Whalen 911552 / MAL-77WT-E User manual

Type
User manual

This manual is also suitable for

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Whalen Furniture Manufacturing Page 1 Factory No. 14958
Date 2014-09-09 Rev. 1 Factory: NISHWA
LOT NUMBER:
DATE PURCHASED:
/ /
Vellore Barstool
Model # MAL-77BL-E Black
# MAL-77WT-E White
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
1-866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
Or visit our website www.whalenfurniture.com
Or e-mail your request to parts@whalenfurniture.com
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 2 Factory No. 14958
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Seat (1) B- Pole with Footrest (1)
C- Base (1) D- Gas Lift (1)
(1) 3/4 Bolt Allen Wrench
(4+1 extra) (1)
Tools required
: Allen wench (provided).
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 3 Factory No. 14958
Assembly Instructions
1. Remove all the parts from carton and divide them into part groups as indicated in the parts list.
2. Pick up the Gas Lift (D) and insert the thick end into the center hole of Base (C). Remove the top cover
from the Gas Lift for the following step.
C
D
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 4 Factory No. 14958
Assembly Instructions
3. Position the Seat (A) upside down on a non-abrasive surface with the threaded inserts facing up. Align
the top plate of the Pole with Footrest (B) with the threaded inserts on the Seat; Ensure the Footrest is
pointing towards the front of the Seat. Attach it in place using four 3/4’’ Bolts (1) and tighten with the
enclosed Allen wrench.
NOTE:
Place a protective cover (like the bubble wrap packing material) over the carton to prevent
from scratching the barstool material.
1
A
B
1
3/4” Bolt
(4 used in this step)
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 5 Factory No. 14958
Assembly Instructions
4. Slide the Pole with Footrest (B) onto the top of the Gas Lift (D) and press down until the stool locks in
place.
B
A
C
D
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 6 Factory No. 14958
INFORMATION FOR USE
1. This is one type of barstool for commercial or home use. Please use it only on smooth, even flooring.
2. The height of the seat can be raised up or down by adjusting the right side handle of the mechanism.
3. Please check that all bolts, screws and knobs are tight at least every 3 months or as needed.
4. If parts are missing, broken, damaged or wrong, please stop using this product until repairs are done by a
trained person.
5. Only a trained person may replace or repair seat height adjustment components with energy accumulators.
Do not stand or step on this stool.
Do not sit on the front edge of the stool.
Use only for seating, one person at a time.
Use over smooth, level, seamless surfaces only.
Do not use this stool unless all bolts, screws and knobs are firmly secured.
Do not use stool as a stepladder.
Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation.
Use this stool for its intended purpose only.
Use mild detergent only for cleaning.
Failure to follow these warnings could result in serious injury.
Maximum load weight 136 kg (300 pounds).
LIMITED WARRANTY
We are confident that you will be delighted with your Whalen Furniture Purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or
replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet
your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description
of the problem and obtain return authorization. At its option Whalen Furniture will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component.
The customer must prepay freight on any components returned to the factory. Return freight on
components still in warranty will be paid by Whalen Furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from province to
province (state to state).
Customer Service: 1-866-942-5362
8:30 a.m. - 4:30 p.m., PST, Monday to Friday
www.whalenfurniture.com
THIS UNIT IS INTENDED FOR USE ONLY WITHIN THE
MAXIMUM WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE
MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY, CAUSING
POSSIBLE INJURY.
IF YOU NEED TO ORDER ANY REPLACEMENT PARTS, PLEASE USE THE LIST BELOW
Vellore Barstool
B
A
*MAL-77BL-E-A-S Seat *MAL-77WT-E-A-S Seat
*MAL-77BL-E-B-PF Pole with Footrest *MAL-77WT-E-B-PF Pole with Footrest
*MAL-77BL-E-C-GL Gas Lift *MAL-77WT-E-C-GL Gas Lift
*MAL-77BL-E-D-B Base (diameter 55 cm) *MAL-77WT-E-D-B Base (diameter 55 cm)
*MAL-77BL-E-E-PL Protective Liner (underneath the base) *MAL-77WT-E-E-PL Protective Liner (underneath the base)
*MAL-77BL-E-1-3/4B 3/4" Bolt *MAL-77WT-E-1-3/4B 3/4" Bolt
*
MAL
-
77BL
-
E
-
2
-
M5AW
5mmAllenWrench
*
MAL
-
77WT
-
E
-
2
-
M5AW
5mmAllenWrench
C
D
MAL 77BL E 2 M5AW
5
mm
Allen
Wrench
MAL 77WT E 2 M5AW
5
mm
Allen
Wrench
*MAL-77BL-E-CH Complete Hardware *MAL-77WT-E-CH Complete Hardware
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Whalen 911552 / MAL-77WT-E User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI