ICP DAS USA M-7080/B/BD/D User manual

Type
User manual
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
1
I-7000 and M-7000 DIO
User’s Manual
Warranty
All products manufactured by ICP DAS are under
warranty regarding defective materials for a period of one
year from the date of delivery to the original purchaser.
Warning
ICP DAS assumes no liability for damages resulting
from the use of this product. ICP DAS reserves the right to
change this manual at any time without notification. The
information furnished by ICP DAS is believed to be accurate
and reliable. However, no responsibility is assumed by ICP
DAS for its use, or for any infringements of patents or other
rights of third parties resulting from its use.
Copyright
Copyright 1999 - 2008 ICP DAS. All rights reserved.
Trademark
The names used for identification only may be registered
trademarks of their respective companies.
Date: 2008/5/26
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
2
Table of Contents
1. Introduction..................................................................................... 6
1.1 More Information.................................................................... 7
1.2 Terminal Assignment.............................................................. 8
1.3 Specifications........................................................................ 23
1.4 Block Diagrams..................................................................... 28
1.4.1 Block Diagram for the I-7041/41D and M-7041/41D. 28
1.4.2 Block Diagram for the I-7042/42D..............................28
1.4.3 Block Diagram for the I-7043/43D..............................29
1.4.4 Block Diagram for the I-7044/44D..............................29
1.4.5 Block Diagram for the I-7045/45D and M-7045/45D. 30
1.4.6 Block Diagram for the I-7050/50D and M-7050/50D. 30
1.4.7 Block Diagram for the I-7050A/50AD ........................31
1.4.8 Block Diagram for the I-7051/51D and M-7051/51D. 31
1.4.9 Block Diagram for the I-7052/52D and M-7052/52D.. 32
1.4.10 Block Diagram for the I-7053_FG/53D_FG and M-
7053/53D............................................................................... 32
1.4.11 Block Diagram for the I-7055/55D and M-7055/55D33
1.4.12 Block Diagram for the I-7058/58D............................ 33
1.4.13 Block Diagram for the I-7059/59D............................ 34
1.4.14 Block Diagram for the I-7060/60D and M-7060/60D34
1.4.15 Block Diagram for the I-7063/63D............................ 35
1.4.16 Block Diagram for the I-7063A/63AD ...................... 35
1.4.17 Block Diagram for the I-7063B/63BD.......................36
1.4.18 Block Diagram for the I-7065/65D............................ 36
1.4.19 Block Diagram for the I-7065A/65AD ...................... 37
1.4.20 Block Diagram for the I-7065B/65BD.......................37
1.4.21 Block Diagram for the I-7066/66D............................ 38
1.4.22 Block Diagram for the I-7067/67D and M-7067/67D38
1.5 Dimensions............................................................................39
1.5.1 Modules without Frame Ground .................................. 39
1.5.2 Modules with Frame Ground .......................................40
1.6 Wiring ................................................................................... 41
1.6.1 I-7041/41D and M-7041/41D wiring........................... 41
1.6.2 I-7042/42D wiring........................................................41
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
3
1.6.3 I-7043/43D wiring........................................................41
1.6.4 I-7044/44D wiring........................................................42
1.6.5 I-7045/45D and M-7045/45D wiring........................... 42
1.6.6 I-7050/50D and M-7050/50D wiring........................... 43
1.6.7 I-7050A/50AD wiring.................................................. 43
1.6.8 I-7051/51D and M-7051/51D wiring........................... 43
1.6.9 I-7052/52D and M-7052/52D wiring........................... 44
1.6.10 I-7053_FG/53D_FG and M-7053/53D wiring........... 44
1.6.11 I-7055/55D and M-7055/55D wiring......................... 44
1.6.12 I-7058/58D and I-7059/59D wiring ...........................45
1.6.13 I-7060/60D and M-7060/60D wiring......................... 45
1.6.14 I-7063/63D, I-7063A/63AD, I-7063B/63BD, I-
7065/65D, I-7065A/65AD and I-7065B/65BD wiring ........46
1.6.15 I-7066/66D, I-7067/67D and M-7067/67D wiring..... 46
1.6.16 Wiring Recommendations.......................................... 46
1.7 Jumper Setting....................................................................... 47
1.8 Quick Start ............................................................................ 48
1.9 Default Settings.....................................................................50
1.10 Configuration Tables........................................................... 51
1.11 DIO Active States ............................................................... 54
1.12 Mounting............................................................................. 55
1.12.1 Din-Rail Mounting..................................................... 55
1.12.2 Piggyback Mounting.................................................. 57
1.12.3 Wall Mounting ........................................................... 58
1.13 Technical Support ............................................................... 59
2. DCON Protocol............................................................................. 60
2.1 %AANNTTCCFF ................................................................. 63
2.2 #**......................................................................................... 66
2.3 #AA00(Data)......................................................................... 67
2.4 #AA0A(Data)........................................................................69
2.5 #AA0B(Data)........................................................................ 71
2.6 #AA1cDD .............................................................................73
2.7 #AAAcDD............................................................................. 75
2.8 #AABcDD............................................................................. 77
2.9 #AAN.................................................................................... 79
2.10 $AA2................................................................................... 81
2.11 $AA4................................................................................... 83
2.12 $AA5................................................................................... 85
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
4
2.13 $AA6................................................................................... 87
2.14 $AAC .................................................................................. 89
2.15 $AACN ...............................................................................91
2.16 $AAF...................................................................................93
2.17 $AALS ................................................................................ 94
2.18 $AAM .................................................................................96
2.19 $AAP...................................................................................97
2.20 $AAPN................................................................................ 99
2.21 @AA ................................................................................. 101
2.22 @AA(Data)....................................................................... 103
2.23 ~AAO(Name).................................................................... 105
2.24 ~**..................................................................................... 107
2.25 ~AA0................................................................................. 108
2.26 ~AA1................................................................................. 110
2.27 ~AA2................................................................................. 112
2.28 ~AA3EVV.........................................................................114
2.29 ~AA4V.............................................................................. 116
2.30 ~AA5V.............................................................................. 118
2.31 ~AAD................................................................................120
2.32 ~AADVV..........................................................................122
3. Modbus RTU Protocol................................................................ 124
3.1 01 (0x01) Read Coils........................................................... 125
3.2 02 (0x02) Read Discrete Inputs........................................... 128
3.3 03 (0x03) Read Multiple Registers ..................................... 130
3.4 04 (0x04) Read Multiple Input Registers............................ 132
3.5 05 (0x05) Write Single Coils .............................................. 134
3.6 15 (0x0F) Write Multiple Coils........................................... 137
3.7 70 (0x46) Read/Write Module Settings............................... 139
3.7.1 Sub-function 00 (0x00) Read module name...............140
3.7.2 Sub-function 04 (0x04) Set module address .............. 141
3.7.3 Sub-function 05 (0x05) Read communication settings
............................................................................................. 142
3.7.4 Sub-function 06 (0x06) Set communication settings . 143
3.7.5 Sub-function 32 (0x20) Read firmware version......... 145
3.7.6 Sub-function 33 (0x21) Set digital input counter trigger
edge.....................................................................................146
3.7.7 Sub-function 34 (0x22) Read digital input counter
trigger edge value................................................................ 147
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
5
3.7.8 Sub-function 39 (0x27) Set the power-on value......... 148
3.7.9 Sub-function 40 (0x28) Read the power-on value .....149
3.7.10 Sub-function 41 (0x29) Set DI/O active states.........150
3.7.11 Sub-function 42 (0x2A) Read DI/O active states..... 152
4. Troubleshooting .......................................................................... 153
4.1 Communicating with the module........................................ 154
A. Appendix.................................................................................... 155
A.1 INIT Mode.......................................................................... 155
A.2 Dual Watchdog Operation.................................................. 157
A.3 Frame Ground ....................................................................158
A.4 Node Information Area ...................................................... 160
A.5 Reset Status........................................................................ 161
A.6 Digital Output.....................................................................162
A.7 Latched Digital Input..........................................................163
A.8 DN Module......................................................................... 164
A.8.1 DN-SSR4................................................................... 165
A.8.2 DN-PR4.....................................................................166
A.8.3 RM-104, RM-108, and RM-116................................ 167
A.8.4 RM-204, RM-208, RM-216 ......................................168
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
6
1. Introduction
The I-7000 series is a family of network data acquisition and
control modules, providing analog-to-digital, digital-to-analog,
digital input/output, timer/counter and other functions. The
modules can be remotely controlled using a set of commands,
which we call the DCON protocol. Communication between
the module and the host is in ASCII format via an RS-485 bi-
directional serial bus standard. Baud Rates are software
programmable and transmission speeds of up to 115.2 Kbps
can be selected.
The functionality of the M-7000 series is the same as the I-
7000 series, with the exception that the M-7000 series offers
extended support for the Modbus RTU protocol.
Some I-7000 modules feature
a new design for the frame
ground and INIT switch as
shown in the figure (rear
view). The frame ground
provides enhanced static
protection (ESD) abilities and
ensures the module is more
reliable. The INIT switch
allows easier access to INIT
mode. Please refer to Sections
A.1 and A.3 for more details.
The I-7000 and M-7000 DIO modules support TTL signal,
photo-isolated digital input, AC voltage digital input, relay
contact output, solid-state relay output, photoMOS output and
open-collector output.
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
7
1.1 More Information
For more information regarding the I-7000 series, please refer
to chapter 1 of the “I-7000 Bus Converter User’s Manual” as
shown below or visit the ICP DAS website
http://www.icpdas.com.
1.1 The 7000 Series Overview
1.2 Related Documentation for the 7000 Series
1.3 Common Features of the 7000 Series
1.4 The 7000 Series System Network Configuration
1.5 7000 Dimensions
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
8
1.2 Terminal Assignment
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
9
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
10
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
11
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
12
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
13
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
14
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
15
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
16
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
17
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
18
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
19
I-7000 and M-7000 DIO User’s Manual, Rev: B1.5 7PH-013-B15
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168

ICP DAS USA M-7080/B/BD/D User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI