Sanyo CLT-136 Simplified Instructions

Type
Simplified Instructions

Sanyo CLT-136 offers up to 12 hours of talk time with its fully charged battery. It supports multiple channels to minimize interference and noise during calls. The security code feature enhances privacy and prevents unauthorized access. The phone's range can be extended by fully extending the antenna. Regularly cleaning the contact points ensures optimal charging performance. If you face challenges, consult the user manual for troubleshooting tips.

Sanyo CLT-136 offers up to 12 hours of talk time with its fully charged battery. It supports multiple channels to minimize interference and noise during calls. The security code feature enhances privacy and prevents unauthorized access. The phone's range can be extended by fully extending the antenna. Regularly cleaning the contact points ensures optimal charging performance. If you face challenges, consult the user manual for troubleshooting tips.

I * SEE THE INSTRUCTION MANUAL FOR MORE DETAILS. I
Start here.
1. instali battery.
J
- Red
PREPARATIONS
Page 5.
4. Chargehancfsetfot’12 hours before use.
ontact points
4
I
z. Extend theantenrsa in full length.
3. CcmnecttheAC adaptor andthe telephone cord.
}
To tele
5. Set security code.
+
PAr3E,’nND
@
Within 8 seconds, press ~
on the base station.
Place the handset in the base station cradle.
See page 7.
IMPORTANT!
Reset the security code if the battery is replaced or after the power is
interrupted.
Please keep this instruction manual in a safe place.
Printed in Malaysia
i
Handset is on
base station
)@f=@.
w,
h!l
..
Handset is not on
%
TA
“-J+ %’;
e
(+’
base station
--l-’j/ %%
Q..
Press ~
@
i-
A
C@ .’ ‘>
“’7
.
0,,
.“- .
Press ~
I-E
..
:~o
CHANNEL
,1. .
000
%
NOTE
000
000
If you experience noise or interference during a call, press the ~] button on the handset to select a clear
~==...
channel. For further details, refer to the instruction manual, page 6.
.
...<
,..!,,,, ,,, ,.. ,.
)
Using handset
Press ~
h=
R
ebg
000
000
000
---
\
Dial a number,
.. .
%
END
Press ~N-
REMEMBER:
,,
:.
Clean the contact points regularly for maximum charging performance. : ‘:’. ,
Resel the security code after replacing the handset battery orapower interruptionl
;1,
When charging handset, make sure the CHARGE indicator lights onthe base station.
..
Your Sanyo cordless phone offers up to 12 hours of continuous Jalktime when thehandset batie~is fully charged.
If youencounter noise during acall, press the~] bultonon thehandset.,
..i, ,,, ,,. c
Y
TROUBLESHOOTING:
Most cordless phone problems can be corrected quickly and easily without service. If you experience difficulties, try the suggestions below before taking your phone
in for service.
1
If the phone doesn’t work at ail
4 Incoming calls donotringonhandaet
Security code mayhave been canceled. To reset, seepage7.
. Handset may betoo far from base station. Move closer.
* AC
adaptor may nOtba pluggedintoa wall oullet or to the base station; + ~ u ,“’
ReceptionIs noisy (interference,humor static)
* Telephonelinemaynot reconnected, . .
Switchtoclearerchannel.
Handset battery may be extremely low. If BA~LOW indicator lights in talk mode,
Base station may betooclose toelectrical equipment. T~anotherlwation.
recharge battery.
Handset meybetoo close to Iarge metal object(s), Move toanother location, or
Q Handset maybe Ioo far from base station. Move cioser.
The operating range seems shorter
“,!,;,.,[i,~,y:
chenge direction while using handset.
Lower base station antenna.
Check the base station location for interfering objects.
.j:; :, t,.,.: .:
If phone still does not work
Extend base station antenna to full length.
,,..1!.,,: .))!,(,
. Reset base station and handset as follows:
Handset battery life or standby time seeme shorter
.7. .
1. Disconnect AC adaptor, and then reconnect AC adaptor to reset base station.
Batteries may not be fully charged, dueto dirty contact points. Wipe with a soft
2, Disconnect then reconnect the handset battery.
cloth.
3. Reset security code.
Handset batteries mayhave been repeatedly recharged before beirig fully'`" ‘“ :
‘:’}i’’ ia:fi~’ri~ ’’””’” ““” ‘“
exhausted. Try Battery Refresh.
Battery may need replacing.
d
  • Page 1 1
  • Page 2 2

Sanyo CLT-136 Simplified Instructions

Type
Simplified Instructions

Sanyo CLT-136 offers up to 12 hours of talk time with its fully charged battery. It supports multiple channels to minimize interference and noise during calls. The security code feature enhances privacy and prevents unauthorized access. The phone's range can be extended by fully extending the antenna. Regularly cleaning the contact points ensures optimal charging performance. If you face challenges, consult the user manual for troubleshooting tips.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI