User Manual
Upgraded 10inch Ring Light with Tripod Stand
How to install the phone clip
Suitable for most of USB port
Selfie ring light powered by 5V USB interfaces can be plugged
into laptop, mobile power etc for power supply.
Step1:
Insert the black ring screw and
pole mount phone holder into
the clip orderly.
Step2:
Tight the phone holder by rotating
the ring screw.
Step3:
Flip the ring, choosing a suitable
position, lock the fliplock by
pressing the black piece.
How to use selfie stick with tripod
How to Choose Lighting Mode
Brigtn ess Down
Brigtness Up
ON/OFF
Lighting Color Switch
1.Adjust the tripod leg up and down, fix the tripod leg by
rotating the screw clockwise (counterclockwise loosened).
4.Loos en the screw counterclockwise, select the appropriate
angle (1 80 rotation angle), then tighten the screw clockwise
to fi x the selfie stick platform head.
3.Rota te the screw to tight or remove the light and
other accessories.
2.Extend the tripod stick from bottom to top by unlocking the
lock catch , lock the lock catch to fix the tripod stick at any
desire d height.
2.Keep the light fixed, tight t
he light by
rotating the screw.
base
Screw
1.Instal l the light screw hole into the
selfi e stick screw .
How to assemble the ring light
screw
Platform head
180
MODE1
White
Warm White
Yellow
MODE2
MODE3
3-Light Mode， -Level Brightness
Thank you for purchasing our product.
For better experience, please read the instruction carefully and hope you
enjoy our product! If you have any questions, please contact us without
any hesitate. Thank you.
Ring Light
Saddle Plate
Buckle
Cellphone Holder
Selfie Remote
Control
Lighting Controller & Switch
USB Plug
Roller
Knob
Tripod
/
