Coolcam NIP-25SY User manual

Type
User manual

This manual is also suitable for

Download Dophigo” from App
store for iPhone or Play store for
Android phone.
Make sure your smartphone is
connected to 2.4GHz Wi-Fi router.
Register to create an account and log in.
Open the app and Tap Add device”
button to add camera.
Before setup, make sure battery is
fully charged (Solid Blue LED).
Press and hold call button for 5
seconds. Blue LED light blinks
ready for WiFi set up.
If not, press and hold the reset button
on the back for about 3 seconds until the
WiFi indicator blue light is blinking.
For tech support, email us at support@solocameras.com Or, call 201-934-1654.
1. Download App
2. Turn on Wifi Setup mode
DB2618 Quick Setup Guide
3. One Key WiFi Setup
4. Live View & Playback
Tap on the camera from the list.
Tap “Got it” button to confirm.
Create group name.
Tap on Playback button to see
recorded video and message.
Tap on setting button to change
alarm and time.
While WiFi LED is blinking.
Make sure your phone is connected to
your WiFi network & Start the App
Tap on Smart Doorbell DV2
Your WiFi SSID and password is
automatically loaded.
Tap “Blue light has flashed” button.
Tap “+” button.
For tech support, email us at support@solocameras.com Or, call 201-934-1654.
  • Page 1 1
  • Page 2 2

Coolcam NIP-25SY User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI