Channel Vision CVT-15PIA User manual

Channel Vision
Brand
Channel Vision
Model
CVT-15PIA
Type
User manual

This manual is also suitable for

Channel Vision CVT-15PIA is a 15dB RF Amplifier designed with the future in mind. Unlike other RF amplifiers, the CVT-15PIA features a bi-directional return path for use with future interactive TV, addressable cable box converters, and ultra-high-speed cable modems. This amplifier provides the lowest induced noise figure available and is ideal for boosting the signal strength of cable or antenna signals. It features a 3dB low noise amplifier with 15dB gain and a flatness of +/-0.8dB from 54-1000MHz. The CVT-15PIA also has excellent return loss and tap-to-tap isolation, making it ideal for use in multi-TV setups.

Channel Vision CVT-15PIA is a 15dB RF Amplifier designed with the future in mind. Unlike other RF amplifiers, the CVT-15PIA features a bi-directional return path for use with future interactive TV, addressable cable box converters, and ultra-high-speed cable modems. This amplifier provides the lowest induced noise figure available and is ideal for boosting the signal strength of cable or antenna signals. It features a 3dB low noise amplifier with 15dB gain and a flatness of +/-0.8dB from 54-1000MHz. The CVT-15PIA also has excellent return loss and tap-to-tap isolation, making it ideal for use in multi-TV setups.

CVT-15PIA
15dB RF Amplifier
234 FISCHER AVENUE z COSTA MESA, CA 92626
(714) 424-6500
z (800) 840-0288 z (714) 424-6510 FAX
http://www.channelvision.com
z E-Mail: [email protected]
Channel Vision
Limited Warranty
Channel Vision Technology will repair or replace any defect in material or workmanship which
occur during normal use of this product with new or rebuilt parts, free of charge in the USA, for
two years from the date of original purchase. This warranty does not cover damages in shipment,
failures caused by other products not supplied by Channel Vision Technology, or failures due to
accident, misuse, abuse, or alteration of the equipment. This warranty extends only to the original
purchaser. A purchase receipt, invoice, or other proof of original purchase date will be required
before warranty repairs are provided.
Mail-in service can be obtained during the warranty period by calling (714) 424-6500. A Return
Authorization number must be obtained in advance and be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights, and you may have other rights (which vary from state
to state). If a problem with this product develops during or after the warranty period, please
contact Channel Vision, your dealer, or any factory-authorized service center.
Description
Channel Vision’s 15dB power injected inline amplifier provides the lowest induced noise figure available and is designed with the
future in mind. Unlike other RF amplifiers, the CVT-15PIA features a bi-directional return path for use with future interactive TV,
addressable cable box converters, and ultra high-speed cable modems.
Instructions
Step 1: Mount amplifier.
Step 2: Connect cable or antenna signal to the INPUT jack.
Step 3: Connect OUTPUT jack to distribute signal to all the TV’s in the house.
Step 4: Connect power to 12VDC input, or use PIA (power injector) for remote
power capability. Note: must use DC passive splitters.
Please Note:
The unused trunk line connector of the last outlet device in each trunk line
MUST BE TERMINATED using a 75Ω terminator (model 2101).
12VDC IN RF INPUT
Channel Vision
MULTI-ROOM AUDIO VIDEO TECHNOLOGY
CVT-15PIA
5-42MHz RETURN PATH PASS
54-1000MHz FORWARD PATH
3dB LOW NOISE AMPLIFIER
15dB GAIN
OUT-PWR
Cable or
Antenna
12VDC IN RF INPUT
Channel Vision
MULTI-ROOM AUDIO VIDEO TECHNOLOGY
CVT-15PIA
5-42MHz RETURN PATH PASS
54-1000MHz FORWARD PATH
3dB LOW NOISE AMPLIFIER
15dB GAIN
OUT-PWR
Cable or
Antenna
HS-3
CVT-PI
880
DC Blocker
Standard Wiring Layout
Layout with Power Injector
Specifications
Parameter Condition Min Typ Max
Gain f=54MHz 13.5 14.5 15.5
f=1000MHz 14.0 15.5 17.0
Flatness 54-1000MHz - +/-0.8 -
Insertion Loss 5-40MHz -1.5 - -0.5
Return Loss IN 5-40MHz - -18 -14
54-750MHz - -20 -16
750-1000MHz - -16 -14
Return loss OUT 5-40MHz - -18 -14
54-750MHz - -20 -16
750-1000MHz - -16 -14
Tap - Tap Isolation 54-1000MHz - - -
2nd Order Input Intercept - 80 - -
3rd order input intercept - 60 - -
Composite Second Order - - - -60
Composite Triple Beat - - -70 -60
Noise Figure 54-60MHz - 3 3.5
60-750MHz - 2.4 3.0
750-1000MHz - 3 4.0
Hum Modulation - - - -70
Return Path Level 5-27MHz - - 60
27-40MHz - - 40
RFI Isolation 5-1000MHz - - -130
DC Current - 70 110 170
Warning
To prevent fire or shock hazard,
do not expose this appliance to
rain or moisture.
© 2002, CHANNEL VISION™
  • Page 1 1
  • Page 2 2

Channel Vision CVT-15PIA User manual

Channel Vision
Brand
Channel Vision
Model
CVT-15PIA
Type
User manual
This manual is also suitable for

Channel Vision CVT-15PIA is a 15dB RF Amplifier designed with the future in mind. Unlike other RF amplifiers, the CVT-15PIA features a bi-directional return path for use with future interactive TV, addressable cable box converters, and ultra-high-speed cable modems. This amplifier provides the lowest induced noise figure available and is ideal for boosting the signal strength of cable or antenna signals. It features a 3dB low noise amplifier with 15dB gain and a flatness of +/-0.8dB from 54-1000MHz. The CVT-15PIA also has excellent return loss and tap-to-tap isolation, making it ideal for use in multi-TV setups.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents