Ohlins SK741 Mounting Instruction

Ohlins
Brand
Ohlins
Model
SK741
Type
Mounting Instruction

This manual is also suitable for

Ohlins SK741 is a high-performance, center shock absorber designed for snowmobiles. It features a 108 mm total length and a 348 mm stroke. The SK741 is adjustable for rebound (6 mm) and compression (348 mm), allowing you to fine-tune the suspension to your riding style and conditions. The shock absorber also features preload adjustment, which allows you to adjust the spring rate to accommodate different rider weights and riding conditions.

The SK741 is easy to install, with clear and concise mounting instructions included.

Ohlins SK741 is a high-performance, center shock absorber designed for snowmobiles. It features a 108 mm total length and a 348 mm stroke. The SK741 is adjustable for rebound (6 mm) and compression (348 mm), allowing you to fine-tune the suspension to your riding style and conditions. The shock absorber also features preload adjustment, which allows you to adjust the spring rate to accommodate different rider weights and riding conditions.

The SK741 is easy to install, with clear and concise mounting instructions included.

MOUNTING INSTRUCTION
Brand
SKI-DOO
Model
SC-10 High-Performance, Center
Year
1998
Art. No.
SK 741
Total length
348
mm
Stroke
108
mm
Reb.click
--
Comp.click
--
Preload
6
mm
Supplementary parts
192-01
710-01
Sticker / Dekal (2x)
Hook spanner / Haknyckel (2x)
Owners manual / Instruktionsbok
Mounting instructions
1. Lay the snowmobile on its side for better access to
the shock absorber, spread out suitable material on
floor to protect the finish on the hood and belly pan.
2. Release the tension on the limiter straps (i.e. the belt
limiting front suspension travel upon rebound).
Please note the position on the screw.
3. Remove upper and lower shock absorber bolt.
Remove the stock shock absorber.
4. Mount the Öhlins-shock absorber with the body
upwards and the gas valve pointing forwards. Mount
the shock absorber bolts.
6. Tension the limiter straps to the same position.
7. Make sure that all bolts are tightened.
1. Lägg snöskotern på sidan, för att lättare komma åt
stötdämparen. Lägg något lämpligt material på
golvet för att skydda lackeringen.
3. Släpp på balata remmens spänning. Notera
positionen på skruven.
4. Demontera stötdämparskruvarna och demontera
original stötdämparen.
5. Montera Öhlins stötdämparen med kolvstången
nedåt och gas nippeln uppåt-framåt. Montera
stötdämparskruvarna.
6. Spänn ballata remmen till samma läge som tidigare.
7. Se till att samtliga skruvar är åtdragna.
Öhlins Racin
g
AB frånsä
g
er si
g
allt ansvar för
skada på stötdämpare, motorc
y
kel eller person om
inte monterin
g
s- och skötsel instruktionerna har
föl
j
ts till fullo. In
g
en
g
aranti kan
g
es på funktion
eller livslängd om dessa instruktioner inte följts
Öhlins Racin
g
AB can not be responsible for an
y
dama
g
e to shock absorber, motorc
y
cle or person if
the mountin
g
- and maintainin
g
instructions are not
followed exactl
y
. Also no
g
uarantee can be
g
iven
for the performance and reliabilit
y
if these
instructions are not followed.
  • Page 1 1

Ohlins SK741 Mounting Instruction

Ohlins
Brand
Ohlins
Model
SK741
Type
Mounting Instruction
This manual is also suitable for

Ohlins SK741 is a high-performance, center shock absorber designed for snowmobiles. It features a 108 mm total length and a 348 mm stroke. The SK741 is adjustable for rebound (6 mm) and compression (348 mm), allowing you to fine-tune the suspension to your riding style and conditions. The shock absorber also features preload adjustment, which allows you to adjust the spring rate to accommodate different rider weights and riding conditions.

The SK741 is easy to install, with clear and concise mounting instructions included.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers