LevelOne POT-0100 Datasheet

POT-0100
LevelOne
Brand
LevelOne
Model
POT-0100
Category
Bridges & repeaters
Type
Datasheet

LevelOne POT-0100 is an advanced PoE Repeater that utilizes existing 2-wire infrastructure to extend Fast Ethernet and PoE up to 400 meters. With a maximum data rate of 60 Mbps full duplex, it's ideal for applications such as powering IP cameras, wireless access points, and VoIP phones in remote locations. It supports IEEE 802.3af/at PoE standards and provides up to 15 watts of power to connected devices. Its compact design and easy installation make it a versatile solution for various networking scenarios.

LevelOne POT-0100 is an advanced PoE Repeater that utilizes existing 2-wire infrastructure to extend Fast Ethernet and PoE up to 400 meters. With a maximum data rate of 60 Mbps full duplex, it's ideal for applications such as powering IP cameras, wireless access points, and VoIP phones in remote locations. It supports IEEE 802.3af/at PoE standards and provides up to 15 watts of power to connected devices. Its compact design and easy installation make it a versatile solution for various networking scenarios.

2
PoE Repeater over
2-wire (Master)
POT-0100
The POT system, one master & one slave units, provide
a long-reach Ethernet extension with remote Power-
over-Ethernet (PoE) capability over a 2-wire line.
Connection with a Class 0 PD device, the distance
of two-wire 24AWG cables can be up to 400 meters
when using a 48Watt high power PoE Switch,
FSW-0513/0543. Users may select a xed data rate for
dierent copper line ranging. The maximum data rate
can be up to 60 Mbps full duplex for 2-wire line.
The POT master unit is powered by the local PoE
Ethernet network, and transmits both the data and
power to the remote slave unit over 2-wire cable. The
remote unit regenerates the power and provides the
PoE capability to power up the remote PD device up
to 15 watts when connecting to 48Watt High Power
Switch, FSW-0513. The POT M/S supports the indoor &
outdoor models with wall-mount feature.
Equipped with dip switches, the 2-wire line speed
can be congured to meet dierent line gauges and
distances. A POT pair oers a cost eective solution
for remote power applications such as LAN-to-LAN
connectivity, Video Streaming, FTTB, and MDU/MTU
over single twisted line.
Key Features
- Two-wire cables are used to connect 100Mbps Fast
Ethernet PoE devices
- Maximum distance up to 500 meters for 24 AWG
cable
- Maximum data rate up to 60 Mbps full duplex
- Remote PoE capability for PD devices of WiFi AP, IP
camera, IP telephones
- Up to 15 Watts for remote PoE, Depending on PSE
power
- Easy installation by indoor & outdoor dierent
models
- IEEE 802.3af PSE Compliant for Class 0~3
- Dip Switches for 2-wire line rate settings
- Auto MDIX for 10/100 Base T Ethernet LAN Ports
- Low-Latency for Video/Voice/Data applications
Works Well With
H/W Version: 1
1
1. LED Indicator
2. Dip Switch
3. RJ-11 Out
4. RJ-45 In
2 3 4
POI-4000
High-power PoE Injector
FSW-0513
4-Port High Power PoE Switch
www.level1.com
I
one world_one brand_one level_
3
Ethernet Switches
Technical Specications
Line Interface
Data Rate: 60/60 Mbps
Power: 48V
RJ-11 Connector x 1
LAN Interface
Auto-Detection for 10/100 BASE-T and Half / Full duplex
Full compatible with IEEE 802.3 / IEEE802.3u
Automatic MDIX Function
RJ-45 Connector x 1
PSE
IEEE 802.3af Complaint with Output Voltage within 44~57V
Safety-Extra-Low-Voltage (SELV) Compliant
Maximum output power 15 Watts
LED Indicator:
Power: Green On- indicates power is on and normal
LAN: Green On- indicates Ethernet LAN port is in connection
Flashing- indicates Ethernet LAN data activates
Line: Green On- indicates 2-wire line is in connection
Flashing- indicates 2-wire line is in line handshaking
M/S: Green On-indicates as 2-wire Slave unit
Green O- indicates as 2-wire Master unit
Physical Dimension ( L x W x H ):
120mm x 90mm x 28mm
Operating Environment:
Humidity: 5% ~95% non-condensing
Temperature: 0~50°C
Regulatory Compliance:
FCC Rules Part 15
CE
Product Diagram
Order Information
POT-0100:
PoE Repeater over 2-wire (Master)
Package Contents
POT-0100 x 1, User Manual x 1
All mentioned brand names are registered trademarks and property of their owners. Technical specications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved.
V1.0
Note: These distances are typical results when used with 24AWG RJ-11 Cable
Non-PoE Switch FSW-0513
POT-0100
1m
48W
POT-0110
100m
PoE PD devices
Ethernet Cable (RJ-45)
PoE
Phone Line (RJ 11)
up to 400m
for 2 wire
Indoor to Indoor Solution
Non-PoE Switch POI-4000
POT-0100
1m
40W
POT-0110
100m
PoE PD devices
up to 300m
for 2 wire
Indoor to Indoor Solution
  • Page 1 1
  • Page 2 2

LevelOne POT-0100 Datasheet

POT-0100
LevelOne
Brand
LevelOne
Model
POT-0100
Category
Bridges & repeaters
Type
Datasheet

LevelOne POT-0100 is an advanced PoE Repeater that utilizes existing 2-wire infrastructure to extend Fast Ethernet and PoE up to 400 meters. With a maximum data rate of 60 Mbps full duplex, it's ideal for applications such as powering IP cameras, wireless access points, and VoIP phones in remote locations. It supports IEEE 802.3af/at PoE standards and provides up to 15 watts of power to connected devices. Its compact design and easy installation make it a versatile solution for various networking scenarios.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents