Micro USB charging port
MFB Key
Speaker
Volume down/Previous track
Volume up/Next track
Welcome to the user manual for this comfortable-fit Bluetooth
headset designed by HUSSAR. It uses Bluetooth 4.1 echo
eliminaon technology, provides premium sound quality, and
has an easy hands-free operaon. Before using this product,
please read this manual in detail.
Product Overview
1. Keep the Bluetooth headset within 1 meter or 3.3 feet
when pairing.
2. Make sure the headset is off. Press and hold the
Mul-Funcon Buon for approximately 5 seconds
unl the LED indicator flashes red and blue alternately.
This means the headset is in pairing mode.
3. Enable the Bluetooth funcon in your device. Search for
available Bluetooth devices and select “Magicbuds” from
the list of found devices.
4. If a password or PIN is required, please enter “0000”.
5. If prompted by your mobile phone to connect, select “Yes”.
(This is different among mobile phone models.)
6. Aer successful connecon, the LED indicator will flash
blue twice per 4 seconds.
Warning:
• Please dry the headphones aer each workout.
How to connect
2.If your Bluetooth headset does not reconnect, please
press the MFB 1 me or through your phone’s Bluetooth
menu to reconnect manually.
1.The Bluetooth headset will try to reconnect the mobile
phone automacally.
Reconnect the headset
1.When the Bluetooth headset is turned off, press and hold
the Mul-Funcon Buon for approximately 5 seconds,
unl the LED indicator is flashing red and blue alternately.
This means the headset is in pairing mode.
2.Enable the Bluetooth of mobile phone #1 and search for
the Bluetooth devices. Then select “Magicbuds” to
complete the connecon.
3.Disable mobile phone #1’s Bluetooth and long press the
Mul-Funcon Buon unl the red light is on to turn off
the Bluetooth headset.
4.Turn on the Bluetooth headset again and make it into the
pairing mode.
5.Enable the Bluetooth funcon of mobile phone #2,
Searching for the Bluetooth devices. Then, select
“Magicbuds” to complete the connecon.
6.Enable mobile phone #1’s Bluetooth funcon again and
find the Bluetooth headset “Magicbuds” in the list. Then,
select it to complete 1 to 2 pairings.
Keep your Bluetooth headset close to the cell phone. The
straight unblock distance is about 10 meters (33 feet)
between the cell phone and Bluetooth headset. Beyond
this distance, the sound quality may decline and lose
connecon.
Multi-pairing
* Bluetooth version: V4.1+EDR
* Support profiles: HFP, HSP, AVRCP and A2DP
* Frequency range: 2.4-2.483GHz
* Operaon range: 10 meters or 33 feet
* Working me: About 9 hours
* Standby me: About 240 hours
* Charging me: About 1.5 hours
* Built-in rechargeable 100 mAH lithium-ion polymer baery
Specifications
We guarantee that every product has been seriously tested
before shipping. From the purchase date we offer a 30-day
money-back guarantee and a one-year warranty. For detailed
informaon, please contact our customer service.
Warranty
For any inquiries, issues or comments concerning our products,
please send email to the address below and we will respond as
soon as possible.
E-mail: support@ihussar.com
Website:www.ihussar.com
Contact Us
2)Make sure the mobile phone is within the Bluetooth signal
distance. The maximum distance is 33 feet or 10 meters.
3)Don’t cover the Bluetooth headset with your hand.
3.The Bluetooth headset is connected, but you can’t listen to
music.
Soluons:
1)Check your Bluetooth seng and adjust the sound path to
hands-free mode.
2)Some mobile phones do not have the stereo Bluetooth
module and Bluetooth funcon. Please connect your
Bluetooth headset to other mobile phones to check
whether the headset is okay.
4.How do I use the Bluetooth headset to listen to music or
chat on the computer?
Soluons:
If your computer has Bluetooth funcon, simply enable the
funcon and search for the “Magicbuds” Bluetooth headsets.
If your computer does not have Bluetooth funcon, you need
a Bluetooth adapter. By using Bluetooth soware (IVT), the
adapter can connect the Bluetooth headset with the computer.
5. What’s the Bluetooth pairing password?
Soluons:
The Bluetooth pairing password is “0000”. Most cell phones
support entering the password automacally; in only a small
number of devices will it be necessary to enter the password
“0000” manually.
6.The red light is not on when charging.
Soluons:
If it has been a long me since you have used the Bluetooth
headset, it must be charged for about 30 minutes; then the
red light might be on.
1.The mobile phone can’t find the Bluetooth headset.
Soluon:
1)Check whether the Bluetooth headset is turned on and in
pairing mode. When the indicator light flashes red and blue
alternately, it shows that Magicbuds is in pairing mode.
2)If the Bluetooth headset is turned on and in pairing mode
but sll can’t be found, please try restarng your mobile
phone and Bluetooth headset.
Note: The Bluetooth headset will turn off automacally aer
2 minutes without connecon.
2.Aer connecng the Bluetooth headset with the mobile
phone, it is always disconnected or has noise.
Soluons:
1)The baery is low; please recharge the headset.
FAQ
Magicbuds comes with a built-in rechargeable baery. It is
recommended that you charge the baery fully before its
first use.
1. Plug in the micro USB cable and plug another side to the
USB port of the PC/laptop or into any USB power charger.
- LED indicator red light on: Charging
- LED indicator blue light on: Complete charging
2. It takes about 1.5 hours to get the baery fully charged
Warnings:
• Please do not expose the headphones under direct
sunlight while charging, especially when environment
temperature is high.
• Please avoid water damage. If it happens, do not use any
more.
• Please avoid to use low quality USB charger.
Charging
Hold down the MFB buon for about 3 seconds during
charging, unl the LED indicator flashes with red and blue
light 3 mes to restore the factory sengs.
Restore to factory settings
1 2 3 4 5 6 7
Magicbuds
Pause/play
Short press the MFB
Siri funcon
At the same me press + -
No operaon needed
Automacally enter the
pairing mode aer power on
Previous track
Next track
Volume down
Volume up
Short press volume up
Short press volume down
Long press vol up for 3 seconds
Long press vol down for 3 seconds
LED indicator
Wireless headphone
Earps- 3 pairs(small,
medium, large)
Charging cable
Wire e
Hook
Carrying case
comply foam earps
PACKAGE CONTENTS