IVIEW i1000QW Operating instructions

Category
Keyboards
Type
Operating instructions

This manual is also suitable for

Windows Installation Steps
Will work for the I-700QW, I-800QW, I-895QW, I-1000QW, I-1010QW, Cyber-PC.
Things you will need for this process:
1 Keyboard
1 Mouse (optional)
1 Hub
1 Flashdrive (3.0 & 16GB or more)
Preparation
1.) Format the Flash Drive as FAT32 and name the drive WINPE
2.) Extract the .RAR file and copy the extracted files into the flash drive
3.) With the drive formatted and the files copied, It should look like this:
A .RAR extraction program like 7-ZIP
Installation
1.) Connect Keyboard, Mouse, Hub and Flashdrive.
2.) Once everything is connected, power on the device while pressing F7 on the keyboard.
3.) A Blue Screen will Pop Up that states “Please Select Boot Device”, select your usb flash device (in this case, “UEFI
KingstonDataTraveler 3.0PMAP”) and press “enter”
4.) Once Data is loading wait, procedure might take more than 15 minutes.
5.) Wait until screen shows: “x:/windows/system32>____”
6.) Type in “exit” in the blank space “x:/windows/system32>exit” then click “enter”
7.) Take USB out of tablet.
8.) “System Preparation Tool” will pop up, Click “ok”
9.) Windows Tablet is ready to be use.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

IVIEW i1000QW Operating instructions

Category
Keyboards
Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI