A&A Surfaces LVR6520-0018-SN Installation guide

Proﬁ le Specs

Installation Guide

Stair noses are used to ﬁ nish the end of a step

3. 4.

Measure the width of the step

and cut to length.

Carefully roll the stair nose into place

against the front of the step. Press

down ﬁ rmly over the entire stair nose.

Let the adhesive cure according to

directions.

For added security, use ﬁ nishing nails.

Apply a generous

bead of construction

adhesive along the

underside of the

stair nose.

Subﬂ oor

LVT Floor

Riser

V-SN-06

2.23˝

1.03˝