Genaray BATON-53 User manual

Brand: Genaray

Model: BATON-53

Category: Stroboscopes & disco lights

Type: User manual

This manual is also suitable for

BATON-34

USER MANUAL

SpectroLED

Baton

LED STICK LIGHT

SpectroLED Baton LED Stick Light - USER MANUAL

THANK YOU FOR CHOOSING GENARAY

The Genaray Baton is a bicolor wand-style LED light that

provides even illumination along its entire length. The

Baton’s simplicity and portability is surpassed only by

its versatility. It packs up in its own carry bag and is light

enough to take anywhere. Use it as a key light, an accent

light, or for background ambience. As a handheld ﬁxture,

it can create dramatic indoor or outdoor effects for photo

and video shoots. The ﬁxture’s integrated diffuser prevents

the multiple shadows that are common in LED lighting, and

it throws a soft, wide, wraparound beam that’s perfect for

portraits and group photos.

Preset color temperature and brightness buttons allow

for instantaneous changes to the settings. The Baton runs

on AC or battery power with the optional battery grip (sold

separately). When you add the battery grip to the 20- and

34-inch models, the Baton becomes a handheld light.

SpectroLED

INTRODUCTION

SpectroLED Baton LED Stick Light - USER MANUAL 3

· Please read and follow these

instructions, and keep his

manual in a safe place.

· Keep this unit away from water and

any ﬂammable gases or liquids.

· Make sure the unit is powered off

when plugging it into a power source.

· Use only the correct,

recommended voltage.

· Do not attempt to disassemble of

repair the equipment. Doing so will

void the warranty, and Genaray will

not be responsible for any damage.

· Handle the unit with care.

· Do not stare directly at the lights

when they are powered on.

· Clean the unit with only

a soft, dry cloth.

· Keep this unit away from children.

· Use only parts provided

by the manufacturer.

· Make sure the item is intact and

that there are no missing parts.

· All images are for illustrative

purposes only.

PRECAUTIONS

Precautions

SpectroLED Baton LED Stick Light - USER MANUAL

BATON

OVERVIEW

5-pin mini DMX in/out ports

Threaded ring for battery handle

Front

SpectroLED Baton LED Stick Light - USER MANUAL 5

Product overview

Color temperature

preset buttons

LCD screen

Power button

Mode button

Up/Down buttons

Brightness

preset buttons

Magnet mount sockets

Back

SpectroLED Baton LED Stick Light - USER MANUAL

BATON

OVERVIEW

Power button

Mode button

Up/Down buttons

4-pin power input port

Top

Bottom

LCD screen

SpectroLED Baton LED Stick Light - USER MANUAL 7

Product overview

Arca-Swiss style ballhead mount

Arca-Swiss style

mount

Release knob

Ballhead tension knob

Locking knob

5/8-inch receiver/11⁄8-inch stud

SpectroLED Baton LED Stick Light - USER MANUAL

MOUNTING THE

BATONCONTENTS INCLUDE

· Baton light ﬁxture

· AC adapter

· Power cable

· DMX Cable

· Magnet mounts

· Arca-Swiss style ballhead mount

· Carrying case

· User manual

ATTACHING THE ARCA-

SWISS STYLE MOUNT

1. Loosen the release knob, and ﬁt

the back edges of the Baton into

the grooves of the mount.

2. Tighten the release knob until secure.

contents

SpectroLED Baton LED Stick Light - USER MANUAL 9

MOUNTING THE BATON

TO A LIGHT STAND

The included ballhead can be mounted

onto any light stand with a 5/8-inch stud.

The 5/8-inch receiver has a pass-

through, so the ballhead can be

mounted horizontally or vertically.

1. Mount the Baton on a light stand

with a 5/8-inch stud, and turn the

locking knob until secure.

2. Adjust the orientation of the Baton by

loosening the ballhead tension knob.

To mount the Baton on a stand with

a junior receiver or combo head:

1. Remove the locking knob so the base of

the ballhead becomes a 11⁄8-inch stud.

2. Insert it into a junior receiver.

MOUNTING TO A TRIPOD

The battery handle has a 1/4-20 threaded

socket for convenient tripod mounting.

1. Screw the battery handle onto the tripod’s

1/4-20 mounting post until it’s secure.

2. Attach the Baton to the handle by

following the instructions below in

Using the Baton with Battery Power.

USING THE MAGNET MOUNTS

Screw the included magnets into the

sockets on the back of the Baton, and attach

the ﬁxture to any ferrous metal surface.

instructions

SpectroLED Baton LED Stick Light - USER MANUAL

USING THE BATON WITH AC POWER

Important

The Baton is a multivoltage ﬁxture capable

of running on 100 to 240 V, 50/60 Hz. The

included cable has a 120 V, 50 Hz plug. To

use this ﬁxture with other voltages, you

must use a plug adapter (sold separately).

Connect the AC power adapter to the Baton

with the 4-pin XLR cable, and use the power

cable to connect the adapter to an outlet.

Important!

The 4-pin connector should easily attach.

Don’t use force to plug the XLR connector

into the Baton’s power input plug.

USING THE BATON WITH

BATTERY POWER

The Baton-20 and Baton-34 models have

the option of running on the Genaray

BATON-BAT, a dedicated rechargeable

battery handle that attaches to the

base of the Baton (sold separately).

1. Align the XLR connector with the

pins on the bottom of the Baton.

2. Press the battery pack onto the

Baton, and turn the locking ring

clockwise to tighten until secure.

To check the remaining power in the battery

pack, press and hold the power indicator.

4 lights Fully charged

3 lights 75%

2 lights 50%

1 light 25% or less. Recharge the battery.

POWERING THE

BATON

instructions

SpectroLED Baton LED Stick Light - USER MANUAL 11

OPERATING THE

BATON

TURNING ON THE BATON

Warning!

When set to full brightness, the Baton is

a powerful light. Do not look directly into

the light while it’s being switched on.

Press the ON/OFF button

to turn on the Baton.

ADJUSTING THE BRIGHTNESS

The Baton starts up in brightness

adjustment mode.

Use the Up/Down buttons to adjust

the brightness in 1% increments.

Brightness Preset Buttons

Press to set brightness to 25%, 50%,

75%, and 100%. Use the Up/Down

buttons to ﬁne-tune the brightness.

ADJUSTING THE COLOR TEMPERATURE

1. Press the Mode button to enter

color temperature mode.

2. When the color temperature blinks, use

the Up/Down buttons to ﬁne-tune the

color temperature in 100 K increments.

When no adjustment is made after

5 seconds, the color temperature is

set, and the Up/Down buttons return

to brightness adjustment mode.

Color Temperature Preset Buttons

Press to select 2800, 3200 (tungsten

balance), 4300, 5600 (daylight balance),

or 6500 K color temperature.

Press the Mode button to use the Up/

Down buttons to ﬁne-tune the color

temperature in 100 K increments.

instructions

SpectroLED Baton LED Stick Light - USER MANUAL

The Baton supports DMX-512, so

the light’s settings can be remotely

controlled from a DMX console.

To set up DMX operation on the

Baton, follow these steps:

1. Use the included 5-pin cable to attach

a DMX controller to either one of the

mini DMX ports. The other port will

automatically become the output port.

2. Use the other mini DMX port to connect

multiple lights.

Note: If the Baton is the only light

connected to the DMX controller, no

DMX termination is necessary.

3. Refer to the DMX controller’s user

manual to set its DMX address.

SETTING THE DMX ADDRESS

The DMX address is a 3-digit

number from 001 to 512.

1. Double-press the Mode button. The

three-digit DMX address will blink.

2. Press the Up/Down buttons to select

a DMX address in increments of 1.

3. Press the Mode button to set

the address and return to

brightness adjustment mode.

Important!

Make sure the DMX address on the Baton

matches the DMX console’s address.

USING DMX

instructions

SpectroLED Baton LED Stick Light - USER MANUAL 13

DMX CONTROL

DMX Address

on LCD screen

Corresponding Channels

on DMX Console

11-1 Brightness

1-2 Color temperature

21-2 Brightness

1-3 Color temperature

— —

16 1-16 Brightness

2-1 Color temperature

17 2-1 Brightness

2-2 Color Temperature

— —

511 32-15 Brightness

32-16 Color temperature

512 —

instructions

SpectroLED Baton LED Stick Light - USER MANUAL

PRODUCT

SPECIFICATIONS

LIGHT FIXTURE

Output Power: 20: 28 W

34: 58 W

53: 88 W

Beam Angle: 110°

Color Temperature: 2800 ±150 K to 6500 ±300 K

Color Accuracy Standard: CRI: 95 to 98

TLCI: 95

Dimming: 100% to 10%

Display: LCD

Housing Material: Metal

Photometrics @ 3ft.

20: 628lx @3200K, 625lx @4400K, 627lx @5600K

34: 1148lx @3200K, 1125lx @4400K, 1145lx @5600K

53: 1467lx @3200K, 1495lx @4400K, 1554lx @5600K

Number of LEDs: 20: 192

34: 320

53: 512

Expected Lamp Life: 50,000 hr.

Dimensions (H × W × D): 20: 2 × 2 × 22 in.

(5 × 5 × 56.6 cm)

34: 2 × 2 × 36 in.

(5 × 5 × 91.6 cm)

53: 2 × 2 × 55 in.

(5 × 5 × 139.6 cm)

Weight: 20: 1.74 lb. (0.79 kg)

34: 2.4 lb. (1.1 kg)

53: 3.4 lb. (1.54 kg)

sPecifications

SpectroLED Baton LED Stick Light - USER MANUAL 15

CONNECTORS

Power Input Connector: 4-pin male XLR

DMX Connector: 5-pin mini male XLR

MOUNTING

Fixture Mount: 5/8 in. receiver

11⁄8 in. stud

Arca-Swiss style mount

POWER

AC Input Power: 100 to 240 V AC, 50/60 Hz

DC Input Power: 27 V DC

Power Source: AC Adapter, 4-Pin XLR

Max Power Consumption: 20: 28 W

34: 58 W

53: 88 W

sPecifications

ONE-YEAR LIMITED WARRANTY

This Genaray product is warranted to the original purchaser to be free from defects in materials and

workmanship under normal consumer use for a period of one (1) year from the original purchase date

or thirty (30) days after replacement, whichever occurs later. Genaray’s responsibility with respect

to this limited warranty shall be limited solely to repair or replacement, at Genaray’s discretion, of

any product that fails during normal use of this product in its intended manner and in its intended

environment. Inoperability of the product or part(s) shall be determined by Genaray. If the product

has been discontinued, Genaray reserves the right to replace it with a model of equivalent quality and

function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse,

improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, GENARAY MAKES NEITHER

ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This

warranty provides you with speciﬁc legal rights, and you may also have additional rights that vary from

state to state.

To obtain warranty coverage, contact the Genaray Customer Service Department to obtain a return

merchandise authorization (“RMA”) number, and return the defective product to Genaray along with

the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own

risk and expense.

For more information, or to arrange service, visit www.genaray.com or contact us at info@genaray.com.

GG4

Genaray BATON-53 User manual

Brand: Genaray

Model: BATON-53

Category: Stroboscopes & disco lights

Type: User manual

This manual is also suitable for

BATON-34

Download PDF

report

Genaray BATON-53 User manual

This manual is also suitable for

Genaray BATON-53 User manual

Related papers

Other documents