YF-R300 RING LIGHT
E-mail: salesus@yangfanlight.com
Website:www.yangfanlight.com
User Manual
Product Introduction
Model : YF-R300
CRI : Ra:＞90
Size : OD-14" /34.5cm ID-11" /27cm
Output : 30W
Dimmer : 0~100%
SMD LED Qty : 224pcs
Color temperature : 3200K~5600K(±200K)
Color Optional:Black
Power Supply : AC:100~240V/50~60Hz(±10%)
Parts Identification
Packing list
Standard
1 x 14" Ring Light
1 x Bluetooth
1 x Tripod
1 x Power Cord
1 x Carring bag
1 x USB cable
1 x Phone holder
1 x User Manual
Hot Shoe(Spare)
Heat Dissipation Hole
ABS Material
Brightness adjustment Knob
Color temperature adjustment
Ring light Locking Knob
USB Port
Power Socket
Ring Light Holder Locking Knob
Overview
Please read user manal before using ring light and ensure that you can
properly handle the operation.
Notice
Never take apart or repair the ring light by yourself,otherwise,void the
warranty service.
Do not expose the ring light to the sun or direct/indirect heat source,must
not be placed in humid surroundings.
Keep hands dry when touch the power cord.Please Shut off power switch
before cleaning the ring light.
Do not switch on and off frequently.
Do not let children under 12 years old who stare too long time at the hard
light.
Do not use it as a daily lighting device, average daily use time do not
exceed 6 hours.
Hot Shoes
YF-R300 RING LIGHT
E-mail: salesus@yangfanlight.com
Website:www.yangfanlight.com
1.Installation of Tripod
2.Installation of Ring Light
3.Installation of accessories
Mount on Phone Holder
Step1:Mount ring light on the tripod after lossening the bottom knob.
Step2:Tighten the bottom knob after placing the ring light on the appropriate position.
Step3:Insert power cord into supply hub and wall socket separately.
Step4:Try to adjust the brightness and color temperature via rotate the relevant knob.
Step1:Assemble the phone holder as Pic.
Step2:Insert the screw of holder into the hot shoe and tighten the lockinh knob.
Step3:Clip phone on,try to bend tube and rotate clip of holder,to adjust the
angle/postion to fit your needs.
Operation Instruction
Thanks for purchasing YANGFAN ring light and finishing reading this user
manual with patience.If you have any questions,please contact us by email
or visit our website as above ,we will reply you as soon as possible.
*Waring:Please pay attention to keep the angle within 0°~ 45°between feet of tripod
and ground.Otherwise,tripod will easily fall when angle sets more than 45°.
Step1:Loosen the knob .
Step2:Take off the protection
cover .
Step3:Open up anyone foot of
tripod.
Step4:Expand all feet of tripod .
Step5:Press the foot of tripod .
Step6:Tighten all locking knob
as you see after adjusting the
height which you need.
/
