Amperes Electronics CS510 Installation Instructions And Instructions For Use

Brand
Amperes Electronics
Model
CS510
Type
Installation Instructions And Instructions For Use
C S 510 / 610
C E I L I N G S P E A K E R S
I N S T A L L A T I O N I N S T R U C T I O N S
www.ampereselectronics.com
STEP 1 : CUT HOLE AT THE CEILING ACCORDING TO THE SPEAKER TYPE
HOLE DIAMETER :
140 MM FOR CS610
175 MM FOR CS810
CEILING BOARD
HOLE
STEP 2 : INSTALL THE SPEAKER ENCLOSURE TO THE HOLE BY SCREWING THE CLAMPS CLOCKWISE
THE ENCLOSURE WILL BE TIGHTENED AGAINST THE BOARD
1. INSERT ENCLOSURE
2. TURN CLAMPING SCREW INSIDE CLOCKWISE
3. ROTATION OF SCREW MOVE THE CLAMP DOWNWARD AND CLAMPS AGAINST THE BOARD
CEILING BOARD
ENCLOSURE
CLAMP
STEP 3 : CABLE TERMINATION
INSERT CABLE VIA ENCLOSURE HOLE AND TERMINATE TO THE SPEAKER ACCORDING TO THE REQUIRED WATTAGE
THE SPEAKER ASSEMBLY WOULD LOCKED TO THE ENCLOSURE TO COMPLETE THE ASSEMBLY PROCESS
STEP 4 : INSTALL THE SPEAKER AND BAFFLE ASSEMBLY TO THE ENCLOSURE
CLAMP
ENCLOSURE
CEILING BOARD
SPEAKER ASSEMBLY
NYLON 2 WAY CONNECTOR
FLEXIBLE CONDUIT
ENCLOSURE
CEILING BOARD
1. INSERT THE SPEAKER ASSEMBLY AND THE CABLES INTO ENCLOSURE
2. TURN TO LOCK SPEAKER ASSY TO ENCLOSURE CLOCKWISE
CS610 INSTALLATION INSTRUCTIONS
TRANSFORMER COLOUR CODE
BLACK : COMMON
RED : 6W
YELLOW : 3W
GREEN : 1 W
the emerging preference
R
CUT OUT DIAMETER : 140 MM
FOR CS510
CUT OUT DIAMETER : 175 MM
FOR CS610
CUT OUT TEMPLATE FOR CEILING SPEAKERS
CS510
CS610
  • Page 1 1
  • Page 2 2

Amperes Electronics CS510 Installation Instructions And Instructions For Use

Brand
Amperes Electronics
Model
CS510
Type
Installation Instructions And Instructions For Use
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents