound bar.

Connecting Power :

1 If your power cord is not permanently connected to your TV, connect it to the power

connector on your TV.

2 Connect the power cord to a power outlet.

CAUTION:

• Your TV should only be operated from the power source indicated on the label.

• Always unplug the power cord from the power outlet when you will not be using your

TV for an extended period of time.

Analog audio: (Optional)

When you connect an analog speaker system or sound bar to the audio out jack, the TV

speakers are muted.

1 Make sure that your TV's power

cord is unplugged and the analog

speaker system or sound bar is

turned off.

page:20

Page is loading ...

Onida 43FIZ-R3 FULL HD FIRE TV KY ROCK User manual

Brand: Onida

Model: 43FIZ-R3 FULL HD FIRE TV KY ROCK

Category: LCD TVs

Type: User manual

Download PDF

report

Onida 43FIZ-R3 FULL HD FIRE TV KY ROCK User manual

Onida 43FIZ-R3 FULL HD FIRE TV KY ROCK User manual

Other documents