Fishbone Offroad FB22049 Installation guide

Brand
Fishbone Offroad
Model
FB22049
Type
Installation guide

This manual is also suitable for

FB22047, FB22048, FB22049
Jeep® TJ Wrangler 1996-2006
Piranha Series TJ Front Bumper
2204700
REQUIRED TOOLS
19mm Socket
15mm Socket
Socket Wrench
KIT CONTAINS
½” Hex Bolt
½” Flat Washer
D-Ring
QTY
6
6
2
FB22049 – no tube FB22048 – winch guard FB22047 - stinger
FB22047 shown with winch* and optional
winch plate* (FB21052).
*Not included
FB22047, FB22048, FB22049
Jeep® TJ Wrangler 1996-2006
Piranha Series TJ Front Bumper
1 2204700
1) REMOVE YOUR FACTORY BUMPER
Begin by removing your factory bumper. Ensure you
disconnect your factory fog lights (if equipped)
before you pull your bumper away.
2) INSTALL YOUR BUMPER
Lift the bumper up to the frame of the Jeep. Secure
the bumper to your frame in the stock bolt locations
with the supplied ½” hex bolts.
3) MOUNT YOUR D-RINGS
4) ENJOY YOUR NEW FISHBONE OFFROAD BUMPER!
  • Page 1 1
  • Page 2 2

Fishbone Offroad FB22049 Installation guide

Brand
Fishbone Offroad
Model
FB22049
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents