Ohlins SU811 Mounting Instruction

Type
Mounting Instruction

Ohlins SU811 is a high-performance shock absorber designed to improve the handling and comfort of your Suzuki GSX 1100 F. With 12mm of preload adjustment, 340mm of total length, and 12 rebound clicks, you can fine-tune the suspension to suit your riding style and conditions. The SU811 is easy to install, with detailed instructions included. It comes with supplementary parts like stickers, ty-raps, and a memo sticker for your convenience. Experience the legendary performance of Öhlins with the SU811 shock absorber, engineered to enhance your riding experience.

Ohlins SU811 is a high-performance shock absorber designed to improve the handling and comfort of your Suzuki GSX 1100 F. With 12mm of preload adjustment, 340mm of total length, and 12 rebound clicks, you can fine-tune the suspension to suit your riding style and conditions. The SU811 is easy to install, with detailed instructions included. It comes with supplementary parts like stickers, ty-raps, and a memo sticker for your convenience. Experience the legendary performance of Öhlins with the SU811 shock absorber, engineered to enhance your riding experience.

MOUNTING INSTRUCTION
Brand
SUZUKI
Model
GSX 1100 F
Year
1988-93
Art. No.
SU 811
Total length
340
mm
Stroke
61
mm
Reb.click
12
Comp.click
Preload
12
mm
Supplementary parts
192-01
231-01
1180-01
Sticker / Dekal (2x)
Ty-rap / Buntband (2x)
Memo sticker / Memodekal
Owners manual / Bruksanvisning
Mounting instructions
1.
Ställ MC:n på centralstödet.
2.
Demontera sadel och sidopaneler.
3.
Lossa och demontera försnningsanordningen.
Lossa och demontera stötdämparskruvarna och
demontera stötdämparen nedåt.
4.
Montering av den nya Öhlin-dämparen sker genom
att först föra upp justercylindern och vidare ut på
höger sida (se skiss). Följ efter med stötdämparen
och montera övre stötdämparskruven. Montera även
hydrauljusteringen vid ljuddämparens bakre
fästskruv.
5.
Lyft bakhjulet och montera nedre
stötdämparskruven. Drag åt samtliga skruvar.
6.
Montera sidopaneler och sadel.
1.
Put the motorcycle on the center stand.
2.
Remove the seat and side covers.
3.
Loosen and remove the preload adjuster. Loosen and
remove the shockbolts and remove the shockabsorber
downwards.
4.
Mounting of the new Öhlin-shockabsorber will start
by pulling the hydraulic preload adjuster up and out
on the right side and the shockabsorber itself
upwards. Mount the upper shockbolt. Mount the
bracket to the preload adjuster at the rear mounting
bolt of the silencer (see fig.).
5.
Lift the rear wheel and mount the lower shockbolt.
Make sure that all bolts are tightened.
6.
Mount the side covers and the seat.
Öhlins Racin
g
AB frånsä
g
er si
g
allt ansvar för
skada på stötdämpare, motorc
y
kel eller person om
inte monterin
g
s- och skötsel instruktionerna har
föl
j
ts till fullo. In
g
en
g
aranti kan
g
es på funktion
eller livslängd om dessa instruktioner inte följts
Öhlins Racin
g
AB can not be responsible for an
y
dama
g
e to shock absorber, motorc
y
cle or person if
the mountin
g
- and maintainin
g
instructions are not
followed exactl
y
. Also no
g
uarantee can be
g
iven
for the performance and reliabilit
y
if these
instructions are not followed.
  • Page 1 1
  • Page 2 2

Ohlins SU811 Mounting Instruction

Type
Mounting Instruction

Ohlins SU811 is a high-performance shock absorber designed to improve the handling and comfort of your Suzuki GSX 1100 F. With 12mm of preload adjustment, 340mm of total length, and 12 rebound clicks, you can fine-tune the suspension to suit your riding style and conditions. The SU811 is easy to install, with detailed instructions included. It comes with supplementary parts like stickers, ty-raps, and a memo sticker for your convenience. Experience the legendary performance of Öhlins with the SU811 shock absorber, engineered to enhance your riding experience.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages