Hagerco 4960R - Shim Kit Installation guide

NOTE 2

HEAD CHASSIS

SHIM

NOTE 1

4600 NARROW STILE

EXIT DEVICE

END CAP

SHIM

NOTE 1

NOTE 1: PLACE SHIMS BETWEEN THE EXIT DEVICE AND

DOOR STILES AT THE HEAD CHASSIS AND END CAP.

SHIM KIT INCLUDES:

TWO 1/8" THICK HEAD

CHASSIS SHIMS.

TWO 1/8" THICK END

CAP SHIMS (WITH WIRE

ROUTING HOLE).

MOUNTING SCREWS

(NOT SHOWN).

DOOR

STRIKE

DISTANCE

NOTE 2: ADDING SHIMS MOVES THE EXIT DEVICE

FARTHER AWAY FROM THE DOOR AND THE

STRIKE MUST MOVE WITH THE DEVICE. FOR

EACH SHIM ADD AN 1/8" TO THE STRIKE

DISTANCE.

HAGER COMPANIES

139 Victor Street, St. Louis, MO 63104 - (800) 325-9995 - Fax (800) 782-0149

4960R SHIM KIT INSTRUCTIONS

FOR USE WITH 4600 NARROW STILE EXIT DEVICE

SHEET 1 OF 1

DRAWING NO: I-ED01237

REV: 01

INSTRUCTION NO: 27390056